TRYBIKE LOW TRICYCLE User manual

Thank you for buying an original Trybike!

Or maybe you got it as a present, which is

even nicer!

The Trybike can be used by children from

on year old upwards. Uniquely, it can grow

with your child, because you can turn it

from a tricycle into a bicycle with only

minor adjustments. You can also ip the

frame of the bicycle into a high posion so

children can use it even longer, or you can

have it at that same height as the tricycle

for loads of fun!

We have discovered that children with a

disability and children who nd it dicult

to keep their balance can really benet

from the Trybike as a tricycle, both in the

lower and in the higher posion.

USERINSTRUCTIONS

LOW TRICYCLE

LEARN TO WALKANDRIDEFROM12MONTHS

HIGH BICYCLE

THELOCALSUPERHERO!

LOW BICYCLE

LEARN TO BALANCE

HIGH TRICYCLE

JUST FOR FUN OR FOR

ADDITIONALSUPPORT

HAVE FUN WITH THE TRYBIKE!

Two brothers who are crazy about cycling.

We come from the Netherlands, where

almost everyone has one or two bikes.

We are enthusiasc cyclists, and we have

been imporng loads of fun toys, especially

ones with wheels – including balance bikes

– for more than 10 years by now. In 2015,

we started developing our own balance

bike, applying all of our knowledge as toy

sellers and enthusiasc cyclists during the

process. We had great fun designing the

perfect balance bike: durable, designed to

last, and, to top it all, darned good-looking

to boot! The result: the Trybike, which is

exactly the kind of bike we would have

loved to have as kids!

WE ARE

PIM AND ALEX

OF CO & CO

WATCH THE ASSEMBLY

INSTRUCTIONSBYSCANNING

THE QR-CODE

ENJOY YOUR TRYBIKE AND LET US KNOW

WHAT YOU THINK

Co&Co BV is the exclusive trademark holder of the gurave trademark TRYBIKE. The TRYBIKE

is protected by intellectual property rights. Co&Co BV reserves all rights.

TRYBIKE.NLTRYBIKE TRYBIKE

CO & CO BV, KONING LODEWIJKLAAN 40C, 7314 GG APELDOORN, THE NETHERLANDS

+31 55 522 28 63, WWW.COANDCO.NL, INFO@COANDCO.NL

WARNING!

• Adult assembly only!

• Read all assembly instrucons, warnings

and maintenance instrucons before you

start.

• If you do not read/follow these

instrucons carefully, the Trybike could

be assembled incorrectly and/or it may

get damaged, which could lead to serious

injury during use.

• Remove all bags, packaging materials

and protecve materials before allowing

a child to use the bike.

• The Trybike is not suitable for children

weighing more than 25kg/55lbs.

• Make sure the child wears proper

protecon gear when riding the Trybike.

Use an approved safety helmet and

closed-toe shoes. It is also a good idea

to wear gloves as well as elbow and

kneepads, long trousers and outer

garments with long sleeves.

• A child should always be under adult

supervision when riding the Trybike.

• Always let the child ride in front of you,

not behind you.

• Regularly check that all parts are

secure and undamaged, paying parcular

aenon to the handlebars, wheels and

seat. Make sure you perform a thorough

check-up 14 days aer assembly.

• If the Trybike is damaged, do not use

it again unl it has been repaired by an

authorised Trybike dealer.

• No more than ONE child on the Trybike

at a me!

• Before the child gets on the bike, explain

how they should use their feet to brake

and stop the Trybike.

• Never allow children to use the Trybike

on public roads, in areas where there

are cars, on slopes, on stairs, on or near

bridges or near water (e.g. swimming

pools, rivers, ponds, ditches, canals) or in

other places that could be dangerous.

• Do not use Trybike in the dark or at dusk.

• Keep these instrucons and safety

precauons in a safe place for future

reference.

• Co&Co cannot be held liable for injuries

or accidents incidents caused by the use

of a Trybike. The buyer accepts the risks

involved in the use of the Trybike.

TRYBIKE FOLLOW YOUR FEET

8 7

23456 1

578 246 13

F F

DRAWN

CHK'D

APPV'D

MFG

Q.A

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN MILLIMETERS

SURFACE FINISH:

TOLERANCES:

LINEAR:

ANGULAR:

FINISH:

DEBURR AND

BREAK SHARP

EDGES

NAME

SIGNATURE

DATE

MATERIAL:

DO NOT SCALE DRAWING

REVISION

TITLE:

DWG NO.

SCALE:1:3

SHEET 1 OF 12

WEIGHT:

fig1.

FITTINGTHEFRONTWHEELINTOTHEFRAME

Place the long nylon bushings in the wheel, with the

narrower part of the bushing ng into the bearing of the

wheel. Place the wheel with the nylon bushings between

the front forks so that the holes of the front forks are

exactly aligned with the holes of the bushings. Insert the

axle through the front forks, the bushings and therefore

also through the wheel. Before you push the axle all the

way through, put the nut on one side of the axle, giving it a

few turns. Push the axle completely through the hole and

t the nut on the other side, again giving it a few turns.

Once ed, ghten the nuts properly on both sides and

check that the wheel rotates smoothly.

8 7

23456 1

578 246 13

F F

DRAWN

CHK'D

APPV'D

MFG

Q.A

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN MILLIMETERS

SURFACE FINISH:

TOLERANCES:

LINEAR:

ANGULAR:

FINISH:

DEBURR AND

BREAK SHARP

EDGES

NAME

SIGNATURE

DATE

MATERIAL:

DO NOT SCALE DRAWING

REVISION

TITLE:

DWG NO.

SCALE:1:3

SHEET 4 OF 12

WEIGHT:

fig3.

ASSEMBLINGTHETRYBIKE

We have already parally assembled the

Trybike. We would love to put the enre

bike together for you beforehand, but then

we would have to ship it in a large box. This

would make transportaon very expensive,

it would be bad for the environment and

no fun for the poor postman.

8 7

23456 1

578 246 13

F F

DRAWN

CHK'D

APPV'D

MFG

Q.A

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN MILLIMETERS

SURFACE FINISH:

TOLERANCES:

LINEAR:

ANGULAR:

FINISH:

DEBURR AND

BREAK SHARP

EDGES

NAME

SIGNATURE

DATE

MATERIAL:

DO NOT SCALE DRAWING

REVISION

TITLE:

DWG NO.

SCALE:1:4

SHEET 2 OF 12

WEIGHT:

fig2.

8 7

23456 1

578 246 13

F F

DRAWN

CHK'D

APPV'D

MFG

Q.A

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN MILLIMETERS

SURFACE FINISH:

TOLERANCES:

LINEAR:

ANGULAR:

FINISH:

DEBURR AND

BREAK SHARP

EDGES

NAME

SIGNATURE

DATE

MATERIAL:

DO NOT SCALE DRAWING

REVISION

TITLE:

DWG NO.

SCALE:1:4

SHEET 2 OF 12

WEIGHT:

fig2.

8 7

23456 1

578 246 13

F F

DRAWN

CHK'D

APPV'D

MFG

Q.A

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN MILLIMETERS

SURFACE FINISH:

TOLERANCES:

LINEAR:

ANGULAR:

FINISH:

DEBURR AND

BREAK SHARP

EDGES

NAME

SIGNATURE

DATE

MATERIAL:

DO NOT SCALE DRAWING

REVISION

TITLE:

DWG NO.

SCALE:1:4

SHEET 2 OF 12

WEIGHT:

fig2.

8 7

23456 1

578 246 13

F F

DRAWN

CHK'D

APPV'D

MFG

Q.A

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN MILLIMETERS

SURFACE FINISH:

TOLERANCES:

LINEAR:

ANGULAR:

FINISH:

DEBURR AND

BREAK SHARP

EDGES

NAME

SIGNATURE

DATE

MATERIAL:

DO NOT SCALE DRAWING

REVISION

TITLE:

DWG NO.

SCALE:1:4

SHEET 2 OF 12

WEIGHT:

fig2.

WHAT IS IN THE BOX?

• Trybike user instrucons

• Frame with front forks aached to it.

• 3 x wheels

• Handlebar

• Long rear axle with three aluminium

pipes, four short nylon bushings and two

long nuts

• 2 x short front wheel axles with two long

nylon bushings and two long nuts

• Seat cover

• Chin guard

• 2 x grips for the handlebar

• 2 x Allen keys

TRYBIKE DISCOVERTHEWORLD

8 7

23456 1

578 246 13

F F

DRAWN

CHK'D

APPV'D

MFG

Q.A

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN MILLIMETERS

SURFACE FINISH:

TOLERANCES:

LINEAR:

ANGULAR:

FINISH:

DEBURR AND

BREAK SHARP

EDGES

NAME

SIGNATURE

DATE

MATERIAL:

DO NOT SCALE DRAWING

REVISION

TITLE:

DWG NO.

SCALE:1:4

SHEET 5 OF 12

WEIGHT:

fig4.

8 7

23456 1

578 246 13

F F

DRAWN

CHK'D

APPV'D

MFG

Q.A

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN MILLIMETERS

SURFACE FINISH:

TOLERANCES:

LINEAR:

ANGULAR:

FINISH:

DEBURR AND

BREAK SHARP

EDGES

NAME

SIGNATURE

DATE

MATERIAL:

DO NOT SCALE DRAWING

REVISION

TITLE:

DWG NO.

SCALE:1:4

SHEET 5 OF 12

WEIGHT:

fig4.

FITTING THE HANDLEBAR INTO

THE FRONT FORKS

Place the chin guard between the holes at the top of the

front forks and push the wooden handlebar through the front

forks and the chin guard. You will noce two grooves on the

handlebar. Insert the handlebar so the grooves end up outside

the front forks. Fasten the two screws at the boom of the top

“ball” of the front forks in the handlebar to secure it, see arrow in

picture. Now t the grips to the handlebar. If this is dicult then

dampen the grips with a lile water on the inside and try again.

ADJUSTING THE SEAT

The seat and seat post have already been ed. Before

use, secure the seat post with two bolts through hole

1 and hole 2, see picture. The third hole is used for

posioning the seat in the high Trybike mode.

The seat post is wedged prey ghtly into the frame, so

you may have to pull the frame apart a lile to t the seat

post when you want to lower or raise the seat.

The Trybike grows with your child by ipping the frame to

the high mode. Use holes 1 and 3 for the high mode, as

shown in the picture.

CORRECT SEAT HEIGHT

The seat is at the right height when the child can just reach

the oor with his or her heels. If the seat is too low in

tricycle mode, the heels tend to touch the back axle, and in

bicycle mode, the child’s feet will end up dragging slightly.

So make sure the seat is not too low.

DETAIL

SCALE

1 : 3

8 7

23456 1

578 246 13

F F

DRAWN

CHK'D

APPV'D

MFG

Q.A

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN MILLIMETERS

SURFACE FINISH:

TOLERANCES:

LINEAR:

ANGULAR:

FINISH:

DEBURR AND

BREAK SHARP

EDGES

NAME

SIGNATURE

DATE

MATERIAL:

DO NOT SCALE DRAWING

REVISION

TITLE:

DWG NO.

SCALE:1:4

SHEET 6 OF 12

WEIGHT:

fig5a

DETAIL

SCALE

1 : 3

8 7

23456 1

578 246 13

F F

DRAWN

CHK'D

APPV'D

MFG

Q.A

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN MILLIMETERS

SURFACE FINISH:

TOLERANCES:

LINEAR:

ANGULAR:

FINISH:

DEBURR AND

BREAK SHARP

EDGES

NAME

SIGNATURE

DATE

MATERIAL:

DO NOT SCALE DRAWING

REVISION

TITLE:

DWG NO.

SCALE:1:4

SHEET 7 OF 12

WEIGHT:

fig5b

DETAIL

SCALE

1 : 3

8 7

23456 1

578 246 13

F F

DRAWN

CHK'D

APPV'D

MFG

Q.A

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN MILLIMETERS

SURFACE FINISH:

TOLERANCES:

LINEAR:

ANGULAR:

FINISH:

DEBURR AND

BREAK SHARP

EDGES

NAME

SIGNATURE

DATE

MATERIAL:

DO NOT SCALE DRAWING

REVISION

TITLE:

DWG NO.

SCALE:1:4

SHEET 7 OF 12

WEIGHT:

fig5b

TRYBIKE LIGHTNINGFAST

ASSEMBLY OF THE LONG REAR AXLE AND THE TWO WHEELS

Insert the short aluminium pipe in between the

rear forks. Push the long axle through the holes

of the rear forks and through the aluminium pipe.

Push the long aluminium pipes over the axle on the

le and right. Place the short nylon bushings into

the wheel, with the narrower part of the bushing

ng into the bearing of the wheel. Then slide

one wheel with the bushings over the rear axle

and fasten the wheel with the nut by giving it a

few turns and repeat the procedure on the other

side. Once both wheels are ed, ghten the nuts

properly on both sides and check that the wheels

rotate smoothly.

FITTINGTHESEAT COVER

The boom of the seat cover has a Velcro fastening. Place

the cover on the seat, with the Trybike logo facing to the

back and make sure that the Velcro fastenings are properly

stuck together. Pull the sides of the seat cover over the

seat and fasten the underside of the seat.

CONVERTINGTHETRYBIKEFROM

A TRICYCLE INTO A BICYCLE

Detach the long axle with the two wheels from the rear forks.

The rear wheel is basically mounted the same way as the front

wheel, but the rear wheel is a bit more dicult to do because it

is subject to some tension. So you may have to pull the prongs

of the rear forks apart.

Place the long nylon bushings into the wheel, with the narrower part of the bushing ng

into the bearing of the wheel. Place the wheel with the nylon bushings between the rear

forks so the holes of the rear forks are exactly aligned with the holes of the bushings. Insert

the axle through the rear forks, the bushings and therefore also through the wheel. Before

you push the axle all the way through, put the nut on one side of the axle, giving it a few turns.

Push the axle completely through the hole and put the nut on the other side, again giving it

a few turns. Once ed, ghten the nuts properly on both sides and check that the wheel

rotates smoothly.

8 7

23456 1

578 246 13

F F

DRAWN

CHK'D

APPV'D

MFG

Q.A

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN MILLIMETERS

SURFACE FINISH:

TOLERANCES:

LINEAR:

ANGULAR:

FINISH:

DEBURR AND

BREAK SHARP

EDGES

NAME

SIGNATURE

DATE

MATERIAL:

DO NOT SCALE DRAWING

REVISION

TITLE:

DWG NO.

SCALE:1:3

SHEET 8 OF 12

WEIGHT:

fig6.

8 7

23456 1

578 246 13

F F

DRAWN

CHK'D

APPV'D

MFG

Q.A

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN MILLIMETERS

SURFACE FINISH:

TOLERANCES:

LINEAR:

ANGULAR:

FINISH:

DEBURR AND

BREAK SHARP

EDGES

NAME

SIGNATURE

DATE

MATERIAL:

DO NOT SCALE DRAWING

REVISION

TITLE:

DWG NO.

SCALE:1:2

SHEET 9 OF 12

WEIGHT:

fig7.

8 7

23456 1

578 246 13

F F

DRAWN

CHK'D

APPV'D

MFG

Q.A

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN MILLIMETERS

SURFACE FINISH:

TOLERANCES:

LINEAR:

ANGULAR:

FINISH:

DEBURR AND

BREAK SHARP

EDGES

NAME

SIGNATURE

DATE

MATERIAL:

DO NOT SCALE DRAWING

REVISION

TITLE:

DWG NO.

SCALE:1:3

SHEET 10 OF 12

WEIGHT:

fig8.

TRYBIKE WALKINGTHEWORLD

CONVERTINGTHETRYBIKEFROMA

LOW BICYCLE INTO A HIGH BICYCLE

First, dismantle the handlebar and the front wheel, then

loosen the axle that ts through the frame and the front forks.

One axle nut is located on top of the front forks, under the

handlebar, the other nut is located at the boom, above the

front wheel. Loosen the nuts unl one of them is completely

loose. Now pull the axle from the front forks in the direcon in

which the nut is sll aached to the axle.

Once the axle has been separated from the front forks, carefully slide the frame out of the

front forks. Cauon! Make sure the frame is in the middle of the front forks so the second

axle can be pushed out through the slot. Do not force it, because it could damage the

wood. Keep a hold of the protecve caps so they do not fall.

The second axle is a safety axle; it makes

sure that the forks do not spread too far

and prevents ngers from being pinched

between the frame and the front forks. So

it is very important to posion this axle

correctly.

Flip the frame around so the seat is upside

down and slide the frame carefully into the

front forks. Make sure the frame is in the

middle of the front forks so the second axle

can be pushed in through the slot. Check that the protecve caps are back in posion

between the frame and the front forks.

Make sure the holes of the front forks are aligned with the holes of the frame. Slide the

axle with the screw thread from the top downwards into the front forks and through the

frame. Tighten the nuts and check that the front forks rotate smoothly in the frame. Also

check that the space between the frame and the front forks is at least 12 mm (roughly

the thickness of your lile nger) when you move the forks all the way to the le or right.

Now reassemble the handlebar and the front wheel.

Detach the seat from the frame and t it on the other side of the frame. Now use holes 1

and 3 to fasten the seat. See the secon on adjusng the seat.

DETAIL

SCALE

2 : 5

8 7

23456 1

578 246 13

F F

DRAWN

CHK'D

APPV'D

MFG

Q.A

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN MILLIMETERS

SURFACE FINISH:

TOLERANCES:

LINEAR:

ANGULAR:

FINISH:

DEBURR AND

BREAK SHARP

EDGES

NAME

SIGNATURE

DATE

MATERIAL:

DO NOT SCALE DRAWING

REVISION

TITLE:

DWG NO.

SCALE:1:5

SHEET 12 OF 12

WEIGHT:

fig10.

fig9.

TRYBIKE THEGROWBIKE

MAINTENANCE

Regularly check that all parts are secure

and undamaged, paying parcular

aenon to the handlebars, wheels and

seat. Make sure you perform a thorough

check-up 14 days aer assembly.

TYRES

We recommend that you inate all the

tyres to approximately 30 psi to 35 psi (2.0

to 2.4 bar). You should sll be able to push

the tyre in a lile with your thumb. Do not

overinate the tyres. Do not exceed 35 psi,

because the tyre may burst!

Regularly check the tyres and wheels for

damage and correct tyre pressure.

PROTECTION

Treat the wooden parts of the Trybike with

beeswax to keep the wood looking nice for

longer.

CLEANING

To clean the Trybike, use car wash

detergents, lukewarm water and a so

cloth. Apply beeswax aerwards to protect

the paint.

LUBRICATION

Lubricate the axles and the bearings of the

wheels lightly with standard bicycle oil.

STORAGE

Store the Trybike in a warm, dry and well-

venlated area. Do not keep it outside or in

a cold damp storage area.

WARRANTY

Designing our bikes took a lot of me, and

each Trybike is manufactured with great

care and aenon. Every Trybike is checked

separately, but producon errors may sll

slip through. That’s why the Trybike comes

with a warranty period of one year from the

date of purchase against any manufacturing

defects. We will repair or replace the Trybike

free of charge during this period if you should

encounter any manufacturing defects. If

you have any problems with your Trybike,

please contact the (online) store where you

purchased your Trybike.

This warranty is valid only for the original

purchaser who bought the product new from

an authorised dealer of our products, so

make sure you keep a copy of your receipt.

Your warranty is likely to become void if

you modied the Trybike in any way, if the

problem is due to normal wear and tear, if

you bought the Trybike in a used condion

or if the Trybike has not been correctly used

and/or maintained.

Please contact us if you have any problem

with your Trybike, because we can always

help you, even if your warranty is no longer

valid. We designed the Trybike so all of its

parts can be xed, and you can also order

all parts separately. We will do everything

we can to ensure that children can enjoy the

Trybike for as long as possible.

Your rights may vary by country.

This product complies with the following toy safety requirements: EN 71 and

This manual suits for next models

Table of contents

Other TRYBIKE Bicycle manuals

TRYBIKE

TRYBIKE High Bicycle User manual

TRYBIKE

TRYBIKE TRIKE KIT User manual

TRYBIKE

TRYBIKE STEEL User manual

Popular Bicycle manuals by other brands

RAMBO

RAMBO R1000X2M-FF-BFD manual

Vermeiren

Vermeiren SAFARI Maintenance manual

Velec

Velec A2/36V owner's manual

Coswheel

Coswheel A-ONE user manual

Betzold

Betzold 97869 quick start guide

Cervélo

Cervélo S3 2019 Assembly manual

Tenways

Tenways AGO X user manual

Festo

Festo EGSC-BS-KF Instructions & Operating

Gio Electric

Gio Electric H1 Volt owner's manual

GOGOBEST

GOGOBEST GM30 user manual

DAHON

DAHON CIAO - 2009 manual

Aprimatic

Aprimatic ONDA 500 Installation, use and maintenance instructions

MV Agusta

MV Agusta Lucky Explorer GRAVEL Manual for use and maintenance

Greyp

Greyp G6 Series user manual

Babboe

Babboe Carve-E user manual

Huka

Huka orthros manual

Xtracycle

Xtracycle Stoker 2021 Assembly manual

APRILIA

APRILIA DORSODURO 750 ABS 2015 manual