ULTIMATE SPEED HG07154 Installation and operating instructions
IAN 384227_2107
HEAVY DUTY RATCHET
STRAP SET
Assembly and safety advice
SÆT MED
SKRALLEGJORDE TIL
TUNG LAST
Montage- og
sikkerhedsanvisninger
TENDEURS À CLIQUET
POUR CHARGES
LOURDES
Instructions de montage et
consignes de sécurité
ZWARE LAST-
RATELSPANBANDEN-SET
Montage- en veiligheidsinstructies
SCHWERLAST-
RATSCHENSPANNGURTE-
SET
Montage- und
Sicherheitshinweise
HEAVY DUTY RATCHET STRAP SET
GB/IE/NI Assembly and safety advice Page 5
DK Montage- og sikkerhedsanvisninger Side 19
FR/BE Instructions de montage et consignes de sécurité Page 33
NL/BE Montage- en veiligheidsinstructies Pagina 47
DE/AT/CH Montage- und Sicherheitshinweise Seite 61
HG07154
HG04646/HG04647 - Use
Mentioned in the manual content
On the fold-out page
HG04648 - Use
HG07155
HG04646/HG04647 - Use
Mentioned in the manual content
On the fold-out page
HG04648 - Use
I
HG04646/HG04647 - Use
Mentioned in the manual content
On the fold-out page
HG04648 - Use
II
HG04646/HG04647 - Use
Mentioned in the manual content
On the fold-out page
HG04648 - Use
5GB/IE/NI
Introduction .................................Page 6
Intended use ................................Page 6
Technical data ...............................Page 7
Safety instructions..........................Page 8
Safety instructions for lashing straps ................Page 8
Practical use and care information..................Page 10
Use............................................Page 13
Attaching the lashing strap........................Page 14
Releasing the lashing strap........................Page 15
Cleaning and care ..........................Page 16
Disposal......................................Page 16
Warranty ....................................Page 17
6 GB/IE/NI
HEAVY DUTY RATCHET STRAP SET
Introduction
We congratulate you on the purchase of your new product. You have
chosen a high quality product. Familiarise yourself with the product
before using it for the first time. In addition, please carefully refer to
the operating instructions and the safety advice below. Only use the
product as instructed and only for the indicated field of application.
Keep these instructions in a safe place. If you pass the product on to
anyone else, please ensure that you also pass on all the documentation
with it.
Intended use
The manufacturer and the dealer of this product are not liable for any
damages if the product is not used according to the warnings and
instructions of this instruction manual. The product is not intended for
commercial use. The product is only suitable for private use, to secure
loading on vehicles. Any usage which does not conform with this
manual can lead to injuries or damages.
7GB/IE/NI
Technical data
HG07154:
Length: LGF (length– fixed end): 0.2‒1.1m
LGL (length– adjustable end): 2‒50m
Permissible load (LC): 1000daN (10000N=
Newton/1000kg(m/s2)/ SHF 50daN)
Material: Polyester (PES)
HG07155:
Length: LGF (length– fixed end): 0.2‒1.1m
LGL (length– adjustable end): 2‒50m
Permissible load (LC): 350daN (3500N=
Newton/350kg(m/s2)/ HF25daN)
Material: Polyester (PES)
8 GB/IE/NI
Safety instructions
KEEP ALL THE SAFETY ADVICE AND INSTRUCTIONS IN A SAFE
PLACE FOR FUTURE REFERENCE!
Safety instructions for lashing straps
Keep the product away from children.
Check that all parts have been assembled correctly. Improper
assembly may result in injury.
Check the product for damages prior to each use. Do not use the
product anymore if it is damaged.
Carefully check the product for dirt, contamination, corrosion or
other material damages.
Do not use the product if it is damaged in any way:
– Broken threads or cuts in the thread (especially if the edges have
been nicked).
– Missing/illegible labelling. Only legibly marked and labelled
lashing straps may be used.
– Damage to connections. Deformation due to exposure to heat
(friction, radiation).
– Material deformations on any component
– Damages due to the effect of corrosive substances.
– After accidental contact with chemical products, the lashing strap
must be removed from service and the manufacturer or supplier
consulted.
Never exceed the permissible tensile load of the lashing strap as
stated on the label (see also “Technical data”).
9GB/IE/NI
Choose the most suitable lashing strap in accordance with the
intended load that needs to be lashed down, the tensile load and
loading surface (see label).
Check that the vehicle parts you wish to strap the load to are sturdy
enough.
Make sure that the lashing straps are not twisted/knotted and that
the load is distributed across their entire width.
Keep lashing strap away from hot surfaces.
Evenly distribute the lashing straps on the load to be secured.
Never use the lashing straps to lift loads.
m CAUTION! DANGER OF ACCIDENT! Always choose suitable
lashing straps, lashing points and lashing methods. The size, shape
and weight of the cargo as well as the intended mode of use, the
transport environment and the type of cargo determine the correct
choice.
Do not exceed the roof load indicated by the vehicle manufacturer.
m CAUTION! DANGER OF ACCIDENT! When lashing down, pay
attention to the required pre-load force. At least 2lashing straps
are required. For reasons of stability, at least 2lashing straps of the
same kind must be used for lashing down and 2pairs of lashing
straps of the same kind used for diagonal lashing.
m CAUTION! DANGER OF ACCIDENT! During transportation,
regularly check that the cargo is correctly lashed and tighten the
lashing strap if necessary.
10 GB/IE/NI
Practical use and care information
1. In selecting and using lashing equipment, you must consider the
required lashing force, the mode of use and the type of cargo to
be lashed. The size, shape and weight of the cargo as well as the
intended mode of use, the transport environment and the type of
cargo determine the correct choice. For stability reasons, at least
2lashing straps must be used for lashing down and 2pairs of
lashing straps used for diagonal lashing.
2. The selected web lashings shall both be strong enough and of the
correct length for the mode of use. Basic lashing rules:
– Plan the fitting and removal operations of lashing before starting
a journey;
– Keep in mind that during journeys parts of the load may have to
be unloaded;
– Calculate the number of web lashings according to
EN 12195-1:2010;
– Only those web lashings designed for frictional lashing with STF
on the label are to be used for frictional lashing;
– Check the tension force periodically, especially shortly after
starting the journey.
3. Due to different characteristics and because of different changes in
length under load, only identical lashing device combinations (e.g.
lashing chains and lashing strap made of synthetic fibres) may be
used in parallel for lashing the same load.
4. Consideration shall also be given to ancillary fittings (components)
and lashing devices in the load restraint assembly are compatible
with the web lashing.
5. During use, flat hooks must engage over the entire width of the
bearing surface of the hook.
This manual suits for next models
1
Table of contents
Languages:
Other ULTIMATE SPEED Power Tools manuals
