Easi-Speak
Moving Between Tracks
nWhile a track is Playing or Paused…
nPress the Previous or Next track button to move to the selected track.
nYou cannot change track while the unit is in Standby
Deleting a Track
While a track is Paused…
nPress and hold the red Record button
nThe Status LED will flicker, then return to orange
nThe track will be deleted from memory
nDo not delete files when the battery is low
Charging the Battery
Easi-Speak is supplied with a partially charged battery and can be used immediately
without charging first. The battery can be charged by connecting to the USB port of
an active computer or the charger. No software is required:
nConnect Easi-Speak to the USB port or charger
nThe Status LED will flash red and green (or orange if connected to the separate
charger)
nWhen Easi-Speak is fully charged the Status LED will change to steady green
nA complete charge of a fully discharged battery will take about 4 hours.
nDo not put a discharged battery into storage for long periods of time. It is
recommended that the product is charged before storage.
Connecting to a PC or Apple Mac
nRemove the end cap covering the USB connector, by pulling off, and switch off
the Easi-Speak.
nPlug the Easi-Speak into an available USB socket.
nThe first time Easi-Speak is connected to the PC, it will install the drivers and
may require the PC to be rebooted depending on your operating system.
nIf there is not sufficient space around the USB socket, then use the USB
extension lead provided
nThe PC or Mac will recognise the device as a USB mass storage device and it
will appear as a removable drive in the file explorer window.
nThe tracks you have recorded will appear in the folder MIC_REC. Use this same
folder to copy MP3 or WAV files on to, and for playback on Easi-Speak.
nYou can delete from, add files to, or format the Easi Speak directly from the PC
if you wish.
Installing & Using Audacity
nAudacity is free, open source software for recording and editing sounds. It is
available for Mac OS/X, Microsoft Windows, GNU/Linux and other operating
systems
nConnect Easi-Speak to the PC or Mac and browse to the Audacity folder
(contains release 1.2.6)
nFor Windows, run the file audacitywin.exe
nFor Mac OS/X (PPC), run audacitymac.dmg
nYou may find it easiest to copy the folder to your PC or Mac before doing this
nInstructions, latest versions for all operating systems and licence information
for Audacity can be found at http://audacity.sourceforge.net
