Universal Remote Control osiris User manual
Owner’s
Manual
osiris
FAV
HBO
SHOW
MOVIE
ESPN
CNN
1 0F 8
MX350 Manual.qxd 8/13/2004 10:03 AM Page 1
Osiris Owner’s Manual © 2004 Universal Remote Control, Inc.
The information in this manual is copyright protected. No part of this manual may be copied or reproduced
in any form without prior written consent from Universal Remote Control, Inc. UNIVERSAL REMOTE CON-
TROL, INC. SHALL NOT BE LIABLE FOR OPERATIONAL, TECHNICAL OR EDITORIAL ERRORS/OMIS-
SIONS MADE IN THIS MANUAL. The information in this manual may be subject to change without prior
notice. Osiris is a registered trademark of Universal Remote Control, Inc. Power of Simple is a trademark of
Universal Remote Control, Inc. All other brand or product names are trademarks or registered trademarks of
their respective companies or organizations.
500 Mamaroneck Avenue, Harrison, NY 10528
Phone: (914) 835-4484 Fax: (914) 835-4532
Thank You!
Thank you for purchasing the Osiris Pre-Programmed and
Learning Remote Control. This manual is designed to assist you
step-by-step as you setup the Osiris to replace all of your
remote controls and automate your home entertainment system.
TM
MX350 Manual.qxd 8/13/2004 10:03 AM Page 2
Table of Contents
Getting Started 2
Button Layout 3
Basic Setup 5
Pre-Programmed Method 5
Learning Method 9
Volume Control Punch Through 12
Advanced Operation 14
Advanced Setup 16
Editing Button Labels 16
Macro Button Setup 19
Favorite Channel Setup 21
Hiding and Adding Pages 23
Erasing 25
Cloning One Osiris to Another 26
Recalling Pre-Programmed Settings 27
Utilizing Optional RF Base Stations 28
IR/RF Signal Setting 31
ID # - Setting Base Station Address 33
EMITT - Setting IR Emitter Outputs 34
BLAST - Setting the Front Panel Blaster On or Off 35
Pre-Programmed Code Tables 37
Frequently Asked Questions 52
Warranty 53
Specifications 53
MX350 Manual.qxd 8/13/2004 10:03 AM Page 1
Getting Started
Congratulations!
You’ve purchased one of the most advanced and easy to setup control sys-
tems available. The Osiris’s built-in library includes thousands of different
brands and models of remote controls. In most systems, all you have to do
to setup the Osiris is enter which brands and models you own. If you own
a component too new to be in the library, the Osiris uses advanced learn-
ing technology to quickly set each Osiris button, one at at time. Setting up
your Osiris to replace all your existing remote controls can be done in a
few minutes. Basic Setup is described on pages 5 to 14.
The Osiris’s exciting advanced features automate and customize operation
in many ways. You could use Macro Setup to power on all of your compo-
nents and start the show with the press of one button! With the Osiris’s
unique Favorite Channel capability, you can tune in a channel with the
press of one button instead of entering the entire channel number. Any of
the button names on the display can be edited as you like. It is best to
delay any Advanced Setup (described on pages 15 to 29) until after you
finish Basic Setup.
Battery Installation
Remove the battery compartment cover by pressing up the cover lock.
Insert four AAA batteries into the battery compartment as shown in the
diagram.
2
The Osiris
+
+
+
+
-
--
-
MX350 Manual.qxd 8/13/2004 10:03 AM Page 2
MAIN
Button
takes you
to the
MAIN
Menu.
Screen
Labeled
Display
Buttons
LIGHT
Button
PAGE
Numbers
FUNCTION
Buttons
TITLE
FAVORITE
CHANNEL
Button
PAGE
Buttons
change the
page of
Display
Buttons.
Button Layout
3
MX-350
MAIN
TV
CABLE
DVD
VCR
AUDIO
1 0F 2
MX350 Manual.qxd 8/13/2004 10:03 AM Page 3
4
The Osiris
Selecting a New DEVICE Changes
All Button Commands Instantly
The Osiris can operate ten different devices even though it is only one
remote control. Let’s try it now! Press the MAIN button, then press the TV
DEVICE button.
The top of the screen changes from MAIN to TV. Now all of the buttons
change their function to operate a TV. Press the page buttons. Watch the
labels of the display buttons change with each press. There are five pages
of display buttons already labeled for TV operation. To operate another of
your components (e.g., VCR, DVD etc.), press the MAIN button to return
to the MAIN menu. The MAIN menu displays five of your Devices on the
screen. Simply press one of the screen-labeled Device buttons to operate
another device. If you don’t see the device name you want, then use the
PAGE buttons to display the remaining five devices on page 2 of the
MAIN menu.
Light Button
Press the LIGHT button to backlight all the buttons. To turn off the back-
lighting, press the LIGHT button again, or just wait ten seconds (the back-
lighting automatically shuts itself off).
TV
DEVICE
Button
MAIN
Button
MAIN
TV
CABLE
DVD
VCR
AUDIO
1 0F 2
MAIN
TV
CABLE
DVD
VCR
AUDIO
1 0F 2
LIGHT
Button
MX350 Manual.qxd 8/13/2004 10:03 AM Page 4
Basic Setup
You can start setting up your Osiris using either the Pre-Programmed
Method or the Learning Method. However, all the buttons of the Osiris are
setup at once with the Pre-Programmed Method, so it is usually faster than
the one-button-at-a-time Learning Method.
Pre-Programmed Method
Power on the A/V component you wish to setup, so that you can test
codes by sending power off commands.
Refer to the pre-programmed code tables on pages 33 - 47 and
write down the code numbers listed for your A/V component. The
code numbers are listed by categories of devices, then by brand.
See page 33 for a category list.
Press and hold both the MAIN and ENT (Enter) buttons for approxi-
mately three seconds. The top of the display will show “SETUP”.
You are in SETUP mode now.
Note: You have 30 seconds to perform a step while you are in SETUP mode. If
you don’t press a button within that time, the Osiris will time out and return to
normal operation.
MAIN
Button ENT
Button
1
2
3
5
MX-350
MX350 Manual.qxd 8/13/2004 10:03 AM Page 5
Press the P-PRO button to select the Pre-Programmed Method.
The display changes so that you can select which Device button to
setup.
In this step you choose the name of the device you’d like to setup.
Use the cursor UP or DOWN buttons to change the flashing name.
When it is correct, press the SELECT button.
For Example: I wanted to setup the TV Device button first, so I pressed the
cursor UP or DOWN until “TV” was flashing in the display.
The bottom of the display will flash “FROM TABLE”.
P-PRO
Button
6
The Osiris
4
5
UP
SELECT
DOWN
SETUP
P-PRO
LEARN
EDIT
MACRO
FAV
1 0F 2
P-PRO
TV
CABLE
DVD
VCR
AUDIO
PRESS
Press a Page button to display the
other five Device names.
First
Five
Device
Names
MX350 Manual.qxd 8/13/2004 10:03 AM Page 6
In this step you verify the type of component you plan to operate
with this device button. If the flashing name is correct, press
SELECT.
If the name flashing in the display is incorrect (for example, you are setting up
AUX to operate a Laser Disc Player), use the UP and DOWN buttons to
change the flashing name to the correct type of component.
Note: Each name that appears in the display may include several types of
components. For example, the DVD category includes DVD players and
Laser Disc Players. See page 33 for a list of component types each Code
Table contains.
Point the Osiris at the component, then enter the first three digit
code number from your notes using the numbered buttons. After
you enter each three digit number, look at the component to see if
it turned off.
Continue to enter code numbers until the
component powers off.
For Example: I have a Sony TV. I found the code
numbers 070, 139,147, 126, 185, 194 and 085 under Sony in the TV
TABLE. Using the numbered buttons on the Osiris, I entered 070 and
looked at the TV. It
didn’t turn off, so I entered 139, then 147 and so on, until I found the code
that powered off the TV.
6
7
SELECT
Use the
number
buttons to
enter the
code
number.
7
MX-350
MX350 Manual.qxd 8/13/2004 10:03 AM Page 7
Note: If a component fails to turn off after you have entered all of the code
numbers listed for your brand, you can scan through the other brands in the
table using the UP and Down buttons, then tapping either the Power On or
Power Off buttons to see if the component powers off (there is a chance that
your component was actually manufactured by another brand). However,
most of the code tables are so large it is usually faster to use the Learning
Method on Page 10.
When the component turns off, save the code number you entered
by pressing the SAVE button that appears on the screen.
Exit SETUP mode by pressing the MAIN button two times. When
the display shows “MAIN”, you are back in normal operating
mode.
SAVE
Button
Code
Number
You
Entered
MAIN
Button
8
The Osiris
8
9
Scan Up to the next Code
Number
Scan Down to the previous
Code Number
Press Power On or Power
Off to test if the device
powers off.
TV
089
UP
DOWN
SAVE
EXIT
PRESS
TV
089
UP
DOWN
SAVE
EXIT
PRESS
SETUP
P-PRO
LEARN
EDIT
MACRO
FAV
1 0F 2
MX350 Manual.qxd 8/13/2004 10:03 AM Page 8
Table of contents
Other Universal Remote Control Remote Control manuals
Universal Remote Control
Universal Remote Control Complete Control MX-780i User manual
Universal Remote Control
Universal Remote Control UR3-EXP User manual
Universal Remote Control
Universal Remote Control UR3-SR3-DTA User manual
Universal Remote Control
Universal Remote Control MX-6000 - User manual
Universal Remote Control
Universal Remote Control Easy Clicker UR3L-SR4 User manual
Universal Remote Control
Universal Remote Control TOTAL CONTROL FX-1 User manual
Universal Remote Control
Universal Remote Control PHAZR-5 User manual
Universal Remote Control
Universal Remote Control UR-J2000TVE User manual
Universal Remote Control
Universal Remote Control URC-A6 User manual
Universal Remote Control
Universal Remote Control UR4-P360SI User manual
Universal Remote Control
Universal Remote Control Easy Clicker UR2-211 User manual
Universal Remote Control
Universal Remote Control UR2-DTA User manual
Universal Remote Control
Universal Remote Control UR4-DSR - MOTOROLA DSR400 User manual
Universal Remote Control
Universal Remote Control URC-SR3 User manual
Universal Remote Control
Universal Remote Control Easy Clicker UR3L-SR4 User manual
Universal Remote Control
Universal Remote Control UR4U-MDVR2 User manual
Universal Remote Control
Universal Remote Control Complete Control KP-900 User manual
Universal Remote Control
Universal Remote Control MX-800 User manual
Universal Remote Control
Universal Remote Control UR4-DCT User manual
Universal Remote Control
Universal Remote Control UR5L-9000L-IP User manual
