Unitech RG630 User manual

Package

Please make sure the following contents are in the

gun grip gift box. If something is missing or damaged,

please contact your unitech representative.

RG630 UHF RFID gun grip

Wrist Strap

RFID Tags

Quick Start Guide

Quick Start Guide

V1.1

RG630 UHF RFID Gun Grip

How to download RFID Reader App on EA630

Before starting to use UHF RFID gun grip, please go to the website :

https://www.ute.com/en/products/detail/RG630

Go to download section and click “RG630 SDK and programming

manual” RFID Reader.apk is in the compressed folder.

Note :

￭The gun grip is applicable to the terminal with or without the

bumpers on. (Selected by gun grip P/N)

￭ Please make sure EA630 OS version requires MR2 or higher.

￭

To work UHF RFID gun grip properly, please make sure the

battery of EA630 should be 10% or more.

How to use RFID Reader App on EA630

1). Connect EA630 with the UHF RFID gun grip.

Turn on EA630 and tap on the App “RFID Reader”.

2). Region: Please choose the region based on the country.

And then tap Connect to start.

Tag Operation Setting

Baudrate

3). Choose Tap operation to switch the other read

mode. There are: READ, WRITE, LOCK, KILL and

LOCATE.

When the locate mode is on:

Step 1: Key in the EPC code of the

tag you want to find.

Step 2: Press the “START” key.

Step 3: Find the tag according to the

signal strength of the signal

bar.

￭Rapid Read

Read as many tags as quick as possible

(Parameters cannot be adjusted)

￭Custom

Allow users to save their own setting

parameters

￭Default : Cycle Count

(Reading up to 6 meters away)

Read as many unique tags as possible

(Parameters cannot be adjusted)

How to switch to barcode scan

Click the box to enable barcode scanner.

Caution :

Pogo pins may heat up after operating for long

eriods of time.

Scan Result :

￭RFIDScan ￭Barcode Scan

CAUTION!



To ensure the unit working properly, please keep all connectors

away from the contaminants staying inside of them such as dust,

grease, mud, and water. The negligence may cause the unit with

no communication, short circuited, overheated and so on.



If the connector is damaged, please ensure the connector is being

fully repaired before using the unit to avoid causing short circuited.

http://www.ute.com/

Other Unitech Barcode Reader manuals

Unitech

Unitech MS912 Operating instructions

Unitech

Unitech MS840 User manual

Unitech

Unitech MS842P User manual

Unitech

Unitech MS912BT User manual

Unitech

Unitech MS838B User manual

Unitech

Unitech MS912+ User manual

Unitech

Unitech MS925 User manual

Unitech

Unitech MS852B Plus User manual

Unitech

Unitech ShuttleC Instruction sheet

Unitech

Unitech HT660 Wireless edition Installation and operation manual

Unitech

Unitech MS350 User manual

Unitech

Unitech MS100 User manual

Unitech

Unitech Hand Held Scanner User manual

Unitech

Unitech MS84XG User manual

Unitech

Unitech MS926P User manual

Unitech

Unitech MS836 User manual

Unitech

Unitech MS842RB User manual

Unitech

Unitech MS842 User manual

Unitech

Unitech MS146 User manual

Unitech

Unitech MS852B User manual

Unitech

Unitech MS100 User manual

Unitech

Unitech MS852B Plus User manual

Unitech

Unitech MS926P User manual

Unitech

Unitech MS926 User manual

Unitech RG630 User manual

Popular Barcode Reader manuals by other brands