Trust SpaceC@m 300 User manual
Trust SpaceC@m 300
NL
TRUST SPACEC@M 300
Instruction Manual
Version 3.0
Trust SpaceC@m 300
01 UK 11995 SPACE300V3.DOC
Thank you
Thank you very much for purchasing this product from the Trust range. We wish you hours of fun
with it. Please read this manual carefully before using the product.
Registration
Register your purchase now at the Trust Internet site, www.trust.com, so that you are able to
receive optimal guarantee and service support. You will be automatically informed of
developments to your product and of other Trust products. You will also have the chance to win
some spectacular prizes.
Copyright statement
No part of this instruction manual may be reproduced or transmitted, in any form or by any means,
electronic or mechanical, including photocopying, recording, or information storage and retrieval
systems, for any purpose other than the purchaser's own personal use, without prior written
permission from the manufacturer.
Disclaimer statement
The manufacturer specifically disclaims all warranties, either express or implied, including, but not
limited to, implied warranties for the marketability and suitability for a particular purpose, with
respect to the software, the accompanying product manual(s) and written material, and all other
accompanying hardware. The manufacturer reserves the right to revise or make improvements to
its product at any time and without obligation to notify any person of such revisions or
improvements.
In no event shall the manufacturer be liable for any consequential or incidental damages, including
any loss of business profits or any other commercial damages, arising out of the use of its
products.
All company or product names are trademarks or registered trademarks of their respective
owners.
Trust SpaceC@m 300
1
NL
Contents
1. Introduction ..................................................................................................................................... 2
1.1 Conventions used in this manual .......................................................................................... 2
1.2 Contents of the package ......................................................................................................... 2
1.3 Minimum system requirements .............................................................................................. 2
2. Safety ............................................................................................................................................... 3
2.1 General...................................................................................................................................... 3
3. Functions of the ‘Trust SpaceC@m 300’...................................................................................... 3
4. Installation ....................................................................................................................................... 4
4.1 Installing the ‘Trust SpaceC@m 300’ driver.......................................................................... 4
4.2 Installing Ulead Photo Express 3.0 SE .................................................................................. 5
4.3 Installing Acer EasyXpress VideoMail 2.2 ............................................................................. 9
4.4 Installation Microsoft ® NetMeeting (Windows 98 / Me / 2000) ......................................... 12
5. Using the camera and the applications ...................................................................................... 16
5.1 Trust SpaceC@m 300 Software............................................................................................ 16
5.1.1 Description of the functions .......................................................................................... 16
5.1.2 Advanced image settings............................................................................................... 17
5.1.3 Taking a snapshot........................................................................................................... 18
5.1.4 Zoom in & zoom out ....................................................................................................... 19
5.2 Using Ulead PhotoExpress 3.0 SE ....................................................................................... 19
5.3 Using Acer EasyXpress VideoMail 2.2 ................................................................................. 21
5.4 Using Microsoft ® NetMeeting.............................................................................................. 24
6. Troubleshooting ........................................................................................................................... 28
7. Specifications................................................................................................................................ 29
8. Trust Customer Care Centres...................................................................................................... 30
Trust SpaceC@m 300
2
1. Introduction
This instruction manual is intended for users of the Trust SpaceC@m 300. Prior knowledge of computers is
not necessary to install and use this product. If you have any questions, please consult one of the Trust
Customer Care Centres. You can find more information about these Customer Care Centres on the last page
of this electronic manual, as well as at the back of the quick installation manual.
1.1 Conventions used in this manual
The following conventions have been used in this manual to indicate instructions:
<key> Here you should press a key. The name of the key is given between brackets.
‘System’ This is a specific term used in a program. These are the terms used by, for example,
Microsoft Windows 98.
[DIR] Key in the text shown in square brackets [….].
{Term} The text between the accolades {….} is the term in English, e.g. {File} which occurs in the
associated figure.
Additional information will be shown as follows:
Note: If you connect the Trust Spacec@m 300 to a USB HUB, then the USB HUB should have its own
power supply.
The examples assume that the letter “D” has been assigned to your CD-ROM drive. If your system uses a
different drive letter for your CD-ROM drive, for example “E”, you should replace “D” by “E”.
1.2 Contents of the package
Please check the contents of the package before reading the instruction manual. It should contain the
following:
•Trust SpaceC@m 300
•Headphones with microphone
•CD-ROM containing the drivers, software and instruction manuals
•Quick installation manual
If anything is missing or damaged, please contact one of the Trust Care Centres. You can find more
information at the back of this instruction manual.
1.3 Minimum system requirements
•Intel Pentium 166 MMX CPU
•USB port
•Windows 98
•32 MB RAM
•60 MB hard disk space available
•4X CD-ROM drive
Recommended system configuration for full operation of the programs:
•ISDN adapter or modem
•Sound card with speakers and microphone
•Internet account
Trust SpaceC@m 300
3
NL
2. Safety
2.1 General
1. Do not use the device in a damp environment.
2. Do not try to repair the device yourself.
3. Under the following circumstances have the device repaired by qualified personnel:
a) The cable or plug is damaged or worn.
b) Liquid has entered the device.
c) The device has fallen and/or the casing has been damaged.
4. Position the device so that the cables cannot be damaged.
3. Functions of the ‘Trust SpaceC@m 300’
Figure 1: Functions of the ‘Trust SpaceC@m 300’
ASnapshot button; Takes a picture when this button is pressed.
BLens; turn the lens to make the image sharp.
CLED; goes on when the camera is in use.
DUSB connection
Table 1: Functions of the SpaceC@m 300
Trust SpaceC@m 300
4
4. Installation
4.1 Installing the ‘Trust SpaceC@m 300’ driver
1. Insert the CD-ROM into your CD-ROM drive and the program will start automatically. Should this not
happen, start up ‘Setup.exe’ in the CD. Figure 2 will appear.
Figure 2: Installating the driver
2. Click on ‘TRUST SPACEC@M 300’ to install the driver. Figure 3 will appear.
Figure 3: Installation of driver
3. Click on ‘Next’ to start the installation. Figure 4 will appear.
Trust SpaceC@m 300
5
NL
Figure 4: Installation of driver
4. Click on ‘Next’ to start the installation. After the driver has been installed, figure 5 will appear.
Figure 5: Installing the driver
5. Connect the camera’s USB connection D(see Figure 1) to a free USB port of your computer. Windows
98 will detect the new hardware and automatically install the Trust SpaceC@m 300 driver program.
6. Now connect the headphones with the microphone to the sound card. For this see the symbol on both
plugs.
You have now completed the installation of the driver program. Continue to chapter 4.2 for the installation of
Ulead Photo Express 3.0 SE.
4.2 Installing Ulead Photo Express 3.0 SE
Ulead Photo Express 3.0 SE is an image editor which you can use to load and edit the images on your
computer that you have taken using the SpaceC@m 300. Follow the instructions below to install Ulead Photo
Express 3.0 SE.
1. In the installation screen, click on 'Install Ulead Photo Express 3.0 SE'. See figure 2. Figure 6 will
appear.
Trust SpaceC@m 300
6
Figure 6: Installing Ulead Photo Express 3.0 SE
2. Click on 'Install'. Figure 7 will appear.
Figure 7: Installing Ulead Photo Express 3.0 SE
3. Click on 'Next'. Figure 8 will appear.
Figure 8: Installing Ulead Photo Express 3.0 SE
4. Click on 'Yes' to accept the license agreement and continue with the installation. Figure 9 will appear.
Trust SpaceC@m 300
7
NL
Figure 9: Installing Ulead Photo Express 3.0 SE
5. Click on 'Next'. A screen similar to figure 10 will appear.
Figure 10: Installing Ulead Photo Express 3.0 SE
Trust SpaceC@m 300
8
6. Click on ‘Typical’. Figure 11 will appear.
Figure 11: Installing Ulead Photo Express 3.0 SE
7. Click on 'Next'. Figure 12 will appear.
Figure 12: Installing Ulead Photo Express 3.0 SE
8. Click on 'Next'. Ulead Photo Express 3.0 SE will now be installed. Figure 13 will appear after the
installation.
Table of contents
Other Trust Webcam manuals
Trust
Trust WB-6200p User manual
Trust
Trust WB-3300p User manual
Trust
Trust 14823 User manual
Trust
Trust WB-3400T User manual
Trust
Trust WB-1400T User manual
Trust
Trust SPACECAM 150 User manual
Trust
Trust WB-3100P User manual
Trust
Trust 15562 User manual
Trust
Trust WB-6250X User manual
Trust
Trust 16428 User manual
