Trinity TBFZ-2701 User manual
OWNER’S MANUAL
TRINITY EXPANDABLE CLOSET ORGANIZER
Model # TBFZ-2701 / TBFPBR-2701
Important / Important / Importante
DOWNLOAD THE FREE APP | TÉLÉCHARGER L’APPLICATION GRATUITE | DESCARGUE LAAPLICACIÓN GRATUITA
Directives intelligentes
Instrucciones Inteligentes
FOR QUICK & EASY 3D ASSEMBLY INSTRUCTIONS
POUR DES DIRECTIVES D’ASSEMBLAGE 3D RAPIDES ET FACILES
PARA INSTRUCCIONES DE ENSAMBLAJE RÁPIDAS Y SENCILLAS EN 3D
Your TRINITY Expandable Closet Organizer should include the following parts. Please inspect box
contents to ensure you have received all components.
If you are missing any parts, need assistance with assembly or have questions, please contact TRINITY
Customer Service: 800.985.5506 or customerservice@trinityii.com. Parts can also be requested online
via “Contact Us” section at www.trinityii.com.
You will NOT need additional tools for assembly.
PARTS LIST
SMALL SHELF (8)
A
TOP SHELF (2)
B
BAMBOO BOARD (8)
C
HANGING
BRACKET (4)
D
E
SLIP SLEEVE
(80) + (2) extra
F
J
MIDDLE POLE (8)
KL
TOP POLE (8)
End Cap pre-installed
BOTTOM POLE (8)
Threaded Insert pre-installed
G
HANGING ROD (2)
CONNECTOR (16)LEVELER (8)
© 2021 TRINITY - 800.985.5506
1
HI
HANGING
SCREW (4)
ANTI-TIPPING
KIT (2)
M
ASSEMBLY INSTRUCTIONS
F
J
K
F
F (4) J (8) K (4)
STEP 1
STEP 2
H (4) A (1)
A (1)
Screw each LEVELER (K) into the bottom of
each BOTTOM POLE (F). Turn clock-wise to
screw in place.
Starting from the bottom of the BOTTOM
POLE (F), attach two pieces of black plastic
SLIP SLEEVES (J) on either side of the pole
in the desired groove. Slide the plastic SLIP
SLEEVES (J) down until they click into
position. Repeat for the other three poles.
Tip: Use the grooves on the pole as a guide
to ensure a level shelf height.
A
F
J
K
With the SMALL SHELF (A) on its side, slide
each of the BOTTOM POLES (F) through the
shelf collars.
Stand the unit upright and push down on
the SMALL SHELF (A). Using a rubber mallet
to lightly hammer the SMALL SHELF (A)
down over the collars is helpful but not
necessary.
Note: For stability, the lowest SMALL SHELF
(A) should be installed no higher than the
3rd indentation from the bottom of the
BOTTOM POLES (F).
F
F
F
© 2021 TRINITY - 800.985.5506 2
ASSEMBLY INSTRUCTIONS
E
L
F (2) A (1) J (8)
STEP 3
STEP 4
E (4) L (4)
Attaching black plastic SLIP SLEEVES (J) onto
the poles in the desired grooves, slide the 2nd
SMALL SHELF (A) from the top of the BOTTOM
POLES (F) onto the pairs of black plastic SLIP
SLEEVES (J).
Screw the CONNECTORS (L) into the top of
the BOTTOM POLES (F), connect the four
MIDDLE POLES (E) and the four BOTTOM
POLES (F) with the CONNECTORS (L).
© 2021 TRINITY - 800.985.5506
3
A
J
ASSEMBLY INSTRUCTIONS
B
D (4) J (16) L (4)
STEP 5
STEP 6
B (1) J (8)
J
Repeat STEP 3 for assembly of the 3rd
SMALL SHELF (A)
Screw the CONNECTORS (L) into the top
of the MIDDLE POLES (E), connect the
four TOP POLES (D) and the four
MIDDLE POLES (E) with the
CONNECTORS (L).
Repeat STEP 3 for assembly of the 4th
SMALL SHELF (A)
A
Repeat STEP 3 for assembly of the TOP
SHELF (B)
The first tower is ready. Repeat STEP 1
through STEP 6 to assemble the second
tower.
Note: For stability, the TOP SHELF (B)
should be installed no lower than the 3rd
indentation from the top.
A (2)
© 2021 TRINITY - 800.985.5506 4
DA
C
C
C
C
C
C
C
C
ASSEMBLY INSTRUCTIONS
F (2)
STEP 7
STEP 8
C (8)
I
Top: Hang the HANGING BRACKET (H) over the wire
strand in the middle of the TOP SHELF (B). Do the
same for the other side.
Bottom: Hang the HANGING BRACKET (H) over the lip
of SMALL SHELF (A). Do the same for the other side.
Fasten HANGING SCREW (I) through HANGING
BRACKET (H) to HANGING ROD (G). Do this for both
HANGING RODS (G).
Note: The organizer is able to fit closet widths
ranging from 56” to 78”. Please place towers in
position before expanding the HANGING ROD (G) and
attach to HANGING BRACKET (H) with HANGING
SCREW (I).
Place CLOSET ORGANIZER by the wall, drill 1
hole on each side of the wall at the same level
of TOP SHELF (B) where ANTI-TIPPING KIT (M)
is desired to be placed.
Fasten ANTI-TIPPING KIT (M) to the wall and
cable loop through TOP SHELF (B) as the image
shows, and close up the cable loop, connecting
CLOSET ORGANIZER to the wall via ANTI-
TIPPING KIT (M).
Place each BAMBOO BOARD (C) onto each
SMALL SHELF (A) as shown.
© 2021 TRINITY - 800.985.5506
5
G (2) H (4) I (4)
H
M (2)
G
SERVICE PARTS LIST –TBFPBR-2701 Bronze Color
Part Number Description Part Number Description
1) XBK-01-012-2543 Slip Sleeve 8) ONA-20-003-1313 Bamboo Board
2) PBR-04-006-2750 Top Pole 9) PBR-13-008-2700 Hanging Rod
3) ZSV-01-013-2523 Pole Connector 10) XBK-01-024-0627 Hanging Screw
4) PBR-04-007-2800 Middle Pole 11) PBR-02-010-0001 Hanging Bracket
5) PBR-03-007-1414 Small Shelf 12) PBR-03-024-1428 Top Shelf
6) PBR-04-008-2700 Bottom Pole 13) XSV-02-011-0007 Anti-tipping kit
7) XBK-98-003-2538 Feet Leveler
TRINITY Customer Service provides the following replacement parts:
5
2
10
1
4
6
7
3
8
11
12
9
© 2021 TRINITY - 800.985.5506 6
13
SERVICE PARTS LIST –TBFZ-2701 Chrome Color
TRINITY Customer Service provides the following replacement parts:
5
2
10
1
4
6
7
3
8
11
12
9
© 2021 TRINITY - 800.985.5506
7
13
Part Number Description Part Number Description
1) XBK-01-011-2543 Slip Sleeve 8) ONA-20-003-1313 Bamboo Board
2) ZSV-04-006-2750 Top Pole 9) ZSV-13-008-2700 Hanging Rod
3) ZSV-01-013-2523 Pole Connector 10) XBK-01-024-0627 Hanging Screw
4) ZSV-04-007-2800 Middle Pole 11) ZSV-02-010-0001 Hanging Bracket
5) ZSV-03-007-1414 Small Shelf 12) ZSV-03-024-1428 Top Shelf
6) ZSV-04-008-2700 Bottom Pole 13) XSV-02-011-0007 Anti-tipping kit
7) XBK-98-003-2538 Feet Leveler
1
This manual suits for next models
1
Table of contents
Other Trinity Organizer manuals
