TroposAir 3LA44 User manual

The L.A.

6.0 KGS.

13.2 LBS.

Net weight

Owner’s Manual

WARNING : Read and follow these instructions carefully and be mindful of all warnings shown throughout.

3110124

3LA44

Toll Free: 1-855-676-7247

This instruction contains 6 pages:

Page 1: Foreword

Page 2: Unpack and inspect parts contained

Page 3:

Page 4:

Hanging system installation

Wire connection and Canopy installation

Page 4~5: Blade installation

Page 6: Remote

WARNING : TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK, OR INJURY

TO PERSONS, PLEASE OBSERVE THE FOLLOWING :

READ AND SAVE THESE INSTRUCTIONS

1]. To ensure the success of the installation, be sure to read the instructions and review the

diagrams thoroughly before beginning.

2]. To avoid possible electric shock, be sure electricity is TURNED OFF at the main power

box before wiring. All electrical connections must be made in accordance with local

codes, ordinances and/or the National Electric Code. If you are unfamiliar with the

methods of installing electrical wiring and products, secure the services of a qualified

and licensed electrician as well as someone who can check the strength of the

supportive ceiling members and make the proper installations and connections.

3]. Make sure that your installation site will not allow rotating fan blades to come in contact

with any object. BLADE SHOULD BE AT LEAST 7 FEET FROM FLOOR WHEN FAN IS IN

OPERATION.

4]. If possible, mount ceiling fan on a ceiling joist - the joist must be able to support the

motion and weight of the moving fan. If the fan will be mounted on a ceiling outlet box, a

4" x 2-1/8" deep METAL octagon box is required ; one UL listed as " suitable for fan

support ". The box and its supporting members must not be able to twist or work loose.

DO NOT USE PLASTIC BOXES. Installation on a concrete ceiling should be performed

by qualified personnel.

5]. Blades should be attached after motor housing is hung and in place. Fan motor housing

should be kept in carton until ready to be installed to protect its finish. If you are

installing more than one ceiling fan, make sure that you do not mix fan blade sets.

6]. After making electrical connections, spliced conductors should be turned upward. The

wires should be spread apart with the grounded conductor and the equipment-grounding

conductor on one side and the "HOT" wires on the other side.

7]. After fan is completely installed, check to make sure that all connections are secure to

prevent fan from falling and/or causing damage or injury.

8].

9].

10].

This fan is suitable for slope ceiling.

This fan is light kit adaptable.

This fan is suitable for indoor location use.

Unpack and inspect fan carefully to be certain

all contents are included.

Mounting Bracket

Canopy

Downrod

Yoke cover

Blade

Fan Assembly

Flat Washer x2

Spring Washer x2

Machine Screw x2 Wood Screw x2

For Mounting Bracket:

For Wire Connection:

WireNutx3

Hardware Bag

For Blade Installation:

Blade Screw x 13 (one spare screw included)

Wires

Hardware Bag

Wood Screw x2

Remote *Battery Included

OFF OFF OFF

Turn off power at breaker

box to avoid possible

electrical shock.

Use metal outlet box suitable

for fan support.

Outlet box must support 35 lbs min.

WARNING: blades should be at least 7 feet from floor

CAUTION:

Do not fold blades with heavy

pressure from two sides.

It may cause blades to crack.

Note 1: Note 2: Note 3:

1A.Installing mounting bracket to ceiling outlet box

1. HANGING SYSTEM INSTALLATION

1C. Hanging the fan

Rotate fan so that the groove on the ball engages

the ridge in the mounting bracket.

Lift fan assembly onto mounting bracket.

Mounting

Bracket

Cross Pin

Cotter Pin

Fan Assembly

Blade

Canopy

Yoke cover

Downrod

Outlet Box

Mounting

Bracket

Mounting

Bracket

Ridge

Ball Groove

1B. Downrod and YokeInstalling

Remove cross pin and cotter pin from downrod.

Insert downrod through canopy and yoke cover, and feed motor lead wires through downrod.

Loosen 2 downrod jam screws at yoke. Insert downrod assembly into yoke.

Insert the cross pin through yoke & downrod and secure with cotter pin.

Tighten both downrod jam screws to further secure downrod.

Pull down the yoke cover to cover yoke.

Wires

Yoke

Yoke cover

Cross Pin

Yoke

Cotter Pin

Downrod Jam

Screw(2)

(Tightening)

Downrod

Assembly

Downrod Jam

Screw(2)

( ing)

Loosen

Install mounting bracket to outlet box in ceiling by using screws included with the outlet box and

washers from the hardware bag.

2. WIRE CONNECTION

Follow diagram below and make sure that all exposed wires are secured inside wire nuts or terminal block.

Note : Wires from house may vary in color and may not include ground wire ( green ).

From House

White

Black

From Fan

White

Black

(AC-N)

(AC-L)

(MOTOR-N)

(MOTOR-L)

Green

( from downrod )

( from mounting bracket )

( for ground wire )

Push up canopy until two screws pre-screwed on mounting bracket are engaged with two key holes

on canopy.

Rotate canopy slightly until two pre-installed screw heads are engaged in the narrow end of key holes.

Tighten both screws.

Key Hole (2)

Canopy

Screw (2)

*White wire from house to white wire from fan

*Black wire from house to black wire from fan

*Ground wire from house to green wire from downrod and from mounting bracket

*Secure with twist - lock wire nuts. (Included)

After wiring is completed, gently push wires into junction box with wire nuts pointing upward.

3. CANOPY INSTALLATION

Note: Two screws are pre-installed on mounting bracket for canopy installation.

Making electrical wire connection

Wire Form House

Outlet Box

4. BLADES INSTALLATION

NOTE 2:

There may be two pieces of protection membrane on

two sides of blade for protecting blade from scratches.

Remove a part of the protection membrane on both

sides of blade end with "This side up" label for Step 4B.

Membrane

This side up

NOTE 1:

Please make sure blades are positioned with

"This side up" label facing the ceiling for step 4A.

This side up

(*Only clear blades have protection membrane.)

4A.

Blade end with "This side up" label should be attached

to the TOP side of fan motor (facing toward ceiling).

Make sure embossed spot on motor is properly

aligned with positioning hole on blade.

4B.

Once aligned, fasten the blade end onto TOP side

of fan motor with blade screws from hardware bag.

Blade

Fan Assembly

Blade Screw

Blade

Embossed Spot

Positioning Hole

4C.

If present, remove a part of the protection membrane

on both sides of the other blade end, and attach the

blade end onto DOWN side of fan motor with blade

screws and flat washers from hardware bag.

4D.

After repeating steps 4A to 4C twice until all

three blades are done, remove the protection

membrane from both sides of all three blades.

Membrane

Turn on power at breaker box for remote setting.

This side up

CAUTION: To avoid possible noise, do not fully

tighten the first blade screw while positioning.

Fasten both blade screws evenly after both

screws are in place.

5:REMOTE INSTALLATION

Remove battery cover.

FAN code setting:

There are 4 switches for 16 possible code combinations just in case your house has other fans installed

with the same codes. You may change your code switches by using a small screwdriver or ball point pen

to slide each code switch firmly up or down.

Note:IFONLYONEFANTOBEINSTALLEDINTHEHOUSE,YOUCANSKIPTHISSTEP.

LIGHT On/Off-Dimming :

This switch is to interchange light function while using bulbs (Dimming) or CFL bulbs (On/Off).

* function: Slide the code to “D” position (for bulbs)

* function: Slide the code to “ON” position (for CFL bulbs)

Install 12V 23AE battery x 1 pc.

code setting

incandescent

incandescentDimming

On/Off

5A. Initial Settings (Back side of Transmitter)

1. Code setting on TRANSMITTER.

ON ECE

DON

412V 23AE Battery x 1 pc

Pressing the button for 3~5 seconds till the fan ,

which means this remote control is doing the setting. Fan will operate clockwise for 2.5 minutes

and anti-clockwise for 2.5 minutes, then stop automatically. (Totally 5 minutes for SETTING.)

“SET” operates

5B. SETTING before starting fan.

5C. TRANSMITTER BUTTON

Your fan is ready for operation.

Light switch (two options)

1. On/Off (for CFL bulbs)

2. Dimming (for incandescent bulbs)

Fan ON/OFF switch:

Reversing function

The picture is showing

for CFL bulbs.

VII

III IV

SET

(Lowest Speed) (Highest Speed)

6 speeds from (Lowest Speed)

to (Highest Speed).

Table of contents

Other TroposAir Fan manuals

TroposAir

TroposAir Vogue User manual

TroposAir

TroposAir Duet User manual

TroposAir

TroposAir 5SR56+LK User manual

TroposAir

TroposAir Fresco 4BE52 User manual

TroposAir

TroposAir 5DA52 User manual

TroposAir

TroposAir 59DFG-L User manual

TroposAir

TroposAir Quantum 4UFOD52+LK+C User manual

TroposAir

TroposAir Liberator User manual

TroposAir

TroposAir Solara User manual

TroposAir

TroposAir 5OD52 User manual

TroposAir

TroposAir 5DA52 User manual

TroposAir

TroposAir 5HA52 User manual

TroposAir

TroposAir Northstar 60DFF-L User manual

TroposAir

TroposAir Triton II User manual

TroposAir

TroposAir Starfire 56DFH-L User manual

TroposAir

TroposAir Enterprise III User manual

TroposAir

TroposAir Estero 52DFN-L User manual

TroposAir

TroposAir Voyage 4VO40 User manual

TroposAir

TroposAir Ninja User manual

TroposAir

TroposAir Tuscan HE-15073 User manual

TroposAir

TroposAir Ion 3VG76 User manual

TroposAir

TroposAir Captiva User manual

Popular Fan manuals by other brands

ELTA FANS

ELTA FANS H03VV-F installation guide

Hunter

Hunter 20714 Owner's guide and installation manual

Emerson

Emerson CARRERA VERANDA CF542ORB00 owner's manual

Hunter

Hunter Caraway Owner's guide and installation manual

Panasonic

Panasonic FV-15NLFS1 Service manual

Kompernass

Kompernass KH 1150 operating instructions

VES

VES FALA100/12V/TR Original instructions

Vertiv

Vertiv Liebert DCD user manual

Westinghouse

Westinghouse GFP Series owner's manual

Venmar

Venmar KUBIX HRV PLUS Series user guide

Maico

Maico ECR 31 installation instructions

Sonnenkonig

Sonnenkonig Dinky instruction manual

S&P

S&P ECOWATT HXBR manual

Wider

Wider IMP03369BH instruction manual

Panasonic

Panasonic F-60DHN Operating and installation instructions

Hinkley

Hinkley HIGHLAND instruction manual

Broan

Broan 766BN installation guide

Premium

Premium PFS16022 Use manual