Trotec SP1500 User manual
SP1500 Operation Manual
2 / 53 8018_SP1500 V2.2_EN (03/2018)
Copyright© by Trotec Laser GmbH
All rights reserved.
Anyone who reproduces, copies or distributes this document, or parts of it, without the approval
of Trotec Laser GmbH is subject to prosecution.
We do not assume liability for any errors contained in this documentation.
We reserve the right to make technical changes.
Trotec Laser GmbH
Linzer Strasse 156,
A-4600 Wels, OÖ.
AUSTRIA
Tel.: +43-(0)7242-239-0
Fax: +43-(0)7242-239-7380
trotec@troteclaser.com
www.troteclaser.com
3 / 53 8018_SP1500 V2.2_EN (03/2018)
Table of Contents
1 Manufacturing label........................................................................................................5
2 Product Components .....................................................................................................6
3 Preface.............................................................................................................................7
3.1 General .................................................................................................................................7
3.2 Product Tracking ...................................................................................................................8
4 Technical Data ................................................................................................................9
4.1 General Description...............................................................................................................9
4.2 Intended Use.........................................................................................................................9
4.3 Dimensions..........................................................................................................................10
4.4 Mechanical Design..............................................................................................................11
4.5 Control System....................................................................................................................11
4.6 Laser Tubes ........................................................................................................................11
4.7 Laser Safety........................................................................................................................12
4.8 Ambient Conditions .............................................................................................................12
4.9 Options................................................................................................................................12
4.10 Electrical Connection.........................................................................................................13
4.10.1 Electrical connection for laser system .........................................................................13
4.10.2 Electrical connection for water cooling (option) ...........................................................13
4.11 Materials............................................................................................................................14
5 Safety.............................................................................................................................15
5.1 Safety Instructions...............................................................................................................15
1.1 Intended user group.........................................................................................................15
1.2 Operating instructions / Safety equipment........................................................................15
5.2 General Safety Instructions .................................................................................................16
2.1 General............................................................................................................................16
2.2 Laser................................................................................................................................19
2.3 Transport .........................................................................................................................20
5.3 Secondary Risks .................................................................................................................21
3.1 General............................................................................................................................21
3.2 Crushing hazard...............................................................................................................21
5.4 Signage...............................................................................................................................22
6 Transport - Storage - Setup .........................................................................................24
6.1 Forklift transport ..................................................................................................................24
6.2 Shipping conditions .............................................................................................................26
6.3 Unloading, inspection and damage reporting.......................................................................26
6.4 Storage conditions...............................................................................................................26
6.5 Storage Location.................................................................................................................26
6.6 Installation Site....................................................................................................................27
6.7 Space Requirements...........................................................................................................27
6.8 Necessary Feed Lines.........................................................................................................27
6.9 Setup...................................................................................................................................28
6.10 Connections ......................................................................................................................29
6.10.1 Cooling System...........................................................................................................30
7 Machine view.................................................................................................................31
8 Operation.......................................................................................................................32
8.1 Key pad –Overview ............................................................................................................32
4 / 53 8018_SP1500 V2.2_EN (03/2018)
8.2 Key pad –Description .........................................................................................................33
8.3 Workpiece Removal Door....................................................................................................36
8.4 Tables .................................................................................................................................37
8.4.1 Cutting Table (Standard Table).....................................................................................37
8.4.2 Vacuum Table...............................................................................................................37
8.5 Operation ............................................................................................................................38
8.6 Changing the lens................................................................................................................39
9 Maintenance..................................................................................................................44
9.1 Cleaning optics on the Laser Head......................................................................................44
9.2 Cleaning the Mirrors............................................................................................................45
9.3 Cleaning the Exhaust hose connector .................................................................................46
9.4 Maintenance plan................................................................................................................47
10 Appendix .....................................................................................................................48
10.1 EU –Declaration of conformity..........................................................................................48
10.2 Acceptance report .............................................................................................................49
10.3 Acceptance report .............................................................................................................50
10.4 Response Form.................................................................................................................51
10.5 How to create a Service File..............................................................................................52
5 / 53 8018_SP1500 V2.2_EN (03/2018)
1 Manufacturing label
You find the manufacturing label with the CE-sign on the back side of the machine.
Enter the serial number, model and year of manufacture from the manufacturing label here.
This information is important for troubleshooting problems with the product and for ordering
replacement parts.
6 / 53 8018_SP1500 V2.2_EN (03/2018)
2 Product Components
Lenses 2.5“ / 5“
(7.5“ optional)
RS232-cable (TroCAM / i-Cut)
(7.5“ optional)
7 / 53 8018_SP1500 V2.2_EN (03/2018)
3 Preface
3.1 General
This operating manual is intended to simplify the following for you:
Learning about the machine, and
Utilizing the machine’s capabilities according to its
intended use.
The operating manual contains important notes on how to operate
the machine:
Safely,
Properly, and
Economically
Following the operating instructions helps you to:
Avoid hazards and risks,
Minimize repair costs and downtimes, and
Increase the reliability and service life of your machine.
8 / 53 8018_SP1500 V2.2_EN (03/2018)
3.2 Product Tracking
We have a legal duty to track our products after delivery to our
customers.
In particular, this relates to:
Recurring faults in functions
Anything that is unclear, e.g. in operation, maintenance
or instructions
Any accidents that occur
Other unusual observations
Recommendations for improvement, requests
This information serves as a basis for potential corrections and/or
changes to the product, and it is therefore of great interest to us.
We request that you inform us of any such events and offer us
your recommendations. This is the only way that we can improve
our products as necessary, and to make them as safe and reliable
as possible.
9 / 53 8018_SP1500 V2.2_EN (03/2018)
4 Technical Data
4.1 General Description
All electronic components are integrated in the machine.
All necessary connections are made on the back side of the SP1500.
Controls for the SP1500 are located on the keypad.
The SP1500 is equipped with an interlock safety system. When
the interlock is activated, only setup tasks can be performed on the
SP1500.
The machine has a manual table changing system that enables use of the
optimal table for specific jobs.
4.2 Intended Use
The Trotec SP1500 is designed for engraving and cutting of the
materials listed in this document.
10 / 53 8018_SP1500 V2.2_EN (03/2018)
4.3 Dimensions
Weight –depends on product model ............... 1200 - 1300kg
(2646 - 2867 lbs)
Item
Description
Dimension
Units
A
Length
2829 (112)
mm (inch)
B
Width
2197 (87)
mm (inch)
C
Height, closed
1293 (51)
mm (inch)
D
Height, open
1950 (77)
mm (inch)
C
D
B
A
Table of contents
Other Trotec Cutter manuals
Trotec
Trotec Speedy 500 User manual
Trotec
Trotec SP2000 User manual
Trotec
Trotec Q500 User manual
Trotec
Trotec SP500 User manual
Trotec
Trotec Speedy 500 User manual
Trotec
Trotec Rayjet 300 User manual
Trotec
Trotec SP2000 User manual
Trotec
Trotec SpeedMarker 300 User manual
Trotec
Trotec Q400 User manual
Trotec
Trotec SpeedMaker 300 User manual
Popular Cutter manuals by other brands
Milwaukee
Milwaukee HEAVY DUTY M12 FCOT Original instructions
Makita
Makita DCS552 instruction manual
SignWarehouse.com
SignWarehouse.com Bobcat BA-60 user manual
Makita
Makita 4112HS instruction manual
GEISMAR STUMEC
GEISMAR STUMEC MTZ 350S manual
Hitachi
Hitachi CM 4SB2 Safety instructions and instruction manual
