UNIVIEW OET-515H User manual
Visual Intercom Face Recognition Terminal
User ManualⅡ
Document Version: V1.00
Thank you for purchasing our product. If there are any questions, or requests, please do not hesitate to contact
the dealer.
Disclaimer
No part of this manual may be copied, reproduced, translated, or distributed in any form or by any means without
prior written consent from Uniview.
The manual may be updated from time to time due to version upgrade or other reasons.
The manual is for reference only. All the statements, information, and suggestions contained herein do not
constitute warranties of any kind, express or implied.
Uniview shall not under any circumstances be liable for any special, consequential, incidental or indirect damages
arising from the use of this manual or Uniview's product, including but not limited to any loss of commercial
profits, losses caused by missing data or documents, and anomalies during product running or information leakage
due to cyber attacks, hacker attacks, or virus attacks.
Safety Precautions
CAUTION!
The default password is used for your first login. To ensure account security, please change the password after
your first login. You are recommended to set a strong password (no less than eight characters).
Before performing operations, be sure to carefully read through and observe safety specifications in this manual.
Screenshots provided in this document are used as examples only and the UI layout varies with versions.
This manual applies to multiple models but the models are not completely listed herein. Refer to actual
products while reading this manual.
Zhejiang Uniview Technologies Co., Ltd. (hereinafter referred to as "Uniview") reserves the right to
modify the content in this manual without prior notice or prompt, but Uniview does not ensure that
this manual is completely error-free.
Subject to uncertain factors such as the physical environment, actual values of data may differ from the
reference values described here. In case of any question or dispute, the right of final interpretation
resides with Uniview.
Follow operation instructions in this manual when using the product. Uniview is not responsible for
problems caused by the violation of the instructions. Thank you for your cooperation.
Environmental Protection
This product has been designed to comply with the requirements on environmental protection. For the proper
storage, use and disposal of this product, national laws and regulations must be observed.
Conventions
The figures, charts or photos in this manual are used for illustration only, which may differ from the
actual product.
This manual applies to multiple models but the models are not completely listed herein. Refer to actual
products while reading this manual.
Subject to uncertain factors such as the physical environment, actual values of some data may differ
from the reference values described here. In case of any question or dispute, the right of final
interpretation resides with Uniview.
Follow this manual when using the product. Professional guidance is recommended.
Notational conventions used in this document are described as follows:
Format
Description
Boldface
Indicates buttons, menus, tabs, window names, dialog names, and parameter names. For example, click
OK or select Device Management.
" "
Indicates messages. For example, "Hanging Up" is displayed on the interface.
>
Directs you to go to a multi-level menu. For example, go to Device Management > Add Device. In this
example, Add Device is a submenu under Device Management.
The symbols in the following table may be found in this manual. Carefully follow the instructions
indicated by the symbols to avoid hazardous situations and use the product properly.
Symbol
Description
WARNING!
Contains important safety instructions and indicates situations that could cause bodily injury.
CAUTION!
Means reader be careful and improper operations may cause damage or malfunction to product.
NOTE!
Means useful or supplemental information about the use of product.
i
Contents
1Application Scope of the Manual ·····························································································1
2Product Overview ···············································································································1
3Product Appearance············································································································1
4 Product Installation···········································································································4
5Local Operations ················································································································4
5.1 Initial Interface ·············································································································· 4
5.2 Main Interface ··············································································································· 5
5.3 Ad Mode······················································································································ 7
5.4 Mask/Temperature Measurement Interface ········································································ 9
5.5 Activation Config ···········································································································14
5.5.1 Basic Info ···········································································································15
5.5.2 Device Location ····································································································16
5.5.3 Network Setting ···································································································17
5.5.4 User Management·································································································18
5.5.5 Activation Password·······························································································21
5.5.6 Admin Password ···································································································22
5.5.7 Authentication Scene ·····························································································22
5.6 Call Operations on Visual Intercom Face Recognition Terminal ·····················································24
5.6.1 Call Resident ·······································································································24
5.6.2 Call Management Center ·························································································26
5.7 Door Opening Method ····································································································27
5.7.1 Face Scan-based Door Opening··················································································27
5.7.2 Password-based Door Opening··················································································29
5.7.3 Card Swiping-based Door Opening··············································································31
5.7.4 QR Code-based Door Opening ···················································································31
5.7.5 Remote Opening···································································································31
6Personnel Management ····································································································· 32
6.1 Personnel Information Input ·····························································································32
6.1.1 Information Import to the Terminal ············································································32
6.2 Personnel Deletion·········································································································33
7Web Operations··············································································································· 33
7.1 Login ·························································································································33
7.1.1 Preparation·········································································································33
ii
7.1.2 Logging In to the Web Interface ·················································································35
7.2 Photo·························································································································36
7.2.1 Photo List Sorting··································································································37
7.2.2 Total Capacity/Available Capacity ···············································································37
7.2.1 Photo Naming Rules·······························································································37
7.2.2 Refreshing the Photo Library ····················································································38
7.2.3 Exporting Records ·································································································38
7.2.4 Exporting Photos ··································································································38
7.2.5 Deleting a Photo ···································································································38
7.2.6 Exporting and Deleting Photos ··················································································39
7.3 Parameter Configuration··································································································40
7.3.1 Common ············································································································40
7.3.2 Network·············································································································58
7.3.3 Image················································································································58
7.3.4 Intelligent···········································································································67
7.3.5 Events ···············································································································83
7.3.6 Storage··············································································································86
7.3.7 Security ·············································································································86
7.3.8 System ··············································································································88
8Live View ······················································································································· 91
9FAQs····························································································································· 92
1
1 Application Scope of the Manual
Table1-1 Application Scope of the Manual
Model
Name
OET-515H
Face Recognition Access Control Terminal
OET-213H
Face Recognition Access Control Terminal
OET-523L
Face Recognition Terminal
2 Product Overview
Visual intercom face recognition terminal ("the face recognition terminal" for short) is a face recognition access
control product featuring high performance and high reliability. The UNV face recognition technology is perfectly
integrated into the access control device, which relies on deep learning algorithm, to support face authentication
to open the door and achieve precise control of human. Moreover, using remote control to open the door is also
supported via indoor monitor. And it can be widely applied to the scenarios of building systems, such as smart
communities, public security, parks and other important areas.
3 Product Appearance
The figure below shows the structure of the device. The actual device shall prevail.
OET-515H
Figure3-1 Device Structure
2
1.Light supplement lamp 1
2.Camera 1
3. Infrared light supplement lamp
4.Camera 2
5.Light supplement lamp 2
6.Display screen
7.Loudspeaker
8.Microphone
9. USB2.0
10.Network interface 1
11.Network interface 2
12.16-pin interface
13.14-pin interface
14.Tamper proof button
15.Power input (DC 12V±25%)
OET-213H
Figure3-2 Device Structure
1.Light supplement lamp 1
2.Camera 1
3. Infrared light supplement lamp
4.Camera 2
5.Light supplement lamp 2
6.Display screen
7. Pass-through indicator
8.Microphone
9. Card reading area
10.Loudspeaker
3
11.Reset
12.USB2.0
13.Network interface
14.Power input (DC 12V±25%)
15.20-pin interface
16.Tamper proof button
OET-523L
Figure3-3 Device Structure
1.Light supplement lampx2
2.Camera 1
3. Infrared light supplement lamp
4.Camera 2
5.Display screen
6. Pass-through indicator
7.Microphone
8.Loudspeaker
9.WIEGAND_OUT
10.WIEGAND_IN
11.RS232
12.RS485
13.Network interface
14.ALARM_IN
15.IO-1
16.IO-2
17. USB
18.Power output (DC 5V)
19.Power input (DC 12V±25%)
4
4 Product Installation
Installation of OET-515H
For the wiring and installation of the device, refer to the ET-S51H@B Face Recognition Access Control Terminal
Quick Guide.
Installation of OET-213H
For the wiring and installation of the device, refer to the ET-B31H-M@B Face Recognition Access Control Terminal
Quick Guide.
Installation of OET-523L
For the wiring and installation of the device, refer to the ET-S32L@W Face Recognition Terminal Quick Guide.
5 Local Operations
5.1 Initial Interface
When the face recognition terminal is used for the first time or the factory defaults are restored, users need to
set the activation password, which is used to log in to the Activation Config interface.
NOTE!
The password must contain at least eight characters (including at least two of the following types: upper case
letters, lower case letters, digits, underscores, and hyphens).
The activation password is consistent with the password for the admin to log in to the Web interface. If the
activation password is changed, use the new password to log in to the Web interface.
After the activation password is configured, the main interface of the visual intercom face recognition terminal is
displayed. If the activation password needs to be changed later, refer to "Activation Password" to change the
password.
Figure5-1 Activation Password Configuration Interface
5
5.2 Main Interface
The main interface displayed on the face recognition terminal varies with the device type.See Device Info.
Figure5-2 Main Interface (Video Intercom Mode)
No.
Description
1
Displays the current date, time, and connection status of different services.
indicates the following items from left to right:
Whether to enable the face scan mode
Whether an ID card reader is connected properly
Whether server 1 is online
Whether server 2 is online
NOTE!
An icon marked with indicates "No".
2
Total：total number of detected people.
Normal：Number of people with normal temperature
This interface is only displayed when the temperature measurement function is enabled. For detailed
operation description, see “Advanced Setting”.
3
Displays the photo and name of an identified person in the library. Refer to Recognition Result Displayto
enable the face recognition terminal to display one or more registered face pictures.
When Multiple Faces is selected, information about the latest person identified successfully, is displayed
on the left of the screen. The interface can display information about five recent persons identified
successfully at most.
Test
This manual suits for next models
2
Table of contents
