twotrees TS2 User manual
Laser Engraver TS2
User Manual • Uživatelský manuál •
Užívateľský manuál • Használati utasítás •
Benutzerhandbuch
2
English
3 –28
Čeština
29 –54
Slovenčina
55 –80
Magyar
81 –106
Deutsch
107 –132
3
Dear customer,
Thank you for purchasing our product. Please read the following instructions carefully
before first use and keep this user manual for future reference. Pay particular attention
to the safety instructions. If you have any questions or comments about the device,
please contact the customer line.
✉www.alza.co.uk/kontakt
✆+44 (0)203 514 4411
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz
4
Letter from TWOTREES
Dear consumers,
Thank you for choosing us.
It’s customer-oriented idea, continuous innovation and pursuit of excellence that enable
very-body to have wonderful experience in using process. We believe that this manual
will be helpful. Hope you enjoy the good time with TwoTrees.
If you have any problems, please feel free to contact us via:
Website: www.twotrees3d.com
Facebook: https://www.facebook.com/group/twotrees3Dprinter
For general inquiry: info@twotrees3d.com
For technical support: service@twotrees3d.com
We will contact you within 24 hours.
Sincerely yours,
TwoTrees Team
Precautions
Please follow the instructions, due to misuse will be at your own risk.
1. Avoid looking steadily at the laser, which may damage your eyes.
2. Avoid touching directly during the machine working.
3. You can place a metal plate under the engraved or cut object to prevent your
table being burned through.
4. Avoid combustible object or gas.
5. Keep it away from children or pregnant women.
6. Do not take apart the laser without instructions.
7. Do not use it on material that reflects the light.
8. Wear goggles while taking off the laser cover.
9. Turn off the power when not use.
5
Safety guidelines
Warning: Laser engraving machine cannot directly carve or cut material that reflects the
light, may cause injury.
The product has a high engraving speed and is not recommended for industrial cutting.
And the laser head is a consumable.
Do not operate the laser head directly with your hands. Please wear goggles.
The laser diode is a sensitive component, please prevent static damage. (This product
has an electrostatic protection design, but there is still a possibility of damage.)
About your machine
1) X-axis Stepper Motor
2) Z-axis Stepper Motor
3) Laser Module
4) Control Box
5) Flash Buzzer
6) Emergency Stop Button
7) Z-axis Focusing Probe
8) X-axis Tensioner
9) Y-axis Stepper Motor
1) Y-axis Tensioner
2) X-axis Drag Chain
3) Y-axis Endstop/Limit Switch
4) Z-axis Manual Focusing Lifter Knob
5) X-axis Endstop/Limit Switch
6) Y-axis Drag Chain
7) Flame Detector Module
8) Y-axis lead rod
6
Part list
Front Frame X1
Y-axis Left Frame X1
Y-axis Right Frame X1
Back Frame X1
X-axis Stepper Motor X1
X-axis Crossbeam X1
Laser Module X1
X-axis drag chain X1
Screw Bolt M5*25 X6
Screw Bolt M5*40 X2
Screw Bolt M4*16 X5
Screw M3*6 X4
Screw M3*4 X4
Screw Bolt M3*6 X14
Y-axis Drag Chain Holder X1
Screw Bolt M5*20 X1
Tool Package X1
Data Cable X1
Power Adapter X1
Power Cable X1
7
Main parameters
Machine Size:
733 x 721 x 172 mm
Machine Weight:
8 kg
Engraving Size:
450 x 450 mm
Laser Wavelength:
445±5 mm
Engraving Accuracy:
0.1 mm
Engraving Speed:
10 000 mm/min
Software Support System:
Mac, windows
Material:
Aluminium profile + Sheet metal parts
Electrical Requirement:
24 V 4 A DC
Motherboard:
DLC ESP32 Motherboard (32bit)
Laser Power:
10 000 mw
File Format:
NC, BMP, JPG, PNG, GCODE, ETC
Supported Software:
LaserGRBL (Windows), Lightburn (Common)
Power Type:
USA/EU Plug (Optional)
Software Support Languages:
Chinese, English, Italian, French, German
Working Environment:
RHTemperature 5-40˚C, Humidity 20-60 % RH
Engraving Method:
USB connection/APP/Wireless computer WEB
terminal/Screen (optional)
Engraving Materials:
Wood, Plastic, Paper, Leather, Bamboo, Sponge
Paper, Alumina, Stainless Steel, Chevron, Acrylic,
Glass, etc.
Engraving Mode:
Image carving/Text carving/Scanning
carving/Contour carving/Pixel carving
8
Assembly
1.1 Install the Frames
Installation of Front Frame, Back Frame and Y-axis Left Frame
Front Frame x 1
Back Frame x 1
Y-axis Left Frame x 1
M5*25 Screw Bolt x 3
Please mind the buckle position of frame.
NOTE: Please set the Timing belt into Pulley groove and profile into buckle position
before tightening the screw bolts.
1.2 Installation of Y-axis Left Frame Timing belt & Idler Pulley
M4*16 Screw Bolt x 2
NOTE: Please set the Timing belt into Pulley groove before installing the Idler Pulley.
Synchronous wheel
Idler Pulley
9
1.3 Y-axis Left Tensioner adjustment
Please tighten tensioner screw in clockwise direction with hex key or loosen the belt in
counterclockwise direction.
NOTE: If tensioner too tight, Pulley would stuck. And if too loose, it would also affect
engraving result.
1.4 Installation of Y-axis Right Frame
Y-axis Right Frame Parts x 1
Screw Bolt M5*25 x 3
10
1.5 Installation of Y-axis Right Timing belt & Idler Pulley
Screw Bolt M4*16 x 2
NOTE: Please set the Timing belt into Pulley groove before installing the Idler Pulley
1.6 Adjustment of Y-axis Right Tensioner
Please tighten tensioner screw in clockwise direction with hex key or loosen the belt in
counterclockwise direction.
NOTE: If tensioner too tight, Pulley would stuck. And if too loose, it would also affect
engraving result.
2.1 Installation of X-axis Crossbeam Parts
X-axis Crossbeam Parts x 1
M5*40 Screw x 2
M5*20 Screw x 1
M4*16 Screw x 1
Other manuals for TS2
1
Table of contents
Languages:
Other twotrees Engraver manuals
