Uovision UV572 User manual
Panoramic Infrared Scouting Camera
UV572 Instruction Manual
(For UV572 Model)
Quick Start
1. Load the fully charged AA batteries, 12(recommended), 8 or
4(emergency); or connect 6V external power supply;
2. Insert the SD card (32GB or smaller)
Please note if you don’t insert the SD card, the camera will
not work.
3. Slide the power switch to the “SETUP” position to set up the
camera;
4. Press the “MENU” button to enter into the program menu, then
press the “up” or “down” arrow buttons for parameter settings as
described in the user’s manual. Press the “OK” button to save
parameter settings and exit;
Please note if there is no operation for about 3 minutes, the
camera will automatically shut down to save power. If you
want to continue, please toggle the power switch to SETUP
and enter MENU again.
5. Place the camera at the target area and turn on the camera（slide
the power switch to “ON”）, the camera will take pictures or videos as
preset in step 4;
6. Press the “ ” button to capture photos or record a video
manually;
7. Press the “ ” button to playback the pictures/videos. Use the
“up” or “down” arrow buttons to scroll through pictures on the color
monitor;
8. To delete an image in SETUP mode, press the “ ” button to
review the image and then press the “DEL” button to delete the
image.
Key Notes
a. “MENU”: enter the program menu in preview mode.
b. “▲”“▼”“◄”“►”: for parameter settings as described in the user’s
manual.
“▲” is the shortcut to choose “Video”, while “▼” for the “Photo”.
c. “OK”: save parameter settings and play videos.
d. “ ”: exchange between playback and preview.
e. “DEL”: delete an image.
f. “ ”: capture a photo or record a video manually.
g. Switch: OFF: turn off the power; SETUP: change camera settings;
ON: enter working mode.
1 Instruction
Page 1
1Instruction
1.1 General Description
Congratulations on your purchase of UV572 panoramic infrared
scouting camera. UV572 is a powerful and reliable performance
panoramic game camera.
Features:
12MP panoramic hunting camera (5MP real);
3 motion sensors cover 100°detection;
Wide lens: Field of view of 110°;
1080P/720P day/night high definition video with sound;
1 second trigger speed;
Three camera mode: photo, video, photo+video;
Time lapse;
SD card over write to ensure cycle use;
It is water resistant.
1.2 Camera Body Interfaces
Take a few moments to familiarize yourself with the camera
controls and displays. It is helpful to bookmark this section and refer
to it when reading through the rest of the manual.
Fig 1: Front View
1 Instruction
Page 2
Fig 2: Operation Interface
Fig 3: Bottom view
Operation Panel
Power Switch
Battery Depot
Lock Hole
SD-card Slot
DC In
Bottom Screw
Display Screen
USB
Mounting
Holes
1 Instruction
Page 3
Key Notes：
a. “MENU”: enter the program menu in preview mode.
b. “▲”“▼”“◄”“►”: for parameter settings as described in the user’s
manual.
“▲”is the shortcut to choose “Video”, while “▼”for the “Photo”.
c. “OK”: save parameter settings.
d. “ ”: exchange between playback and preview.
e. “DEL”: delete an image.
f. “ ”: capture a photo or record a video manually.
g. Switch: OFF: turn off the power; SETUP: change camera
settings; ON: enter working mode.
h. DC plug in diameter：4.0mm*1.7mm.
2 Quick Introductions
Page 4
2. Quick Start Guide
2.1 Power Supply
To supply power for the camera, 4, 8 or 12 size AA batteries are
needed. The following batteries with 1.5V output can be used:
1. High-density and high-performance alkaline batteries
(Recommended)
2. Rechargeable alkaline batteries
3. Rechargeable NiMH batteries
Pay attention to the (+) or (-) molded into each sleeve to
determine if you insert the positive or negative end into the sleeve
first.
2.2 Insert the SD-card
Open the bottom cover and insert an SD-card into the card slot.
Please note that the SD-card is on the “write” (not locked) position
otherwise the camera will not function correctly.
2.3 Power on and Enter into the ON Mode
Before switching on, please pay attention to the following:
1. Avoid temperature and motion disturbances in front of the
camera such as a big leaf, curtain, air-conditioner, air outlet of
the chimney and other heat sources to prevent from false
triggering.
2 Quick Introductions
Page 5
2. The height from the ground for placing the camera should vary
with the object size appropriately. In general, four to six feet
is preferred.
Slide the power switch to the ON position to power on the camera
and enter into the ON mode.
2.4 Enter into the SETUP Mode
Slide the power switch to the SETUP position and enter into the
SETUP mode. There are some functions in SETUP mode: custom
settings, manual capture and playback.
2.4.1 Custom Settings
Press MENU on the user interface to enter into the menu setting.
The camera can be adjusted to manually customize the camera
settings which display on the LCD screen on the camera. The detailed
operations will be described in the “Advanced Operations” chapter.
2.4.2 Manual Capturing
You can press to manually capture photos or record a video.
2.4.3 View Images or Videos
Use LCD screen to view the captured images or videos:
Press to view images, the latest image or video will be shown
in the LCD screen on the camera. Press UP to view the previous
image and press DOWN for the next.
The detailed operations like deleting images or videos will be
described in the “Advanced Operations” chapter.
2.5 Power Off
Slide the power switch to the OFF position to power off the camera.
Please note that even in the OFF mode, the camera still consumes a
small amount of battery power. Therefore, please remove the
batteries if the camera is not in use for some time.
3 Advanced Operations
Page 6
3 Advanced Operations
To view the camera settings, switch the camera to SETUP mode
and press MENU, the main menu and the default settings are under
below charts:
Setting Items Description
CAM
Camera Mode
Choose Photo, Video, or Photo+Video.
The default setting is Photo. If you
choose Photo+Video, the camera will take
a 5MP photo and a 10s video.
Photo Size
Choose the image size, e.g. 5MP, 8MP,
12MP or 3MP. The default setting is 5MP.
（Please keep in mind the higher the MP,
the larger the file and the faster your SD
card can fill up.）
Photo Burst
Choose the continuous shooting numbers
after each triggering. The default setting
is 1 Photo.
Video Size
Choose the video size, e.g. 1080P, 720P,
WVGA. The default setting is 720P.
Video Length
Set the video length as of required. The
default setting is 10 Sec. (Please note
long videos fill the SD card up quickly.)
Video Sound
Choose On/Off the sound when recording
a video. The default setting is On.
PIR
PIR Trigger
Turn On/Off the motion detection
function. The default setting is On.
This camera has 3 motion sensors
and it covers 100°detection angle.
Trigger
Interval
The duration the camera will stop
detecting motion after each triggering.
The default setting is 1 Min. This option
prevents from taking too many photos or
videos. For example: If trigger interval is
set to 1 Min, the camera will wait 1 minute
between photo/video recordings with
motion.
3 Advanced Operations
Page 7
Time Lapse
Time lapse function defines the camera
records/captures automatically every
preset time period (5seconds~8hours),
which doesn’t work if it is set to Off. The
default setting is Off.
Start-Stop
Start-stop “On” means that the camera
works only during that preset time;
Start-stop “Off” means that the camera
works round the clock. The default setting
is Off.
Two working periods can be set on
this camera.
SYS
Set Clock
Enter to set the date and time
Time Stamp
Choose "On" or "Off" to show the time
stamp on the picture or not. The default
setting is On.
Flash Range
Infrared Flash range: 6m/20ft and 12m/
40ft. The default setting is 12m/40ft.
Field Aiming
Turn On/Off the light-assisted positioning.
The default setting is Off.
Password
The default password is 0000. Choose
OFF to stop this function. The default
setting is Off.Please make sure you
write down your password or store it
in your phone so you don’t lose it.
Language
English（Preset），we provide the choice for
customer to choose the language, pls
contact your distributor for assistance.
Beep
Customer can choose ON/OFF when
operating the cameras. The default
setting is On.
Overwrite
ON/OFF, if choose “ON” the camera writes
off the previous taken pictures when the
SD card is full and continues to record new
pictures/videos , thus, the SD-card is
recyclable, customer needs not to change
SD card frequently. The default setting is
Off.
Format
Format the SD-card.
Table of contents
Other Uovision Scouting Camera manuals
Uovision
Uovision UM785-HD User manual
Uovision
Uovision UM785-4G User manual
Uovision
Uovision UM595-HD-3GE User manual
Uovision
Uovision GLORY LTE User manual
Uovision
Uovision GLORY LTE CELLULAR User manual
Uovision
Uovision UM795-HD User manual
Uovision
Uovision UV785-HD User manual
Uovision
Uovision UM785-HD User manual
Uovision
Uovision UM565-SMS 12MP User manual
Uovision
Uovision Illuminator UV567 User manual
