Unitech MS910 User manual

Unitech electronics co., ltd.

5F., No.135, Ln. 235, Baoqiao Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.)



Tel: + 886 2 89121122



Fax: +886 2 89121810



website: www.ute.com

Wireless Scanner

- MS910 -

User’s Manual

Version 1.3

Unitech electronics co., ltd.

5F., No.135, Ln. 235, Baoqiao Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.)



Tel: + 886 2 89121122



Fax: +886 2 89121810



website: www.ute.com

Chapter 2

Installation and Connection

Connecting (Pairing) the Scanner to a Host PC

Please make sure your PC or Smartphone has a built-in wireless adaptor; the MS910 supports

both HID and SPP wireless profiles. If you are connecting it to an iOS (Apple) smartphone,

please follow the instruction of “Connecting via Human Interface Device (HID) Mode”; if you are

connecting it to an Android smartphone, please follow the instruction of “Connecting via Serial

Port Profile (SPP) Mode” or the instruction of “Human Interface Device (HID) Mode”.

Note: Android 2.x devices can work with MS910 in the SPP mode ONLY. The SPP mode

or/and the HID mode are not definitely compatible with each version of Android OS, and thus

depends on the Android-based hardware specifications defined by the Android device

manufacturers.

Connecting via Serial Port Profile (SPP) Mode

1. Turn on the wireless device on your host (PC, Smartphone, or Tablet).

2. Press the scanner trigger for 1 second to activate the scanner.

3. Scan [Disconnect] barcode.

Disconnect

SPP

4. Scan the [SPP] barcode below:

5. The scanner will emit several beeps.

6. Conduct a search for the MS910 on your host. Select “Wireless Scanner” from discovered

device list and the scanner will beep twice.

7. Enter pincode, which is “1234” by default.

8. Open serial communication software with a COM port (see Device Manager) properly set

up.

9. The scanner will beep twice and the indicator LED will turn off to verify the successful

connection.

Unitech electronics co., ltd.

5F., No.135, Ln. 235, Baoqiao Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.)



Tel: + 886 2 89121122



Fax: +886 2 89121810



website: www.ute.com

Connecting via Human Interface Device (HID) Mode

1. Turn on the wireless device on your host (PC, Smartphone, or Tablet).

2. Press the scanner trigger for 1 second to activate the scanner.

3. Scan the [Disconnect] barcode.

Disconnect

4. Press the trigger for 1 second to activate the scanner.

5. Scan the [HID] barcode below:

HID

6. The scanner will emit several short beeps and then stop beeping. The green LED light will

flash continually during the pairing process.

7. On your host device, in the settings section where you can see Bluetooth settings and

manage your connections.

a. You will see the MS910 listed as [Wireless Scanner] under Bluetooth devices.

b. You will see a message under that [Pair with this device].

Select this device on your host and begin to pair.

8. Your Host device will ask you to type in a pin code.

a. Use your host device keypad to enter this pin code.

b. The pin code can be any set of numbers.

c. We suggest using 4 numbers.

9. Once you have entered the pin code on the Host device, you need to set up the pin code

on the MS910 to match.

a. With the MS910, scan the Pincode Start barcode below.

Pincode Start

b. Refer to the barcode table below, and scan the same numbers that you used as the pin

code on your Host device. For example, if your pin code is “241657”,

scan [2] – [4] – [1] – [6] – [5] – [7] in sequential order:

Unitech electronics co., ltd.

5F., No.135, Ln. 235, Baoqiao Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.)



Tel: + 886 2 89121122



Fax: +886 2 89121810



website: www.ute.com

c. Scan the [Enter] barcode below:

Enter

d. Scan the [Pincode-Stop] barcode:

Pincode-Stop

10. On your Host device you will see the message under [Wireless Scanner] saying

[connecting...].

11. Once that message turns to [Paired and Connected], the scanner will beep twice to verify

a successful connection, and you are ready to start scanning bar code date into your Host

device.

a. To do a test, open up Word or Note Pad or even a new E-mail [anything that will allow

you to type in data].

b. Scan a number bar code from this manual.

c. That number should appear on your Host device in the application you opened.

d. If not, please scan [Disconnect] barcode below and repeat steps 1 to 9 above.

Note. To disconnect the scanner from the host or to switch the wireless profile from one to another, please scan

the [Disconnect] barcode:

Disconnect

After scanning the [Disconnect] barcode, the MS910 will emit 3 beeps.

Unitech electronics co., ltd.

5F., No.135, Ln. 235, Baoqiao Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.)



Tel: + 886 2 89121122



Fax: +886 2 89121810



website: www.ute.com

Code 39 / Full ASCII Code Group 4

Unitech electronics co., ltd.

5F., No.135, Ln. 235, Baoqiao Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.)



Tel: + 886 2 89121122



Fax: +886 2 89121810



website: www.ute.com

I 2 of 5 Group 5

I 2of5 (ITF)

Unitech electronics co., ltd.

5F., No.135, Ln. 235, Baoqiao Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.)



Tel: + 886 2 89121122



Fax: +886 2 89121810



website: www.ute.com

S 2 of 5 / Code 32 Group 6

S 2of5 / China Postal

Code (Toshiba Code)

Code 32

(Italian Pharmacy)

Unitech electronics co., ltd.

5F., No.135, Ln. 235, Baoqiao Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.)



Tel: + 886 2 89121122



Fax: +886 2 89121810



website: www.ute.com

EAN 128 Group 7

Telepen

Define the EAN 128

Fields Separtor

Scan a ASCII code in full

ASCII code chart to select a

new fields separator

UCC / EAN 128

Note: If EAN 128 be disabled,

the EAN 128 labels will be

decoded as Code 128

Unitech electronics co., ltd.

5F., No.135, Ln. 235, Baoqiao Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.)



Tel: + 886 2 89121122



Fax: +886 2 89121810



website: www.ute.com

Code 128/ Code 93 / MSI Code Group 8

Code 128

Code 93

MSI / Plessey Code

SETTING PROCEDURE

MIN / MAX LENGTH

STEP 1 - Scan: MIN LENGTH/ MAX LENGTH

STEP 2 - Scan: Two digits from Appendix.

STEP 3 - Scan: MIN LENGTH/ MAX LENGTH

Please note that when Min Length and / or Max Length

are enabled, the scanner will only read bar codes that

fall into those length parameters. Bar codes shorter or

longer than specified will not be read. The default

lengths for these are indicated in parentheses under the

Min and Max bar codes for each symbology.

Unitech electronics co., ltd.

5F., No.135, Ln. 235, Baoqiao Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.)



Tel: + 886 2 89121122



Fax: +886 2 89121810



website: www.ute.com

Code 11 / Codabar Group 9

Code 11

Codabar

Other manuals for MS910

Table of contents

Unitech MS910 User manual

Popular Barcode Reader manuals by other brands