Uberhaus 10625002 User manual

Modèle / Model: 10625002

OIL-FILLED RADIATOR

Operator’s Manual (p.2)

RADIATEUR À L'HUILE

Manuel de l’utilisateur (p.11)

TABLE OF CONTENTS________________ ____

SAFETY INSTRUCTIONS..................................................................

SAFETY SYMBOLS.............................................................................

UNPACKING........................................................................................

PARTS DESCRIPTION........................................................................

ASSEMBLY...........................................................................................

OPERATING INSTRUCTIONS..........................................................

SPECIFICATIONS...............................................................................

CLEANINGAND STORAGE………...................................................

WARRANTY.........................................................................................

TROUBLESHOOTING........................................................................

PARTS LIST.................................. ........... ...........................................

SCHEMATIC DRAWING....................................................................

IMPORTANT INSTRUCTIONSS

—

When using this appliance, basic precautions should always be followed to reduce

the risk of fire, electric shock and injury to persons, including the following:

CAUTION- High temperatures - keep electrical cords, drapery, and other furnishings at least 3 feet

(0.9m) from the front of the heater and away from the sides and rear.

1. Read all instructions before using the heater.

2. Remove the unit from its packaging and check to make sure it is in good condition before using.

3. Do not let children play with parts of the packing (such as plastic bags).

4. Check the household voltage to ensure it matches the heater’s rated specification.

5. Check the power cord and plug carefully before use to make sure that they are not damaged.

6. Before unplugging the power cord, be sure to turn off the power. When touching the unit,be

sure your hands are dry to prevent from receiving an electric shock.

7. Do not use near to, or point the heater towards furniture, curtains, or other inflammable objects.

Keep combustible materials, such as furniture pillows, bedding, papers, clothes, and curtains at

least 3 feet (0.9m) from the front of the heater and keep them away from the sides and rear.

8. Do not block air intakes or exhaust in any manner to prevent a possible fire.

9. Extreme caution is necessary when any heater in used by, or near children or invalids, and

whenever the heater is left operating and unattended.

10. Always unplug the heater when not in use.

11. Prevent water from getting into the housing of the heater during operation or in storage. Always

store in a dry area, free from potential moisture.

12. Do not use in places where gasoline, paint, or other inflammable liquids are used or stored.

IMPORTANT INSTRUCTIONSS

—

13. This heater is not intended for use in bathrooms, laundry areas, or similar indoor locations.

Never locate the heater where it may fall into a bath tub or other body of water.

14. Do not run the cord under carpeting. Do not cover the cord with throw rugs, runners, or the like.

Arrange the cord away from traffic areas and where it will not be tripped over.

15. Do not use on soft surfaces, like a bed, where openings may became blocked. Do not place the

heater near a bed because objects such as pillows or blankets can fall off the bed and be ignited by

the heater.

16. Do not operate any heater with a damaged cord, damaged plug, after the heater malfunctions, or

if it has been dropped or damaged in any manner. Return the heater to an authorized service facility

for examination, electrical or mechanical adjustment, or repair.

17. Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may

cause an electric shock or exhaust opening as this may causes an electric shock,fire, or damage

the heater.

18. This heater is hot when in use. To avoid burns, do not let bare skin touch the hot surfaces. If

provided, use handles when moving this heater.

19. Use this heater only as described in this manual. Any other uses not recommended by the

manufacturer may cause fire, electric shock, or personal injury and may void the warranty.

20. Avoid the use of an extension cord because the extension cord may overheat and cause a risk of

fire. However, if you must use an extension cord, it must be 14 AWG minimum size and rated at no

less than 1875 watts.

21. Do not use outdoors.

22. To disconnect heater, turn controls to off, then remove plug from outlet.

23. Never clean this heater while it is plugged in. Do not immerse it in water. To disconnect, turn

control to OFF, then remove the plug from the outlet by grasping it and pulling it from the outlet.

Never yank on the cord.

24. This appliance is not intended for use by persons (including children) with reduced physical,

sensory or mental capabilities, or lack of experience and knowledge, unless they have been given

supervision or instructions by a person responsible for their safety.

25. Children should be supervised to ensure that they do not play with the appliance.

26. The heater must not be located immediately below a socket-outlet.

27. This heater is filled with a precise quantity of special oil. Repairs requiring opening of the oil

container are only to be made by the manufacturer or his service agent, who should be contacted if

there is an oil leak.

28. When scrapping the heater, follow the regulations regarding oil disposal.

SAFETY SYMBOLS__________________________

UNPACKING__ _________________________

Check immediately whether all parts and accessories are present in the box. If anything is

missing or broken, contact our Customer Service at 1-866-206-0888.

PACKAGING INCLUDES:

--Caster brackets (X2)

--U-bolt (with right angle bend) (X2)

--Butterfly bolts (X4)

PARTS DESCRIPTION ...... ......... .......................

1. Oil fins (x7)

2. Carry handle

3. Thermostat control

4. Power & setting control

5. Power indicator

6. Power cord housing

7. Rolling casters

ASSEMBLY.......................................................

The heater is packaged with the feet unattached. You must attach them before operating

the heater.

CAUTION: Do not operate this heater without

casters attached.

WARNING: Do not operate without feet attached.

Do operate the heater only in upright position (feet

on the bottom, controls on the top), a

ny other

position could create a hazardous situation.

Assembly Instructions:

Unpack the heater and remove all parts from the packaging.

For ease of assembly, place the heater upside down or on its side on a soft surface which will

not scratch the unit. Use one hand to hold it in place.

• Place the bowlegged castor-mounting plate in the front and put straight castor-mounting plate in

the back.

1.Unscrew nut and washer and nut. (Fig B-1)

2.Attached casters with two metal plates with washer and nut (Fig B-2)

3.Place the bowlegged metal plate and wheel assembly between the last two fins at each end of the

heater as shown in Fig B-3,4,5.

4 .Attach the plate and wheel assemblies onto the heater with the U bolts and wiring nuts supplied as

shown in Fig B-3,4,5

5. Remove the wing nut from the U bolt and insert the U bolt through the holes in the plate and wheel

assembly as shown, reattach the wing nut and tighten firmly.(Fig B-6). Repeat this procedure on the

opposite side.

Location of the Heater:

1. Turn the heater upright. Ensure legs are correctly installed and level.

2. Place heater on a flat and stable surface. Setting the heater on an incline or decline may cause

damage to the unit and create a hazardous situation.

OPERATING INSTRUCTIONS____ _______........

1. Before using the heater make sure that it is on a flat and stable surface. Damage may occur

if it is placed on an incline or decline.

2. Set the power switch to 0 (OFF) position and the thermostat to .Then insert the plug

into a socket-outlet.

3. Rotate the thermostat knob clockwise to position and push the power switch of the

heater as follows: (I power－600 watts); (II power－900 watts); (I + II power－1500 watts); O for

power off.

4. When your room reaches the desired temperature, slowly rotate the thermostat knob

counter-clockwise until the pilot light goes out. The thermostat can now be left at this setting. As

soon as the room temperature has dropped below the set temperature, the unit will switch on

automatically, until the set temperature has been reached again. In this way the room

temperature remains constant with the highest energy efficiency.

5. If you want to change the room temperature setting, rotate the thermostat knob clockwise to

raise the temperature, or counter-clockwise to lower it.

6. This heater includes an overheat protection system that shuts off the heater when parts of

the heater are getting excessively hot.

7. To completely shut the heater off, turn all controls to O, and unplug the heater from the

socket-outlet.

SPECIFICATIONS______ _______________.

Model Number CYAA55-7

Power Supply 120 volts AC, 60Hz

Power Consumption 600 W (low heat setting)

900 W (medium heat setting)

1500 W (high heat setting)

CLEANING AND STORAGE_ _______........

Before any cleaning, make sure that the heater is turned off and plugged from the power source.

Regular Cleaning:

1. Prepare a mild detergent-water solution. Do not use cleaning liquid or other chemicals to spray

directly on the unit.

2. Use a clean, soft and lightly damp cloth to gently wipe off the dirt from the surface of the unit

only.

3. Do not attempt to open the heater to clean it. Doing so will damage the unit and void the

warranty.

NOTE: THE FINS ARE PERMANENTLY SEALED AND DO NOT REQUIRE ANY OIL CHANGE.

CAUTION: DO NOT ALLOW WATER TO RUN INTO THE INTERIOR OF THE HEATER AS THIS

COULD CREATEA FIRE OR ELECTRIC SHOCK HAZARD, DAMAGING THE UNIT.

STORAGE

1. Perform the cleaning procedures described above.

2. Wipe all parts to dry.

3. Pack the heater in a plastic bag and store it in a cool, dry place.

WARRANTY________________________ _.........

Thank you for investing in a UBERHAUS product. These products have been made

to quality standards and are guaranteed for domestic use against manufacturing

faults for a period of 12 months from the date of purchase.

This warranty does not affect your statutory rights. In case of any malfunction of your

product (failure, missing part, etc.), please contact one of our service technicians at

our toll free service line at1-866-206-0888 from 8 AM to 6 PM, Monday to Friday,

Eastern time. RONA reserves the right to replace the defective product, at its

discretion.

The product is guaranteed for 12 months if used for normal trade purposes. Any

guarantee is invalid if the product has been overloaded or subject to neglect,

improper use or an attempted repair other than by an authorized agent. Heavy-duty,

daily professional or hire usage are not guaranteed. Due to continuous product

improvement, we reserve the right to change the product specifications without prior

notice.

TROUBLESHOOTING...................................................

If your heater fails to operate, please follow these procedures before contacting Customer service:

Problem Probable Cause Solution

The heater will

not power on.

The thermal cut-off has been

activated

Unplug and turn the heater off; allow it to

cool for 30 minutes. Once the heater has

cooled off, check to make sure that there

are no objects on or adjacent to the unit. To

resume operation, plug the unit back in.

Heater is not plugged into a

120V polarized outlet/receptacle.

Ensure unit is in OFF position. Plug in unit

and attempt to turn on again.

Breaker/Fuse has been tripped.

Check your electrical box to confirm the

breaker has not been blown. This may

occur if the receptacle is shared between

other high consumption appliances.

Ensure unit is in the OFF position. Plug in

unit and attempt to turn on again.

Attempt to plug unit into another receptacle

in the house.

Power light is

on, but no heat

is emitting

from the unit.

Room temperature has warmed

up to thermostat setting.

To increase the room temperature, adjust

thermostat control knob to a higher setting

by turning clockwise.

The heating elements inside the

unit have not warmed up yet. Allow 15 minutes after the unit has been

turned on for the oil fins to heat.

The heater is

creating a

burning smell.

Check & ensure there are no

combustible materials 3’ (0.9 m)

surrounding the heater.

Remove the combustible units adjacent to

the heater.

The heater feet have not been

properly installed on the unit. Follow assembly instructions on how to

attach front and hind legs to the unit.

The heater is

making small

crackling

sounds.

It is normal for the heater to emit

small crackling sounds as it

heats the oil inside the fins.

Allow heater to operate for a period of time.

After the heater has warmed up, the

crackling sounds should stop. Do not be

alarmed. It will go away after approximately

15 minutes.

PLEASE DO NOT ATTEMPT TO OPEN OR REPAIR THE HEATER YOURSELF. DOING SO

COULD VOID THE WARRANTYAND CAUSE DAMAGE OR PERSONAL INJURY.

PARTS LIST

Please refer to the Schematic Drawing on the next page.

No. DESCRIPTION Qty

1 S-TYPE BODY 1

19 POWER CORD 1

2 SCREW 4

20 SCREW 2

3 THERMOSTAT 1

21 CORD CLAMP HOLDER 1

4 FRONT COVER 1

22 CORD CLAMP 1

5 SCREW 2

23 SCREW 2

6 THERMOSTAT KNOB 1

24 CERAMIC ASSY 1

7 CONTROL PANEL 1

25 SCREW 1

8 HANDLE 1

26 SCREW 1

9 SCREW 1

27 MANUAL SETTING

THERMAL CUT-OUT 1

10 SCREW COVER 1

28 SCREW 1

11 SCREW 4

29 HEATING TUBE 1

12 POWER SWITCH

COVER 1

30 PLUG WASHER 1

13 PANEL 1

31 FLOWER SCREW 4

14 POWER INDICATOR 1

32 CASTER 1

15 SCREW 3

33 U-TYPE BUTTON 2

16 BUSHING 1

34 RESETTABLE

THERMOSTAT 1

17 CORD WRAP 1

35 POWER SWITCH 2

18 SCREW 2

36 TIP-OVER SWITCH 1

SCHÉMA / SCHEMATIC DRAWING———————

Table of contents

Languages:

Other Uberhaus Heater manuals

Uberhaus

Uberhaus HMC-1500TW User manual

Uberhaus

Uberhaus 05775001 User manual

Uberhaus

Uberhaus 70395001 User manual

Uberhaus

Uberhaus 70395004 User manual

Uberhaus

Uberhaus PRO PH-936M User manual

Uberhaus

Uberhaus 1861 User manual

Uberhaus

Uberhaus HO-0221 User manual

Uberhaus

Uberhaus ECH106 User manual

Uberhaus

Uberhaus HC15-10 User manual

Uberhaus

Uberhaus HPS-C-GH User manual

Uberhaus

Uberhaus 1820 User manual

Uberhaus

Uberhaus PH-822 User manual

Uberhaus

Uberhaus 05775003 User manual

Uberhaus

Uberhaus PH-891 User manual

Uberhaus

Uberhaus 10625001 User manual

Uberhaus

Uberhaus Pro HFK48 Installation instructions manual

Uberhaus

Uberhaus HMFD-1500 User manual

Uberhaus

Uberhaus 97955001 User manual

Uberhaus

Uberhaus 68125104 User manual

Uberhaus

Uberhaus 68125108 User manual

Uberhaus

Uberhaus 10635000 User manual

Uberhaus

Uberhaus HC09C15 User manual

Uberhaus

Uberhaus 1362 User manual

Uberhaus

Uberhaus 68125105 User manual

Popular Heater manuals by other brands

oventrop

oventrop Regucor Series quick start guide

Blaze King

Blaze King CLARITY CL2118.IPI.1 Operation & installation manual

ELMEKO

ELMEKO ML 150 Installation and operating manual

BN Thermic

BN Thermic 830T instructions

KING

KING K Series Installation, operation & maintenance instructions

Empire Comfort Systems

Empire Comfort Systems RH-50-5 Installation instructions and owner's manual

Well Straler

Well Straler RC-16B user guide

EUROM

EUROM 333299 instruction manual

Heylo

Heylo K 170 operating instructions

Eterna

Eterna TR70W installation instructions

Clarke

Clarke GRH15 Operation & maintenance instructions

IRSAP

IRSAP The Radiator Company Ovali Fitting instructions

Empire Heating Systems

Empire Heating Systems WCC65 Installation and owner's instructions

Wetekom

Wetekom 92 86 43 Original instructions

Desa

Desa SPC170-F owner's manual

Watlow

Watlow Watrod Electric Tubular Heaters Specifications

Haverland

Haverland ECO-DRY GPS Series Instruction & installation manual

Stelpro

Stelpro ASILVC2060 Series user guide