Universal Remote Control URC-SR3 User manual
URC-SR3
Remote Control
Owner’s Manual
Congratulations!
With your new URC-SR3 Remote Control,
you now have the power to control your
home entertainment system with just one
easy-to-use control. Thousands of audio and
video component codes have already been
programmed into the remote for you, making
it a breeze to set up. Be sure to install the
included batteries first. See page 6 for
instructions.
Quick Set-up
Set-up one component at a time, and
you’ll move quickly through your system.
STEP 1: Turn on the component you want to
activate. (Other components can be on or
off, it doesn’t matter.)
STEP 2: Point your new URC-SR3 Remote
Control toward the component and press the
appropriately labeled Component button (TV
for TV, DVD for DVD, etc.) While holding this
button down, press the numeric assigned to
your brand in the Quick Set-up Code Table
(See Page 2) and release both Component
button and the number key to save the code.
The component light will blink two times to
confirm that the code has been stored.
STEP 3: Point the remote control at the
component.
STEP 4: Press the power button. If it turns
off, it is programmed for your component. If
it does not turn off, use the Pre-Programmed
3-Digit code Method or Scanning Method.
Check your work before you move to
the next component. Press the POWER
[ON] button to turn the component back on.
Next, test the VOLUME and CHANNEL
buttons (or PLAY and STOP buttons for DVD).
Repeat Steps 1-3 to activate up to three
components.
Didn’t work for one of your components?
See other set-up options on page 8.
Page | 1
Quick Number Manufacturer/Brand
0LG
1 SCIENTIFIC ATLANTA
2 MOTOROLA
3 DIRECTV
4 ECHOSTAR
5MOXI
6 CABLEVISION
7 SAMSUNG
8GE
9 JERROLD
Quick Number Manufacturer/Brand
0 SANYO
1 SONY
2 SAMSUNG
3LG
4 TOSHIBA
5 PANASONIC
6 PHILIPS
7 HITACHI
8 SHARP
9 VIZIO
Quick Number Manufacturer/Brand
0 HITACHI
1 SONY
2 PHILIPS
3 SAMSUNG
4 PHILIPS MAGNAVOX
5 PANASONIC
6LG
7 JVC
8 DENON
9 PIONEER
CBL/SAT
TV
DVD
Quick Set-up Code Tables
Page | 2
Page | 3
Keypad Layout and
Button Functions
Allows you to turn the
selected component on
and off.
POWER
Designed to send Power
On/Off commands for up to
three components with one
button press.
ALL OFF
Used to select the
component you want
to operate and signals
remote control activity.
Displays the
Applications Menu
through the Cable
Set Top Box.
COMPONENTS
Exits from current
screen through the
Cable Set Top Box.
Use to enter code
numbers for
programming
components and to
enter channel
numbers to tune in
channels. Also used to
make numeric entries
on on-screen menus.
Perform standard
DVD and DVR
functions when in
DVD and DVR mode,
or VOD (Video-On-
Demand) and DVR
(Digital Video
Recorder) functions
when in Cable mode.
Custom-
programmable
Button
MENU
Displays the
Program Guide
listings through
the Cable Set
Top Box.
Displays
information about
the program
currently playing
or highlighted in
the Program
Guide through the
Cable Set Top Box.
INFO
GUIDE
Used for
programming
steps and on-
screen navigation
and highlighting.
CURSOR
NAVIGATION
PAD
EXIT
Selects highlighted
screen options.
SELECT
Selects the video
source from
available
components.
INPUT
Returns to the
previously tuned
channel through
the Cable Set
Top Box.
LAST
Silences the Sound.
Press to activate.
Press again to
restore sound to
the previous level.
MUTE
NUMBER PAD
TRANSPORT
CONTROLS
MY BUTTON
VOLUME
Raises or lowers
the sound volume.
Custom-
programmable
Favorite Channel
Buttons
MY FAVORITES
Table of Contents
Quick Set-up .............................1
Keypad Layout & Button
Functions ...................................3
Getting Started – Overview
• Battery Installation ........................6
• Activation Overview......................6
• Using Component Buttons ..............7
• Learning Capability.......................7
• Low Battery Warning ....................7
• Couch Mode ................................7
Get Started with the basics ...........8
• Quick Set-Up................................9
• Three-Digit Set-up..................10-11
• Auto-Search Set-up................12-13
• Set-up Using the
Learning Method ...................14-16
Activating Optional Advanced
Features.............................18-19
• MacroPower™ Total System
On/Off......................................20
• “My BUTTON”............................21
• “My favorites” buttons.................22
Activating Punch Throughs
.........
23
• SimpleSound™ Total System
Volume Control...........................24
• Channel Control
Punch Through ...........................25
• Transport Control
Punch Through ...........................26
• OSD (On-Screen Display)
Control Punch Through ..............27
Page | 4
Page | 5
Erasing Commands - Overview....28
• Erasing a Single Learned
Command ..................................28
• Erasing All Learned Commands
from One Component .................29
• Erasing MacroPower & Other
Macro Commands......................30
• Erasing SimpleSound & Other
“Punch Through” Commands.......31
• Factory Reset..............................32
Finding a Component’s Set-Up
Code Number...........................33
Pre-Programmed Code Tables ..34
• CABLE/SAT...............................35
• TV .......................................36-37
• DVD/DVR.................................38
FAQs........................................39
Warranty .................................40
Specifications ..........................42
Information to the user ..........43
COMPONENT
BUTTONS
NUMBER
PAD
Getting Started - Overview
Battery Installation
Press the tab and remove the cover of the battery
compartment located in the back of your remote.
Insert the two AAA batteries (included in the package)
making sure to match the positive (+) and negative (-)
symbols as shown in the diagram. Place the cover
back over the battery compartment.
Activation overview control up
to three components
The URC-SR3 remote control is designed to
control up to three different TV/DVD
components and operate virtually all brands
of TV, DVD/DVR, and CABLE/SAT components.
Component Buttons
Be sure to match your component to the
proper Component button on the top of the
remote.
INSERT BATTERIES
CORRECTLY
Page | 6
Page | 7
Using Component Buttons
Once you have activated the remote for all
three of your components, you can simply
press a Component button at the top of the
remote, and the buttons on the remote will
work with that component.
Each time you press a button on the remote,
the Component button light will turn on,
indicating which component you are
controlling.
Learning Capability
The URC-SR3 has the ability to learn
functions from the original remote controls
of other manufacturers, even if they are not
in our pre-programmed database. See
page 14 for instructions.
Low Battery Warning
When the batteries are low and need to be
replaced, the component light will quickly
blink two times when you press the POWER
[ON] button.
Couch Mode
We’re watching out for your batteries. Your
URC-SR3 remote is designed to automatically
turn itself off if a button is pressed for more
than 30 seconds. This prevents battery power
from being depleted if the remote accidentally
slips between the couch cushions.
We love to help!
PLEASE CONTACT OUR TECHNICAL
SUPPORT CENTER.
E-MAIL: [email protected]
Phone: 1-800-901-0800 (9:00AM - 6:00PM
EST Monday - Friday)
PLEASE DO NOT RETURN
THIS PRODUCT TO THE STORE
Three ways to get started
There are three ways you can activate your
new URC-SR3 universal remote control using
its pre-programmed codes.
1. Quick Set-Up (page 9)
2. Three-Digit Code Set-up (page 10)
3. Auto—Search Set-up (page 12)
Page | 8
Page | 9
1. Quick Set-up
Set-up one component at a time, and you’ll
move quickly through your system.
Step 1:
Turn on the component you want to
activate. (Other components can be on or
off, it doesn’t matter.)
Step 2:
Point your new URC-SR3 Remote
Control toward the component and press the
appropriately labeled Component button (TV
for TV, DVD for DVD, etc.) While holding this
button down, press the numeric assigned to
your brand in the Quick Set-up Code Table
(See Page 2) and release both Component
button and the number key to save the code.
The component light will blink two times to
confirm that the code has been stored.
Step 3:
Point the remote control at the
component.
Step 4:
Press the power button. If it turns
off, it is programmed for your component. If
it does not turn off, use the Pre-Programmed
3-Digit code Method or Scanning Method.
Check your work. Press the POWER [ON]
button to turn the component back on.
Next, test the VOLUME and CHANNEL buttons
(or PLAY and STOP buttons for DVD) to make
sure they all work. Repeat steps one through
three until all your components are set up prop-
erly.
COMPONENT
BUTTONS
NUMBER
PAD
Other manuals for URC-SR3
1
Table of contents
Other Universal Remote Control Remote Control manuals
Universal Remote Control
Universal Remote Control URC-A6 User manual
Universal Remote Control
Universal Remote Control UR3-SR User manual
Universal Remote Control
Universal Remote Control CLIKR-5 UR5U-8780L User manual
Universal Remote Control
Universal Remote Control Complete Control KP-900 User manual
Universal Remote Control
Universal Remote Control CLIKR-5 UR5U-8500 User manual
Universal Remote Control
Universal Remote Control ONE FOR ALL 9800CMN User manual
Universal Remote Control
Universal Remote Control CLIKR-5 UR5U-8500 User manual
Universal Remote Control
Universal Remote Control MX-6000 - User manual
Universal Remote Control
Universal Remote Control UR5U-8520L User manual
Universal Remote Control
Universal Remote Control UR4U-MDVR2 User manual
Universal Remote Control
Universal Remote Control Aurora MX-950 Owner's manual
Universal Remote Control
Universal Remote Control UR-P95TVE User manual
Universal Remote Control
Universal Remote Control PHAZR-5 User manual
Universal Remote Control
Universal Remote Control UR4-EXP User manual
Universal Remote Control
Universal Remote Control URC-A6 User manual
Universal Remote Control
Universal Remote Control LIGHTING User manual
Universal Remote Control
Universal Remote Control ONE FOR ALL 8800CMN User manual
Universal Remote Control
Universal Remote Control CLIKR-5 UR5U-8500 User manual
Universal Remote Control
Universal Remote Control Easy Clicker UR3-SR3 User manual
Universal Remote Control
Universal Remote Control CLIKR-5 UR5U-8500 User manual
