TSS Combo Rack User manual

Combo Rack

Read all safety warnings, instructions and

illustrations provided for this piece of strength

equipment. Failure to follow all instructions listed

below may result in serious injury or death. User assumes all potential

risks of assembly or use of this product.

PERSONAL SAFETY

●Stay alert, watch what you are doing when assembling and operating the

strength equipment. Do not use the strength equipment while you are

tired or under the influence of drugs, alcohol or medication. A moment

of inattention while operating or assembling the strength equipment may

result in serious or fatal injury.

EQUIPMENT USE AND CARE

●Visually inspect all components in order to identify potential

deformation or damage. If damages are observed, discontinue assembly

and contact the manufacturer at [email protected],

[email protected].

●There are components involved with the assembly of this piece of

strength equipment that are above 50lbs and it is recommended that you

have an additional person to assist in the positioning of these items.

●Ensure that all components are securely fastened before use.

1

Required Tools

●Crescent Wrench

●9/16” Socket and Wrench

Parts

CR-001 |(x1) |Part A

CR-002 |(x2) |Part B

CR-003 |(x2) |Part C

CR-004 |(x2) |Part D

2

CR-005 |(x1) |Part E

CR-006 |(x1) |Part F

CR-007 |(x2) |Part G

CR-008 |(x2) |Part H

CR-009 |(x4) |Part I

CR-010 |(x2) |Part J

*CR-100 |(x2) |Part FB*

(Upgrade)

3

*CR-200 |(x2) |Part FS*

(Upgrade)

⅜” x 4” Bolt |(x8) |Part K

⅜” Flat Washer |(x16) |Part L

⅜” Lock Nut |(x6) |Part M

⅜” x 3” Bolt |(x6) |Part O

⅜” Stover Nut |(x8) |Part P

½” Lock Washer |(x2) |Part Q

½” Nut |(x2) |Part R

½” x 4.5” Bolt |(x2) |Part S

Height Pin |(x4) or *(x6)* |Part T

4

Assembly

Place parts A, B and J in the orientation as seen in image 1.

5

Place parts K and P as seen in image 2. Tighten bolts with 9/16” socket

and crescent wrench.

6

Place part C in B with the logo facing out as seen in image 3.

7

Place parts Q, R, and S in orientation as seen in image 4.

8

*If face savers were purchased parts FB and FS are placed as seen

in image 5*

9

Table of contents

Other TSS Rack & Stand manuals

TSS

TSS 6-in-1 Yoke User manual

TSS

TSS 3x3 Power Rack with In-Line Weight Storage User manual

TSS

TSS Half Rack User manual

TSS

TSS 3x3 Power Rack with Belt Squat User manual

TSS

TSS Basic 2.5x2.5 Power Rack User manual

TSS

TSS 3x3 Power Rack with Hi/Low Cable System User manual

TSS

TSS 3x3 Power Rack with Hi/Low Cable System User manual

TSS

TSS 2.5 x 2.5 Power Rack with In-Line Weight... User manual

TSS

TSS 2.5 x 2.5 Power Rack with Belt Squat User manual

Popular Rack & Stand manuals by other brands

Salamander

Salamander Acadia AC/W/L400/WH Assembly instructions

Fohhn

Fohhn VAT-09 Mounting instruction

ricoo

ricoo FS0522 quick start guide

AMSOIL

AMSOIL BMK-22 Installation and service instructions

Kargo Master

Kargo Master 48220 installation guide

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 installation instructions

ricoo

ricoo S1222 installation instructions

Ready-Set-Mount

Ready-Set-Mount RSMCM602 instruction manual

VidaBox

VidaBox VB MNT FFS2 installation guide

Welch Allyn

Welch Allyn 48960 Assembly instructions

Arkon

Arkon CM035-ST-2 installation instructions

PROEL

PROEL PLWIN60C user manual

Agilent Technologies

Agilent Technologies E2609B installation guide

Mustang

Mustang MV-ARM4 installation guide

Mounting Solutions

Mounting Solutions WRM-320 manual

Pyle

Pyle PMKSPAD1 manual

ShelterIt

ShelterIt 21208 installation instructions

SPL

SPL RackPack?4 1040 manual 