UNITED DVBT9070 User manual
User Manual
High DefinitionDigital SetTopBox
Please read thisUser Manual carefullyto ensure properuse of thisproduct and keepthis manual
for future reference.
DVBT9070
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do notuse this apparatusnear water.
6) Clean onlywith dry cloth.
7) Do notblock any ventilationopenings, install inaccordance with the
instructions.
8) Do not installnear any heat sourcessuch as radiations, heatregisters,
stoves, or other apparatus(including amplifiers) that produceheat.
9) Do notdefeat the safetypurpose of thepolarized plug. Ifthe provided
plug does notfit into youroutlet, consult anelectrician for replacement
of the obsolete outlet.
10) Protected thepower cord frombeing walked onor pinched particularly
at plugs, conveniencereceptacles, and thepoint where theyexit from
the apparatus.
11) Onlyuse attachments/accessories specifiedby the manufacturer.
12) Unplug thisapparatus during lightingstorms or whenunused for long
periods of time.
13) Refer allservicing to qualifiedservice personnel. Servicingis required
when the apparatushas been damaged inany way,such as power-
supply cord orplug is damaged, liquidhas been spilled orobjects have
fallen into theapparatus, the apparatushas been exposedto rain or
moisture, does notoperate normally,or has beendropped.
14) Mains plug isused as the disconnectdevice, the disconnect device
shall remain readilyoperable.
15) The ventilationshould not beimpeded by coveringthe ventilation
openings with items, suchas newspapers, table-cloth, curtains,etc.
16) No nakedflame sources, suchas lighted candles,should be placedon
the apparatus.
17) Attention shouldbe drawn to the environmental aspects ofbattery
disposal.
18) The useof apparatus inmoderate climate.
WARNING: To reduce the riskof fire orelectric shock, donot expose
this apparatus torain or moisture.
WARNING: Thebatteries shall not beexposed to excessive heatsuch
as sunshine, fireor the like.
Important Safety Instructions
The symbol indicates that there are important operating and
maintenance instructions in the literature accompanying this unit.
The symbol indicates that dangerous voltages constituting a risk of
electric shock are present within this unit.
CAUTION:
When the apparatuswas in electrostaticcircumstance, it maybe
malfunction and needto reset byuser.
Tableof Contents
1
1. Front panel
2. Rear panel
Front and Rear Panel
1 RF IN : This socket connects to your external aerial.
2 RF LOOPTHROUGH: This socket willbypass the RFsignal to either
your TV oranother video system.
3 COAXIAL: This socket connectsto a coaxialsocket on yoursurround
sound system.
4 TV SCART: This socket connectsto your TV.
5 VCR SCART: This socket connectsto either a DVDor other video system.
6 HDMI OUT This socket connectsto HDMI indevice.
7MAINS CABLE: This is usedto connect toyour main powersupply.
Front and Rear Panel........................................................................... 1
Remote Control.... ............................................................................... 2
Connections.........................................................................................3
First Time Installation...........................................................................3
Troubleshooting...................................................................................7
Technical Specifications.......................................................................8 1 POWER BUTTON: Used to turn on/off the main power supply.
2 REMOTE CONTROL SENSOR: Used to receive the signal from the
remote control.
3
4STANDBY INDICATOR: Used to visually show power state of the
set top box, the LED will turn red if the set top box enter standby mode.
5 USB:
6 CHANNEL UP/DOWN: Used to change channels without using the
remote control.
LED DISPLAY WINDOW: Used to display channel number.
Data input from USB storage devices.
3456
2
Installing the Batteries
Remove the battery cover from the and put 2xAAA size
batteries inside the compartment.
The diagram inside the Battery Compartment shows thecorrect way to
install the batteries.
Remote Control
OPEN
CLOSE
1.Open thecover 2.Install batteries 3.Close thecover
Using theRemote Control
Touse theRemote Control, point it towards the frontof theDigital Set Top Box.
The Remote Controlhas arange ofup to7 metresfrom theSet Top Boxat an
angle ofup to60 degrees.
The Remote Controlwill notoperate ifits pathis blocked.
Sunlight or very bright light will decrease the sensitivity of the
Remote Control.
Remote Control
1. MUTE: Mute or Restore Audio Output.
2. INFO: Displays additional channel information.
3. TTX: DisplaysTeletext Information.
4. DTV/VCR: Switches the product to VCR input
if it is in DTV state. Switches the product to
DTV if it is in VCR state.
5. SUBTITLE: Selects Subtitles Language.
6. EXIT: Exits the current Menu or returns to the
previous Menu.
7. OK: Confirms an entry or selection. Displays
the list of channels.
8. RIGHT / LEFT: Navigates through the Menus.
Increases or decreases volume.
9. TV/RADIO: Switches from TV function to Radio
function and from Radio to TV.
10. RECALL:
11. GOTO: Selects the play time of media.
12. PREV: Skips to the previous track during.
playing media and skips to the previous channel
during playing DTV.
13. NEXT: Skips to the next track during playing
media and skips to the next channel during playing
DTV.
14. REPEAT: Selects Repeat or turn off Repeat
mode.
15. STOP: Stops media play.
16. STANDBY:
17. EPG: (Electronic Program Guide)T urns the
program guide on.
18. AUDIO: Selects an Audio Language or Audio Mode.
19. UP / DOWN: Navigates through the Menus. Selects the next or previous
Channel.
20. MENU: Turns on Main Menu.
21. FAVOURITE: Turns on Favourite Menu
22. 0-9 (Numeric Buttons): Selects a channel or setting.
23. FWD: Searches forwards during media play.
24. REV: Searches backwards during media play.
25. PLAY: Starts or resumes media play.
26. PAUSE: Pauses media play.
27. COLOUR BUTTONS:
Used to switch between the last
two viewed channels.
Switch the product to on or standby.
Operate different function in TEXTscreen.
Table of contents
