urmet domus 1183/2 User manual
2
−−−−
sec.4b 2 VOICE - Technical Manual
DOOR PHONE APARTMENT STATIONS
COMFORT SIGNO DOOR PHONE
Ref.1183/2
Signo door phone recalls the style of Signo video door phone.
Designed by architect Citterio, Signo door phone has a perfectly at
surface harmonized with the absence of corners.
On the front panel there are the button for door opening, backlit by
leds, and 3 buttons for additional services as intercom calls, opening
of the second electric lock, etc.
Signo door phone has an electronic management of the call ring
tone with a loudspeaker dedicated to this function, placed under the
handset. Also the switch used to adjust the call volume with “Mute”
function is hid by the handset.
When the switch is in “Mute” position, a little red ag comes out of the
door phone body to indicate the absence of the call ring tone.
Call voume Call voume Excluded call
BUTTONS FUNCTION
State
Button
Idle and on
hook
Pedestrian
door lock
release
Pedestrian
door lock
release
Pedestrian
door lock
release
Pedestrian
door lock
release
Driveway door
lock release
Driveway door
lock release
Driveway door
lock release
- - - -
Off-hook
waiting time
(call received) - - - -
Speaking - - - -
Idle and
off hook
Intercom call
(default: not
programmed)
Intercom call
(default: not
programmed)
Intercom call
(default: not
programmed)
TERMINAL PINS DESCRIPTION
Line
}
Bus Line
Line
CP
}
Floor call
CP
S+
}
Additional ringer
S-
TECHNICAL CHARACTERISTICS
Power supply voltage: 36 ÷ 48Vdc
Current consumption in standby: 3,0mA max
Max. current consumption: 70mA max
Operating temperature range: -5°C ÷ +45°C
Reference standards: EN 61000-6-3
EN 61000-6-1
Max. humidity: 90% UR
Default values:
All door phones have the following factory default setting:
USER = 127
INTERNAL = 0
Line termination = ON
Line termination
For programming procedure, see the section “System installation
and activation”.
INSTALLATION
To install Signo door phone perform the following operations:
1. Remove the door phone cover.
2. Fix the base to the wall with the provided screws and screw
anchors.
3. Congure the programming dip-switches and connect the door
phone to the system.
4. Mount again the cover.
§
COMFORT SIGNO DOOR PHONE
TECHNICAL CHARACTERISTICS - INSTALLATION
COMFORT SIGNO DOOR PHONE Ref. 1183/2
sec.4b
−−−−
3
2 VOICE - Technical Manual
DOOR PHONE APARTMENT STATIONS
OPTIONAL PROGRAMMING
In 2VOICE system each user can select the door phone call ring tone
and the oor call ring tone among the 5 available ones.
DOOR PHONE CALL RING TONE
1. By keeping the door lock release button pressed, press and
release the button .
2. The apartment station emits a call ring tone.
3. By keeping the door lock release button pressed, press again the
button to change the call ring tone.
4. When the call ring tone has been selected, release the door lock
release button.
5. The call ring tone is programmed.
The selected call ring tone is the same for all door phone calls.
However, the call ring tone source can be identied thanks to the call
ring tone timing:
Call source Time Ring total duration
Main call station 3 s ON 3 s
Secondary call
station
0,4 s ON 0,2 s OFF
for 5 times
2,8 s
Intercom 0,5 s ON 0,5 s OFF
for 3 times
2,5 s
Switchboard 0,1 s ON 0,05 s OFF
for 3 times pause
0,2 s repeated for 5
times
2,8 s
FLOOR CALL RING TONE
1. By keeping the door lock release button pressed, press and
release the button .
2. The apartment station emits a call ring tone.
3. By keeping the door lock release button pressed, press again the
button to change the call ring tone.
4. When the call ring tone has been selected, release the door lock
release button.
5. The call ring tone is programmed..
PROGRAMMING DATA DELETING
To delete all optional programming data (intercom call codes), perform
the following operations:
By keeping the door lock release button pressed, pick the handset
up.
Press at the same time the buttons and and keep them pressed
for 3 seconds until a tone conrming the deletion is emitted.
Release the buttons and and hang the handset up.
The deleting procedure does not change the previously selected
call ring tones.
•
•
•
§
COMFORT SIGNO DOOR PHONE
OPTIONAL PROGRAMMING - PROGRAMMING DATA DELETING
COMFORT SIGNO DOOR PHONE Ref. 1183/2
Other urmet domus Intercom System manuals
urmet domus
urmet domus 1139/2 User manual
urmet domus
urmet domus 1060/71 User manual
urmet domus
urmet domus 1039/18 Quick guide
urmet domus
urmet domus iPercom VOG 5+ 1761 Installation and operation manual
urmet domus
urmet domus miro 1183 User manual
urmet domus
urmet domus VOG 5W 1760 Operating instructions
urmet domus
urmet domus 1051/025 User manual
urmet domus
urmet domus iPer com 1717 System manual
urmet domus
urmet domus NVR NEIUS Series User manual
urmet domus
urmet domus IPerVoice 1039 User manual
urmet domus
urmet domus 1150/1 User manual
urmet domus
urmet domus 2voice Sinthesi 1083/9 User manual
urmet domus
urmet domus 1133 User manual
urmet domus
urmet domus SIGNO 1740 Instruction Manual
urmet domus
urmet domus IPerCom User manual
urmet domus
urmet domus 2VOICE 1760 Installation and operation manual
urmet domus
urmet domus DIGIVOICE K-Steel Series User manual
urmet domus
urmet domus 1183 User manual
urmet domus
urmet domus IPERVOICE SYSTEM User manual
urmet domus
urmet domus 1183 User manual
