TW Audio VERADLV36 User manual
Operation manual
VERA DLV36
Operation manual VERA DLV36
2
Introduction
Thank you for choosing a high-quality product “MADEIN GERMANY” from TW AUDiO.
The VERA DLV36 dolly is an accessory for the VERA36 loudspeaker.
It is characterized by a subtle look, a remarkable size to weight ratio and ease of use.
If you lend your product to another party, inform that party of the safety-related operating pro-
cedures and hand over this operating manual. If you require additional copies of this manual,
you can obtain them free of charge from TW AUDiO or download them from: www.twaudio.de
Instructions in this user manual
Strictly adhere to the instructions contained in this operating manual that are marked as
follows:
This symbol in combination with the signal word “Caution” identifies a potentially hazardous
situation. Failure to comply with this safety instruction can lead to light or moderate injury.
This symbol in combination with the signal word “Note” identifies a potentially hazardous situ-
ation. Failure to comply with this safety instruction can lead to product damage.
This symbol in combination with the signal word “Tip” identifies additional information or notes
that will simplify working with TW AUDiO products on the basis of practical experience.
This symbol in combination with the signal word “Warning” identifies a potentially hazardous
situation. Failure to comply with this safety instruction can lead to serious injury or even death.
NOTE
TIP
CAUTION
WARNING
Operation manual VERA DLV36
3
Notes on the products
Read manual
before use!
Before using the dolly, carefully read the operation manual and keep it in a safe place together
with the VERA DLV36 dolly.
General information
Operation manual: OM-VERA DLV36
Version 1.0 en, 03/2019
© by TW AUDiO 2019; all rights reserved.
All information contained in this operating manual was correct to the best of our knowledge
at the time of printing.
Quality warranties or assurance of suitability for a certain type of use based on the technical
specifications, dimensions and weights are not granted by TWAUDiO.
TW AUDiO also shall not assume liability for any secondary damage (property damage and/or
personal injury) nor for the failure to comply with this operating manual!
TW AUDiO reserves the right to update this document based on recent developments.
TW AUDiO GmbH
Osterholzallee 140
71636 Ludwigsburg
Germany
Phone : + 49 (0) 71 41-48 89 89 0
Fax: + 49 (0) 71 41-48 89 89 99
WWW: www.twaudio.de
Operation manual VERA DLV36
4
Content
1. Safety | Intended use...................................................................................................... 5
2. Overview ........................................................................................................................ 7
2.1 Components ........................................................................................................... 7
3. Technical specifications .................................................................................................. 8
3.1 Data sheet............................................................................................................... 8
4. Commissioning............................................................................................................... 9
4.1 Preparation VERA36 loudspeaker............................................................................ 9
4.2 Mounting VERA36 loudspeaker on the VERA DLV36 dolly...................................... 11
4.3 Danger of tipping VERA DLV36 dolly with VERA36 loudspeaker ............................. 17
5. Transport and Storage.................................................................................................. 18
6. CE Declaration of Conformity........................................................................................ 19
7. Disposal ....................................................................................................................... 19
Operation manual VERA DLV36
5
1. Safety | Intended use
To avoid risks please observe the following safety instructions when using accessories.
The VERA DLV36 dolly was developed for use in professional sound systems. The loudspea-
ker may only be used by trained and qualified personnel.
Note the operating modes described in this operating manual. Other uses are not permis-
sible.
Damage caused by improper use is not covered by TWAUDiO.
The VERA DLV36 dolly may only be used with the VERA36 loudspeaker.
These assembly instructions describe how to use the VERADLV36 dolly. Any other use shall
be deemed improper and may result in damage or even injury.
Modifications or alterations to individual parts of the VERA DLV36 dolly are not permitted!
Danger to life!
WARNING
During and after each system setup, check that all quick-lock pins are always completely
inserted! All quick-lock pins must always be used!
WARNING
Before each use, check the integrity of the VERADLV36 dolly and ensure that all components
are in perfect condition.
WARNING
The VERA DLV36 is an accessory designed both for indoor and outdoor use.
CAUTION
The VERA DLV36 dolly may only be used by trained and qualified personnel. Personnel must
check the VERA DLV36 for its full suitability before each use.
WARNING
When visible damage to any part of the VERA DLV36 dolly is detected, it must be decommis-
sioned immediately.
WARNING
Operation manual VERA DLV36
6
When moving the VERA DLV36 dolly, ensure full load-bearing capacity and stability of the
substrate.
The VERA DLV36 dolly is specified for a load of not more than six VERA36 loudspeakers. This
load capacity must never be exceeded!
WARNING
During movement (assembly or dismantling, transport to the place of use) of the
VERA DLV36 dolly with VERA36 loudspeakers, ensure sufficient space to prevent collisions
with other objects.
WARNING
Operation manual VERA DLV36
7
1. Transport dolly - Polyurea coated surface
2. Retaining bracket
3. Ergonomic handle
4. Front angle (2 pieces)
5. Recesses for stacking the VERA DLV36 dollys (4 pieces)
6. Handle (4 pieces)
7. Swivel castors with brakes, 100mm (4 pieces)
Figure 2.1 - Overview
2. Overview
2.1 Components
1
23
4
6
7
5
Operation manual VERA DLV36
8
Maximum load capacity 6x VERA36
Dimensions (h x w x d) 100 x 700 x 650 mm [3,94 x 27,56 x 25,59 in]
Weight 10,5 kg [23,15 lbs]
Surface Pulyurea-coated
3. Technical specifications
3.1 Data sheet
Operation manual VERA DLV36
9
4.1 Preparation VERA36 loudspeaker
4. Commissioning
1. Loosen the two locking pins at the front of four VERA36 loudspeakers.
NOTE
Figure 4.1.1 - loosen locking pin in front
To prepare the VERA36 loudspeakers for transport on the dolly, proceed as follows:
2. Loosen the rear locking pin of four VERA36 loudspeakers.
NOTE
Figure 4.1.2 - loosen rear locking pin
Operation manual VERA DLV36
10
Figure 4.1.3 - move all sliders to sero degree
WARNING
3. Slide the right slider completely to the right. With one hand, pull the bracket all the way up
and with the other hand, slide the left slider completely to the right so that the rear rigging
is set to 0 degrees. Repeat this for all four VERA36 loudspeakers.
Table of contents
Other TW Audio Outdoor Cart manuals
