Trust START-LINE APA3-1500R User manual

APA3-1500R STARTER SET WIRELESS SWITCHING

COMPATIBILITY

This set can be combined with all trust smart

home transmitters and receivers.

FUNCTIONALITY

3 Mains socket switches to switch lights or

electronic devices on/o up to 1500 Watt with the

included remote control

WIRELESS RADIO SIGNAL

• The 433.92 MHz radio signal passes through walls, windows and doors.

• Indoor range: up to 30 m. Outdoor range: up to 70 m. (optimal conditions)

• The range is strongly dependent on local conditions, such as the presence of metals. For example,

the thin metal coating in Low-emissivity (Low-E) glass has a negative impact on the range of radio

signals.

TECHNICAL SPECIFICATIONS RECEIVER

Power supply input 220-240 VAC 50 Hz

Maximum load 1500 Watt

RF frequency 433,92 MHz

RF range Up to 30m indoor/ 70m outdoor (optimal conditions)

Memory addresses 3

TECHNICAL SPECIFICATIONS TRANSMITTER

Battery 1x 3 V CR2032 lithium

RF frequency 433.92 MHz

RF range Up to 30m indoor/ 70m outdoor (optimal conditions)

Channels 3 + Group o

APA3-1500R STARTER SET WIRELESS SWITCHING

Read this manual carefully. Not following them may be dangerous and faulty installation will invalidate

any warranty that may apply to this product.

MAXIMUM LOAD

Never connect lights or equipment that exceed

the maximum load of the receiver, as it can result

in defects.

SHOCK HAZARD

Exercise caution when installing a receiver.

Voltage may be present, even when a receiver is

switched o.

BATTERY

Remove the battery if the product will not

be used for an extended period. Extreme

temperatures reduce the capacity and lifetime of

the battery. Dispose of batteries according to local

regulations. Please recycle when possible.

LIFE-SUPPORT

Never use trust smart home products for life-

support systems or other applications in which

equipment malfunctions can have life-threatening

consequences.

INTERFERENCE

All wireless devices may be subject to

interference, which could aect performance. The

minimum distance between 2 receivers should be

at least 50 cm.

REPAIRING

Do not attempt to repair this product. There are

no user-serviceable parts inside.

WATER-RESISTANCE

This product is not water-resistant. Keep it dry.

Moisture will corrode the inner electronics and

can result in a short circuit, defects and shock

hazard.

CLEANING

Use a dry cloth to clean this product. Do not use

harsh chemicals, cleaning solvents, or strong

detergents.

HANDLING

Do not drop, knock, or shake the device. Rough

handling can break internal circuit boards and ﬁne

mechanics.

ENVIRONMENT

Do not expose the product to excessive heat

or cold, as it can damage or shorten the life of

electronic circuit boards.

APA3-1500R STARTER SET WIRELESS SWITCHING

Remote control

(1) LED-indicator

(2) ON/OFF buttons*

(3) Group OFF button*

*When using an OFF button or the

group OFF button the connected light(s)/

device(s) is/are switched o and the

receiver is put in stand-by.

APA3-1500R STARTER SET WIRELESS SWITCHING

Assigning dierent channels to

dierent receivers

When you would like to control multiple

receivers independently, you can assign a

desired channel to a speciﬁc receiver like

depicted above.

Switching multiple receivers to stand-by with the

group OFF function

By using the group OFF function ( ) you can switch the

connected receivers to stand-by. The connected lights and

devices will be switched OFF.

and/

etc.

and/

1. Connect lamp/device

First check if the lamp or device is turned

on. Then plug the lamp or device into the

receiver. Do not exceed the maximum load:

1500 W

2a. Assign transmitter code

Placing the receiver into a socket will

automatically activate the learn-mode for 5

seconds. The LED-indicator on the receiver

will blink slowly. To reactivate the learn-

mode, remove the receiver from the socket,

wait 10 seconds, then insert the receiver into

the socket again.

APA3-1500R STARTER SET WIRELESS SWITCHING

3. Manual operation with a transmitter

1. Send an ON-signal to switch the receiver on.

2. Send an OFF-signal to put the receiver in stand-by.

APA3-1500R STARTER SET WIRELESS SWITCHING

Other manuals for START-LINE APA3-1500R

Table of contents

Other Trust Switch manuals

Trust

Trust ACM-3000H2 User manual

Trust

Trust SECURITY PLUS-LINE AGST-8800 User manual

Trust

Trust 15919 User manual

Trust

Trust APC Starter Set Wireless Switching User manual

Trust

Trust 71075 User manual

Trust

Trust SMART Home AWMR-230 User manual

Trust

Trust START-LINE AWST-9000Z User manual

Trust

Trust PREMIUM ZCM-1800 User manual

Trust

Trust 12276 User manual

Trust

Trust 411E User manual

Trust

Trust 12914 User manual

Trust

Trust 71263 User manual

Trust

Trust 12634 User manual

Trust

Trust 71152 User manual

Trust

Trust 11670 User manual

Trust

Trust SMART Home START-LINE RECEIVER AWS-3500 Operating manual

Trust

Trust START-LINE AMU-500 User manual

Trust

Trust Start Series User manual

Trust

Trust START-LINE APA3-1500R User manual

Trust

Trust START-LINE AGST-8800 User manual

Trust

Trust SECURITY PLUS-LINE AGST-8800 User manual

Trust

Trust HU-4445p User manual

Trust

Trust HU-1140P User manual

Trust

Trust HU-3340p User manual

Popular Switch manuals by other brands

URC

URC Total Control MFS-8 installation manual

Azbil

Azbil HPQ-D11 user manual

Sony

Sony DFS-900M operating instructions

SICK

SICK i17S operating instructions

F&F

F&F SZR-277 quick start guide

Shure

Shure UAMS/BK user guide

Dräger

Dräger X-zone Switch Off Instructions for use

Asco

Asco Joucomatic 349 Series manual

BT Mini Hub user guide

D-Link

D-Link DES-1226G manual

Johnson Controls

Johnson Controls FS80-C installation instructions

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Configuration guide

MicroNet

MicroNet SP1200A user manual

Ruijie

Ruijie RG-PF2920 Series Hardware installation and reference guide

Altinex

Altinex DA1914SX user guide

MiLAN

MiLAN MIL-SM2401M user guide

RJM

RJM MASTERMIND PBC/6X user manual

Atlas

Atlas MMK-KVM8 owner's manual