TRNDlabs Franklin User manual
vvvvvvvv
Franklin Wireless Headphones
Charging
Package Content
Foldable
Thank you for purchasing Franklin Wireless Headphones and welcome to the world of
TRNDlabs products.
Franklin is an elegant foldable wireless pair of headphones which gives you the freedom to take
your music everywhere you go.
The foldable design gives you the
ulmate packing privilege while you
are on the run.
While listening to music, Franklin
noes you of incoming calls which
you can pick up on the go supported by
Franklin’s build-in microphone.
The baery of Franklin lasts at least
175 hours in standby mode and
16 hours with non-stop play.
Franklin connects via bluetooth to your
mobile device to give you the ulmate
wireless headphones experience.
Make Calls Bluetooth
Franklin
Headphones
Charging
USB Cable
Carry Bag
1
2
3
4
Standby
1 To charge your Franklin, plug the charging
cable into the USB port of your Franklin.
2Plug the other end into a USB charging
port of your power source or computer.
3The red LED-light will indicate that your
Franklin is charging.
4When your Franklin is fully charged,
the red LED-light will turn o.
Headphones Funcon
1 Blue LED-light indicang acvity.
2 Mul-Funconal Wheel.
3USB Charging port.
4 Red LED-light indicang charging.
5Built-in Microphone.
Pairing with Bluetooth Device
1 Press the Mul-Funconal Wheel’s centre
posion for 5 seconds. The blue LED-light
indicang acvity will start to blink.
2Enable bluetooth on your device and
select scan/search for devices.
3Select ‘Franklin’ in the list of devices.
4Your device will now connect with
your Franklin.
5 Aer successfully pairing your devices,
the blue LED-light indicang acvity will
start to blink every 2 seconds.
1
2
3
45
Operaon Instrucons
Volume + / Next
Volume - / Previous
Power ON
Power OFF
Play / Pause
Answer Calls
End Calls
Reject Calls
Frequency Range: 20 Hz - 20 kHz
Impedance: 32 Ω
Bluetooth: V4.0 EDR, CSR, A2DP
Operang Distance: 10 meter
Charging Time: 2 - 3 hours
Play Time: 6 - 8 hours
Standby Time: 150 hours
5
6
7
6
Troubleshoong
No power: Ensure your Franklin is
charged and has enough power for use.
Please note that your Franklin works while
charging as well.
No sound: Ensure your Franklin is on.
Ensure your Bluetooth device is on. If the
volume of the Franklin is too low, adjust
the volume to an appropriate level.
Unable to connect: Turn o your Franklin
and turn it back on. Your Franklin will
go into pairing mode. Select ‘Franklin’
from the list on your Bluetooth device to
reconnect.
Poor sound quality: Ensure placing your
Franklin and your Bluetooth device in a
range of 3.3 (10 meter) sensing distance.
Accordingly, be sure to check that there
are no barriers that would block the signal.
• Do not expose your Franklin to extremely high or low temperatures.
• Do not leave your Franklin in direct sunlight for extended periods of me.
• Do not leave your Franklin near open ames such as cooking burners, candles, or replaces.
• Do not block any openings which serve as a venlaon funcon.
• Do not dispose your Franklin to re. The baery could explode causing fatal injuries.
• Charge the baery exclusively in accordance with the user manual instrucons provided with
your Franklin product package.
• not aempt to disassemble the Franklin’s charger or force open the built-in baery because
this may result in an electric shock.
• Do not clean your Franklin while it is being charged. Always unplug the charger rst before
cleaning your Franklin.
• Do not store your Franklin or any of its accessories near or over your automobile’s airbag
because serious injury may result in case of airbags deployment.
This product (including any accessories included in the original packaging) as supplied and
distributed in new condion, is warranted by TRNDlabs to the original consumer purchaser,
against defects in material and workmanship (“Warranty”) as can be found on www.trndlabs.com.
Warranty
•Exposure to high volume sound levels and
excessive sound pressure may cause tempo-
rary or permanent damage to your hearing.
Although there is no single volume seng
that is appropriate for everyone, you should
always use your Franklin with the volume
set at moderate levels and avoid prolonged
exposure to high volume levels.
•Do not use abrasive cleaners to clean your
Franklin as that could cause scratches or
damage.
•Do not bring your Franklin into contact with
any sharp objects as that could cause scrat-
ches or damage.
•Do not insert anything into your Franklin
unless otherwise specied in the user
instrucons. Inserng foreign objects into
your Franklin might cause damage to the
internal components.
•Do not aempt to repair, modify, or disas-
semble your Franklin yourself, it does not
contain any user-serviceable components.
•Do not aempt to replace your Franklin’s
baery, it is built-in and is not changeable.
•Observe all signs and displays that require
an electrical device or RF radio product to
be switched o in designated areas.
•Turn o your Franklin prior to boarding an
aircra. Do not use your Franklin inside an
aircra unless other bluetooth devices are
allowed on the ight.
•Dispose of your Franklin and your Franklin’s
baery according to local regulaons. Do
not dispose the baery with regular house-
hold waste.
8
Fire and electric shock hazard
Baery/charger hazard
Automobile accident hazard
Cauon
Please read the safety informaon carefully to ensure your personal safety
and prevent property damage.
Specicaons
Other TRNDlabs Wireless Headphones manuals
