Uniden DECT 2005 Series User manual
DECT 2005
Accessory handset for
DECT 2015 Series
DECT 2035 Series
1
Welcome
Congratulations on your purchase of the Uniden DECT2005
accessory handset and charging cradle. You can place this fully
featured cordless handset anywhere your home has AC power.
Note: Illustrations in this manual are used for explanation purposes.
Some illustrations may differ from the actual unit.
Important!
The DECT2005 accessory handset will not operate until it is
registered to a Uniden main base. This manual describes how
to set up your new handset; for more detailed instructions on
operating your new handset, please refer to the manual supplied
with your base.
Terminology Used in this Manual
Accessory
Handset
A handset that works with an expandable phone base.
Accessory handsets must be registered to a base.
Base The main part of the phone that connects to your phone
line, and lets you make and receive calls.
Charging
cradle
A cradle that charges an accessory handset. It connects to
power but not to a phone line.
Standby
The handset is not in use. No line has been activated.
(It doesn’t matter whether the handset is in the cradle.)
No dial tone is present.
Station Any registered handset or the base.
Talk A dial tone has been enabled, so you can dial and carry on
a conversation with an outside party.
2
Compatible Bases
This handset is compatible with Uniden’s 1.8 GHz DECT
Expandable phone system: the DECT2015 and DECT2035
series.
Installing the Accessory Handset
Checking the Package Contents
Make sure your package contains the following items. If any
items are missing or damaged, please contact your place of
purchase immediately.
•CordlessHandset •PrintedMaterial
•ChargingcradlewithACAdapter(model#AAD-600S(M):
Input 240V AC, 50Hz; Output 9V DC, 210 mA)
•RechargeableNi-CdBatteryPack(model#BT-904)
3
Installing the Battery
UseonlytheUnidenBT-904rechargeablebatterypacksupplied
with your cordless telephone.
Unpack the
handset, battery
pack and battery
cover.(If the battery
cover is on the
handset, press in
on the notch and
slide the cover off.)
Push the battery pack
connector in firmly. (You
should hear it click into
place.) Gently tug on the
battery wires to make sure
the connection is secure.
BLACK
RED
Line up the red and black
wires on the battery pack
connector with the sticker in
the handset’s battery
compartment.
Place the cover over the
battery compartment and
slide it up into place.
4
Charging the Accessory Handset
The handset is powered by a rechargeable battery pack that
automatically recharges when the handset is placed in the
charging cradle.
UseonlytheUnidenAAD-600S(M)ACadapterwiththecharging
cradle.
What if the charge LED
doesn’t light up?
Reseat the handset; make sure
the contacts on the bottom of
the handset are lined up with
the contacts in the cradle.
Check the AC adapter connection.
Make sure you are not using an outlet
that’s controlled by a wall switch.
Connect the AC adapter to a
standard 240V AC wall outlet.
Connect the AC
adapter to the DC IN
9V jack as shown.
(It may already be
connected.)
Place the handset in the
charging cradle with the
display facing forward.
Charge your handset at least 15 to 20 hours
before using your new handset for the first time.
Make sure that the charge
LED illuminates when the
handset is seated.
5
Registering the Handset
You must register the handset to the base before you can use it.
Only one handset can be registered at a time. (If an accessory
handset has ever been registered to a base, you must reset the
handset before you can register it to a new base.)
To register to a DECT2015 or DECT2035 base:
Placetheaccessoryhandsetinthebase.Whilethehandset
is registering, Handset RegisteringappearsintheLCD.When
Registration complete is displayed, the handset has been
registered to the base.
Extra Handset
Extra Handset
Main Base
Extra Handset
+
Main Base
Charge the handset
for 15-20 hours.
Place the extra handset
in the main base to
register.
1
2
3
4
Charging cradle
Charging cradle
What if the
display shows
Registration
failed?
Pick up the
handset from
the base and
try again.
6
Resetting the Handset
If you want to register the handset to a different base or replace
ahandsetwithanotherone,youmustrstcleartheregistration
information from the base and the handset.
Pressandhold1) END and # foratleastveseconds,untilthe
SYSTEM RESET menu appears.
Select the Deregister HS2)
submenu by pressing MENU/
SELECT.WhichHandset?
appears in the display.
Use3) or to select the
handsetIDtobede-registeredfromthelist,andthenpress
MENU/SELECT. Deregister HS appears.
Press4) to move the cursor to Yes, and then press
MENU/SELECT.Youwillhearaconrmationtone.
7
Resetting the Handset Without the Base
If the original base this handset was registered to is not
available for some reason (for example, it is lost or somehow
incapacitated), you can still reset the handset and use it with
another base.
Pressandhold1) END and #foratleastveseconds,untilthe
SYSTEM RESET menu appears.
Press2) to move the cursor to Base Unavailable and then
press MENU/SELECT.
Press3) to move the cursor to the base which you want
tode-registerfrom,andthenpressMENU/SELECT. Base
Unavailable appears.
Press4) to move the cursor to Yes, and then press
MENU/SELECT.Youhearaconrmationtone,andthe
handset deletes its own link to the base without trying to
contact the base.
Now you are ready to register the handset to the new base.
8
Using the Interface
Parts of the Handset
Twelve-key dial pad
key (down)
key
(caller ID/right)
MENU/SELECT key
/MUTE key
(messages/mute)
END key
#key
key (speaker)
Microphone
Charging contacts
/TONE key
key (up)
new message LED
Earpiece
Display (LCD)
CLEAR/INT'COM key
(clear/intercom)
key (phonebook/left)
REDIAL/PAUSE key
TALK/FLASH key
PREMIUM
DECT
9
Reading the Display
In standby
During a call
Handset ID and banner
Number of new
Caller ID calls received
Call duration
Time
The ringer off icon indicates that the ringer is
turned off.
The voice mail icon appears when you have
messages waiting in your voice mailbox.
The privacyiconappearswhenthePrivacy
Mode is turned on.
The speaker icon appears when the speaker
phone is in use.
The mute icon appears while the microphone
is muted.
The battery icon indicates the handset
battery status: full, medium, low, and empty.
This manual suits for next models
2
Table of contents
Other Uniden Telephone manuals
Uniden
Uniden XDECT SSE47 Series User manual
Uniden
Uniden EXP 4241 Series User manual
Uniden
Uniden DSS8955 User manual
Uniden
Uniden D3288 Service manual
Uniden
Uniden 410 User manual
Uniden
Uniden SS E15 Series User manual
Uniden
Uniden GXP 2000 User manual
Uniden
Uniden DSS7955+1 Series User manual
Uniden
Uniden EXA2245 User manual
Uniden
Uniden DS70 User manual
Uniden
Uniden DGMax DGA940 User manual
Uniden
Uniden EVOC2 User manual
Uniden
Uniden MC 724 User manual
Uniden
Uniden EXP7241 Series Service manual
Uniden
Uniden FP105 User manual
Uniden
Uniden 3775 User manual
Uniden
Uniden UCIS 3000 User manual
Uniden
Uniden D2997 User manual
Uniden
Uniden AT4801 User manual
Uniden
Uniden CEZAI 998 Series User manual
