Ultimaker 2 Extended Operating and maintenance manual
FABLAB
FabLabBRUGERVEJLEDNING BASIC USER GUIDE
3D-PRINTER ULTIMAKER 2
Marts 2016 March 2016
12345Model 3D object
Export GCode to SD card
Start 3D-printing
Fjern den printede model og sluk for 3D-printeren
Set 3D-printer parameters in CURA
Modeller 3D gur
Indstil 3D-printerens parametre i CURA
Eksporter Gkode til SD kort
Påbegynd 3D-printning
Remove printed object and turn of 3D-printer
PROCESS FORLØB
PROCESS STEPS
3D-PRINTERULTIMAKER2
11. Skab en 3D-model med CAD-/3D modellerings software som f.eks.123d Design, Tinkercad,
Google Sketchup, Blender, OpenSCAD, FreeCAD, Rhino eller Inventor.
1. Create a 3D- model with a CAD-/3D modeling- software such as for example: 123d Design,
Tinkercad, Google Sketchup, Blender, OpenSCAD, FreeCAD, Rhino or Inventor.
2. “Gem/Eksporter” din 3D-model som .stl format.
2. “Save/Export” your 3D-model as a .stl format
Alternativ: Download en eksisterende model
fra en web platform som f.eks. YouMagine,
Thingiverse, Yeggi, Instructables etc.
Alternatively: Download an already existing model
from a web platform such as: YouMagine,
Thingiverse, Yeggi, Instructables etc.
Model 3D object
Modeller 3D gur
2Set 3D-printer parameters in CURA
Indstil 3D-printerens parametre i CURA
2. Vælg en af de følgende predenerede printindstillinger:
- Fast print
- Normal print
- High quality
- Ulti quality
2. Choose one of the following quality presets:
- Fast print
- Normal print
- High quality
- Ulti quality
3. Vælg “Print support structure” såfremt din model indeholder overødigt materiale
(see here for more information about udhæng).
3. Click on “Print support structure” if your model contains any overhang
(see here for more information about overhang).
1. Importer din .stl l til Cura.
1. Import your .stl le into Cura.
31. Tag SD kortet fra en Ultimaker og indsæt det i din computers SD kortlæser.
1. Insert the SD card from one of the Ultimakers into your computer’s SD cardreader.
Export GCode to SD card
Eksporter Gkode til SD kort
2. Klik på disk ikonet for at gemme din models GKode på SD kortet, eller gå til “File” og vælg
“Save GCode”. Vælg herefter SD kortet som drev destination.
2. Click on the disk icon to store the GCode of your model to the SD card OR go to "File" and
"Save GCode". Chose the SD card as your destination source.
3. Fjern herefter SD kortet fra din computers kortlæser.
3. Eject SD card from your computer’s cardreader.
4Start 3D-printing
Påbegynd 3D-printning
1. Tænd 3D-printeren.
1. Turn on the 3D-printer.
2. Tag en limstift. Påfør et tyndt lag lim på glaspladen på det sted, hvor din 3D-model skal
printes. Dette vil gøre det nemmere at fjerne din 3D-model fra pladen efter print.
2. Put a thin layer of glue from the glue stick onto the glass plate in the area where your 3D-object
will be printed. This will simplify the process of getting o your 3D-object from the glassplate.
3. Tag SD kortet ud af din computers kortlæser og indsæt det i en Ultimaker.
3. Take SD card out of your computer’s card reader and put it into the SD slot of one
of the Ultimakers.
4. Benyt “push” og “rotate” knappen på din Ultimaker for at navigere til “Print” og tryk der-
efter knappen til “enter”. Vælg din l og tryk på knappen for at påbegynde printprocessen.
4. Use the push and rotate button on the Ultimaker to navigate to “Print” and press Button to enter.
Then scroll to your le and press Button to start printing process.
5. Forlad ikke 3D-printeren før din 3D-model er færdigprintet. Hold øje med print processen,
så du kan nå at afbryde den, såfremt printet ikke bliver som ønsket.
5. Don’t just walk away and wait until the 3D-printer is done with your print. Have an eye on the
printing process once in a while in order to be able to intervene early enough if the print is not
turning out the way you wanted it to be.
5Fjern den printede model og sluk for 3D-printeren
Remove printed object and turn of 3D-printer
1. Vent 5 minutter med at fjerne din 3D-model fra printpladen, når den er færdigprintet,
så den kan nå at køle ned.
1. When the print is done wait for ca. 5 minutes before you take your printed 3D-object from the
printing plate in order for the printing plate to cool down.
Print teknologi Fused lament fabrication (FFF)
Bygge volumen 23 x 22,5 x 20,5 cm
Lag opløsning - 20 mikrometre (ultrahøj opløsning)
- 60 mikrometre (høj opløsning)
- 100 mikrometre (medium opløsning)
- 200 mikrometre (lav opløsning)
Glødetrådens diameter 2.85 mm
Dyse diameter 0.4 mm
Print hastighed 30 mm/1 - 300 mm/s
Rejse hastighed 30 mm/1 - 350 mm/s
Fil typer STL / OBJ / DAE / AMF
Support til netværksoperativsystem Windows (XP 32 bit / 7+), Ubuntu Linux (12.04+) & Mac OS X (10.6 64bit +)
Print technology Fused lament fabrication (FFF)
Build Volume 23 x 22,5 x 20,5 cm
Layer resolution - 20 micrometre (Ultra high resolution)
- 60 micrometre (High resolution)
- 100 micrometre (Medium resolution)
- 200 micrometre (Low resolution)
Filament diameter 2.85 mm
Nozzle diameter 0.4 mm
Print speed 30 mm/1 - 300 mm/s
Travel speed 30 mm/1 - 350 mm/s
File types STL / OBJ / DAE / AMF
Operating system support Windows (XP 32 bit / 7+), Ubuntu Linux (12.04+) & Mac OS X (10.6 64bit +)
Specikationer for Ultimaker 2
Specications for Ultimaker 2
Find ere informationer omkring Ultimaker 2 her: https://ultimaker.com/en/support/view/16554-user-manual
For more details about the Ultimaker 2 specs have a look here: https://ultimaker.com/en/support/view/16554-user-manual
BASIS SPECIFIKATIONER
BASIC SPECS
3D-PRINTERULTIMAKER2
Other manuals for 2 Extended
12
Table of contents
Other Ultimaker 3D Printer manuals
Ultimaker
Ultimaker Ultimaker S5 Pro Bundle User manual
Ultimaker
Ultimaker Heated Bed Upgrade Kit User manual
Ultimaker
Ultimaker S5 Material Station User manual
Ultimaker
Ultimaker S3 Installation guide
Ultimaker
Ultimaker EXTRUSION UPGRADE User manual
Ultimaker
Ultimaker 2 Extended User manual
Ultimaker
Ultimaker 2 Extended User manual
Ultimaker
Ultimaker 2 Extended User manual
Ultimaker
Ultimaker ORIGINAL+ User manual
Ultimaker
Ultimaker PVA Removal Station User manual
Ultimaker
Ultimaker 2 Extended User manual
Ultimaker
Ultimaker 2+ Connect Use and care manual
Ultimaker
Ultimaker 3 Extended User manual
Ultimaker
Ultimaker 2 Extended User manual
Ultimaker
Ultimaker S5 Material Station User manual
Ultimaker
Ultimaker METHOD XL User manual
Ultimaker
Ultimaker Original User manual
Ultimaker
Ultimaker 2 Extended User manual
Ultimaker
Ultimaker EXTRUSION UPGRADE User manual
Ultimaker
Ultimaker 3 Extended User manual
