Trotec TDS 50 User manual

TDS 50

TRT-BA-TDS50-TC-002-EN

OPERATING MANUAL

ELECTRIC HOT AIR

GENERATOR

Operating Manual – Electric hot air generator

1EN

SAFETY INSTRUCTIONS

m Please read the instructions carefully and

throughly before assembling, using or

cleaning the appliance. The use of the heater

can cause severe injury due to burns, fire or

electrical discharge.

This appliance is transportable and made especially

for closed quarters such as warehouses, shops and

homes, as well as for humid and damp quarters such

as construction sites. The appliance complies with di-

rective EN 60335-2-30/1998, Keymark all.B control,

and therefore directive B.T. 73/23/EEC and 93/68EEC.

• Keep the appliance at a minimum-security distance of

0.5 metres from combustible materials. Never use the

appliance in rooms where petrol, solvents, paints or

any other substance that gives off combustible gases,

are kept, or near curtains or other drapery.

• Keep the appliance out of the reach of children and

animals.

• Only use the appliance with a power supply that com-

plies with the frequency and voltage requirements

specified on the rating plate.

• Use only three wire extension power cables with

ground wire and adequate lengths.

• Unplug the appliance from the outlet when not in use.

• The appliance should never be positioned directly

under outlets.

• Should the appliance be left temporarily in insecure

conditions, make sure that it cannot be used and

that the plug is disconnected.

• Do not use this heating device near washbasins,

bathtubs, showers or swimming pools.

• Before beginning any kind of maintenance or re-

pairs on the appliance make sure the plug is defi-

nitely disconnected from the outlet.

• Do not cover the appliance; it could cause

over-heating.

UNPACKING

• Remove all the material used to pack the appliance

for transportation.

• Remove all the objects from the box.

• If the heater looks damaged, immediately inform

the retailer where the appliance was bought.

FUNCTIONING

m Read the instructions in the safety infor-

mation section thoroughly. The instructions

must be followed carefully in order for the

heater to function safely.

Make sure the electric cable is not damaged in any

way. If the electric cable is damaged it must be imme-

diately replaced by the manufacturer, by the Service

Center or by specialized personnel only. Make sure

that the electrical characteristics of the outlet corre-

spond to the requirements stated in the instruction

booklet and/or on the rating plate found on the appli-

ance. Place the appliance in an upright position.

TURNING ON THE HEATER

Plug the electric cable into the outlet. Rotate the knob

to the required position:

1. Fan only 2. Minimum 3. Maximum

SWITCHING OFF THE HEATER

Let the fan run for 3 minutes before turning the heater

off. Rotate the knob to the “0” position.

REGULATING THE THERMOSTAT

By rotating the knob that controls the thermostat, you

can regulate the room temperature.

When the desired temperature is reached the thermo-

stat automatically switches the resistance off but the

fan continues working.

Operating Manual – Electric hot air generator

EN 2

MANUAL RESETTING

The appliance comes with a built

in security device that goes off au-

tomatically if the appliance should

happen to overheat.

If the security device should go off,

let the appliance cool down before looking for the

cause of the problem. Push the “RESET” button with a

small push rod to reset the appliance.

Should the problem persist, contact the Service Centre.

PERIODIC STORAGE AND CONTROL

If the appliance is not used for a long period of time, it

should be cleaned before being put away. Store it in a

dry place and protect it from dust. When the appliance

is used again check to make sure that the electric

cable is not damaged. Should you have any doubts as

to the conditions of the appliance please contact the

Service Center.

The appliance should be checked at least once a year.

Only qualified personnel authorized by the manufac-

turer must carry out all repairs.

TECHNICAL DATA

Capacity ...........................4,5-9 kW

Absorbed current ........................13 A

Voltage ......................... 400~V/50Hz

Air displacement.................... 708 m3/h

Thermostat range .....................0-40 °C

Size (mm) ...................... 290x360x520

Weight ..............................9,3 kg

SINGLING OUT PROBLEMS

PROBLEM: CAUSE: SOLUTION:

The appliance works Resistance is burnt out Replace

but does not heat. Thermostat control is broken Replace

The appliance does Security device was set off Push “RESET”

not switch on. Faulty motor Replace

Power supply interrupted Unplug the appliance and check connection.

Limited air ﬂow Air duct obstructed Clear the passage

Faulty motor Replace

RESET

Trotec GmbH & Co. KG

Grebbener Str. 7

D-52525 Heinsberg

+49 2452 962-400

+49 2452 962-200

info@trotec.com

www.trotec.com

Popular Heater manuals by other brands

oventrop

oventrop Regucor Series quick start guide

Blaze King

Blaze King CLARITY CL2118.IPI.1 Operation & installation manual

ELMEKO

ELMEKO ML 150 Installation and operating manual

BN Thermic

BN Thermic 830T instructions

KING

KING K Series Installation, operation & maintenance instructions

Empire Comfort Systems

Empire Comfort Systems RH-50-5 Installation instructions and owner's manual

Well Straler

Well Straler RC-16B user guide

EUROM

EUROM 333299 instruction manual

Heylo

Heylo K 170 operating instructions

Eterna

Eterna TR70W installation instructions

Clarke

Clarke GRH15 Operation & maintenance instructions

IRSAP

IRSAP The Radiator Company Ovali Fitting instructions

Empire Heating Systems

Empire Heating Systems WCC65 Installation and owner's instructions

Wetekom

Wetekom 92 86 43 Original instructions

Desa

Desa SPC170-F owner's manual

Watlow

Watlow Watrod Electric Tubular Heaters Specifications

Haverland

Haverland ECO-DRY GPS Series Instruction & installation manual

Stelpro

Stelpro ASILVC2060 Series user guide