Tribe JETSPOT4Z User manual
USER MANUAL
MANUALE UTENTE
EN - IT
SPOT MOVING-HEAD
JETSPOT4Z
All rights reserved by Music & Lights S.r.l. No part of this instruction manual may be
reproduced in any form or by any means for any commercial use.
In order to improve the quality of products, Music&Lights S.r.l. reserves the right to modify the
characteristics stated in this instruction manual at any time and without prior notice.
All revisions and updates are available in the ‘manuals’ section on site www.musiclights.it
REV.04-12/18
3
JETSPOT4Z
Packing content • JETSPOT4Z
• Power cable
• Mount bracket
• User manual
TABLE OF
CONTENTS
Safety
General instructionsGeneral instructions
Warnings and installation precautionsWarnings and installation precautions
1 Introduction
1. 1 Description1. 1 Description
1. 2 Technical specications1. 2 Technical specications
1. 3 Operating elements and connections1. 3 Operating elements and connections
2 Installation
2. 1 Mounting2. 1 Mounting
3 Functions and settings
3. 1 Operation3. 1 Operation
3. 2 Basic3. 2 Basic
3. 3 Menu structure3. 3 Menu structure
3. 4 Linking3. 4 Linking
3. 5 DMX address3. 5 DMX address
3. 6 DMX mode3. 6 DMX mode
3. 7 DMX addressing3. 7 DMX addressing
3. 8 DMX control3. 8 DMX control
3. 9 Colors and gobos3. 9 Colors and gobos
3. 10 Movement3. 10 Movement
3. 11 Screen3. 11 Screen
3. 12 Fan mode3. 12 Fan mode
3. 13 Temperature3. 13 Temperature
3. 14 Auto and Manual test3. 14 Auto and Manual test
3. 15 Reset3. 15 Reset
3. 16 Adjust3. 16 Adjust
3. 17 Factory Reload3. 17 Factory Reload
3. 18 Fixture info3. 18 Fixture info
3. 19 Master/Slave3. 19 Master/Slave
3. 20 Sequence3. 20 Sequence
3. 21 Mode Speed3. 21 Mode Speed
3. 22 Connection of the DMX line3. 22 Connection of the DMX line
3. 23 Construction of the DMX termination3. 23 Construction of the DMX termination
4 Maintenance
4. 1 Maintenance and cleaning the unit4. 1 Maintenance and cleaning the unit
4. 2 Fuse replacement4. 2 Fuse replacement
4. 3 Trouble shooting4. 3 Trouble shooting
2
2
3
3
6
8
9
9
10
12
12
12
12
14
17
19
19
19
19
20
20
20
21
21
21
21
22
23
23
24
24
25
JETSPOT4Z
4
WARNING! Before carrying out any operations with the unit, carefully read this instruction
manual and keep it with cure for future reference. It contains important information about
the installation, usage and maintenance of the unit.
SAFETY
General instruction
• The products referred to in this manual conform to the European Community Directives and are there-
fore marked with .
• The unit is supplied with hazardous network voltage (230V~). Leave servicing to skilled personnel only.
Never make any modications on the unit not described in this instruction manual, otherwise you will
risk an electric shock.
• Connection must be made to a power supply system tted with ecient earthing (Class I appliance ac-
cording to standard EN 60598-1). It is, moreover, recommended to protect the supply lines of the units
from indirect contact and/or shorting to earth by using appropriately sized residual current devices.
• The connection to the main network of electric distribution must be carried out by a qualied electrical
installer. Check that the main frequency and voltage correspond to those for which the unit is designed
as given on the electrical data label.
• This unit is not for home use, only professional applications.
• Never use the xture under the following conditions:
- in places wet;
- in places subject to vibrations or bumps;
- in places with an ambient temperature of over 45°C.
• Make certain that no inammable liquids, water or metal objects enter the xture.
• Do not dismantle or modify the xture.
• All work must always be carried out by qualied technical personnel. Contact the nearest sales point for
an inspection or contact the manufacturer directly.
• If the unit is to be put out of operation denitively, take it to a local recycling
plant for a disposal which is not harmful to the environment.
Warnings and installation precautions
• If this device will be operated in any way dierent to the one described in this manual, it may suer
damage and the guarantee becomes void. Furthermore, any other operation may lead to dangers like
short circuit, burns, electric shock, etc.
• Before starting any maintenance work or cleaning the projector, cut o power from the main supply.
• Always additionally secure the projector with the safety rope.When carrying out any work, always com-
ply scrupulously with all the regulations (particularly regarding safety) currently in force in the country
in which the xture’s being used.
• For inside use only. Not designed for outside use.
• The minimum distance between the xture and surrounding walls must be more than 50 cm and the
air vents at the housing must not be covered in any case.
• Install the xture in a well ventilated place.
• Keep any inammable material at a safe distance from the xture.
• The maximum temperature that can be reached on the external surface of the tting, in a thermally
steady state, is high. After power o, please cool down over 15 minutes.
• Shields, lenses or ultraviolet screens shall be changed if they have become damaged to such an extent
that their eectiveness is impaired.
• The lamp (LED) shall be changed if it has become damaged or thermally deformed.
• Never look directly at the light beam. Please note that fast changes in lighting, e. g. ashing light, may
trigger epileptic seizures in photosensitive persons or persons with epilepsy.
• This product was designed and built strictly for the use indicated in this documentation. Any other use,
not expressly indicated here, could compromise the good condition/operation of the product and/or
be a source of danger.
• We decline any liability deriving from improper use of the product.
5
JETSPOT4Z
- 1 - INTRODUCTION
1.1 DESCRIPTION
JETSPOT4Z is a 180 W 6.800 K LED spotlight designed to replace a 700 W discharge xture in theatres,
concert halls and a host of other venues. The compact size allows for the use of this luminaire in venues
with low ceilings without resorting to zoom. Its custom optical system delivers a consistent output with a
at-eld and crisp gobo projection right through the massive 8° to 40° zoom range.
1.2 TECHNICAL SPECIFICATIONS
LIGHT SOURCE
• Source: 180W high-power white LED
• CT: 6.800K
• CRI: 68
• Luminous ux: 7’518lm
• Lux: (8°) 25’200 lx - (40°) 3’250lx @3 m
• Lux: (8°) 2’268 lx - (40°) 292lx @10 m
• Source life expectancy: 50.000 h
OPTICS
• Zoom: 8 - 40° motorised linear zoom
• Lens type: high-quality glass lens optics
• Focus: motorised
COLOUR SYSTEM
• Colour mixing: CMY colour system on 3 gradually fading colour wheels
• CTC: on wheel 2500 K and 3200 K + CTB
• Colour wheel: 6 dichroic lters + open on 3 independent colour wheels
DYNAMIC EFFECTS
• Rotating gobos: 7 rotating gobos + open, interchangeable, indexing
• Gobo size: outer: 24,2 mm - image: 20 mm - thickness: 1,1 mm
• Fixed gobos: 8 xed gobos + open
• Circular prism: 3f with bi-directional rotation, indexing
• Frost: linear 0 - 100% frost lter
• Iris: 5 - 100% motorised linear iris
• Auto mode: built-in programs with execution speed adjustment
BODY
• Pan angle: 540°
• Tilt angle: 270°
• Pan/Tilt resolution: 8 / 16 bit
• Feedback: automatic repositioning after accidental movement
• Body: aluminium structure with hi-resistance polycarbonate cover
• Body colour: black
CONTROL
• Protocols: DMX512, RDM
JETSPOT4Z
6
• DMX channels: 23 / 25 / 27channel
• RDM: RDM ready for xture remote monitor and settings
• Display: black TFT high resolution display
• Firmware upgrade: yes, via USB - DMX interface (UPBOX1) not included
• Master/Slave: for synchronized operation of more units linked in a chain
ELECTRONICS
• Dimmer: linear 0 ~ 100% electronic dimmer
• Strobe / shutter: 1 - 30 Hz, electronic
• Battery backup: battery backup for user operation without connecting to the main power
• Operating temperature: -10° ~ +45°
• Flicker: icker free operation
ELECTRICAL
• Power supply: 100-240 V – 50/60 Hz
• Power consumption (at 230 V): 250W
• Power consumption (at 120 V): 252W
• Output (at 230 V): 14 units on a single power line
• Output (at 120 V): 8 units on a single power line
PHYSICAL
• Cooling: forced air with low noise fan
• Sospension and xing: any position with quick-lock omega brackets
• Pan / tilt lock: pan / tilt locking for transportation and maintenance
• Signal connection: Amphenol XLR 3p + 5p IN/OUT connectors
• Power connection: Neutrik powerCON IN/OUT connectors
• IP rating: 20
• Dimensions (WxHxD): 332x544x230mm
• Weight: 18,6kg
Fig.1Technical drawing
7
JETSPOT4Z
Fig.2
1.3 OPERATING ELEMENTS AND CONNECTIONS
1. MOVING HEAD
2. ROTARY ARM
3. CONTROL PANEL with TFT dis-
play and 4 button used to access
the control panel functions and
manage them.
4. LED INDICATOR
5. DMX OUT (5-pole XLR): 1 =
ground, 2 = DMX-, 3 = DMX+, 4
N/C, 5 N/C
6. DMX OUT ( 3-pole XLR): 1 =
ground, 2 = DMX -, 3 = DMX +
7. DMX IN (5-pole XLR): 1 = ground,
2 = DMX-, 3 = DMX+, 4 N/C, 5
N/C
8. DMX IN (3-pole XLR): 1 = ground,
2 = DMX -, 3 = DMX +
9. MAIN FUSE HOLDER: replace
a burnt-out fuse by one of the
same type only.
10.POWER OUT: (PowerCON OUT)
to connect multiple units in se-
ries.
11.POWER IN (PowerCON IN):
for connection to a socket
(100-240V~/50-60Hz) via the
supplied mains cable.
View A
View B
7
8
10 9
11
5
6
34
B
A
2
1
JETSPOT4Z
8
- 2 - INSTALLATION
2.1 MOUNTING
The JETSPOT4Z may be set up on a solid and even surface. By means of the xing facilities of the baseplate,
the unit can also be mounted upside down to a cross arm. The base plate is shown in g.3. For xing, stable
mounting clips are required. According to the gure, the bolts of the brackets are placed into the openings
provided in the base plate and turned clockwise until they lock (to the stop). Always ensure that the unit
is rmly xed to avoid vibration and slipping while operating. The mounting place must be of sucient
stability and be able to support a weight of 10 times of the unit’s weight. When carrying out any installa-
tion, always comply scrupulously with all the regulations (particularly regarding safety) currently in force
in the country in which the xture’s being used. Always additionally secure the projector with the safety
rope from falling down. For this purpose, fasten the safety rope at a suitable position so that the maximum
fall of the projector will be 20 cm.
Fig.3
SAFETY
CABLE
OMEGA
BRACKETS
9
JETSPOT4Z
- 3 - FUNCTIONS AND SETTINGS
3.1 OPERATION
Connect the supplied main cable to a socket (100-240V~/50-60Hz). The unit will run built-in program to
reset all motors to their home position. Shortly after that the JETSPOT4Z is ready for operation. To switch
o, disconnect the mains plug from the socket. For a more convenient operation it is recommended to
connect the unit to a socket which can be switched on and o via light switch.
3.2 BASIC
The control panel of JETSPOT4Z has a display and 4 buttons for the complete programming and manage-
ment of the projector menu (g.4).
Fig.4 - Functions of the buttons
UP DOWN MENU ENTER
Increases the value
displayed or passes to
the previous item in a
menu
Decreases the value
displayed or passes to
the next item in the
menu
To enter in the main
menù or to return to the
top level
Conrms the displayed
value, or activates the
displayed function, or
enters the successive
menu
JETSPOT4Z
10
3.3 MENU STRUCTURE
MENU
1
CONNECT ðDMX Address ðValue (1-512) Default: 1
DMX Mode ðBasic 27CH
Basic 25CH
Basic 23CH
Default: 25CH
Wireless ðReceive On/O
Receive Reset
Wireless To DMX ðYES/NO
Default :O
Default :No
Default :Yes
2SET UP ðMovement ðPan Reverse
Tilt Reverse
Pan Feedback
Tilt Feedback
ðYES/NO
Default: No
Default: No
Default: Yes
Default: Yes
Screen ðBacklight ðON
10s
20s
30s
Default: 10s
Flip Display ðNO/YES/AUTO Default: No
DMX Led ðOFF/ON Default: O
Warn Cue ðON/OFF Default: On
Key Lock ðYES/NO Default: No
Fixture ðFan mode ðAuto/High/Silent Default: Auto
Temperature unit ðC°/F° Default: °C
LED Frequency ð600Hz
1200 Hz
2000 Hz
4000 Hz
6000 Hz
25KHz
Default: 1200Hz
Auto Test ðAuto Test
Manual Test ðPan
Pan Fine
Tilt
Tilt Fine
P/T Speed
Dimmer
Shutter
Color1
Color2
Color3
Cyan
Magenta
Yellow
Gobo1
RGobo1
Gobo2
Prism Rot
Focus
Zoom
Frost
Iris
ðValue (000-255) for
each function
Default: Tilt=128
Dimmer=255
Shutter = 255
Table of contents
Languages:
Other Tribe Dj Equipment manuals
Tribe
Tribe SUNRISE2 User manual
Tribe
Tribe BATGOBOIR User manual
Tribe
Tribe JETSPOT1 User manual
Tribe
Tribe LUMIPAR12UH3P User manual
Tribe
Tribe Crystal User manual
Tribe
Tribe PIXROLL10UTRI User manual
Tribe
Tribe FLATPAR3H User manual
Tribe
Tribe FLATPAR6H User manual
Tribe
Tribe LUMIPIX9UHE User manual
Tribe
Tribe MINIVERSAPAR User manual
