TRENDnet TEW-411BRP User manual

User’s Guide

TEW-411BRP

Wireless 802.11g AP Router

User’s Manual

Version 1.4

User’s Guide

No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, whether electronic, mechanical,

photocopying, recording, or otherwise without the prior writing of the publisher.

July. 2003

User’s Guide

Contents

1. Introduction.............................................................................................................. 4

2. Safety Notification ................................................................................................... 5

3. Hardware Installation .............................................................................................. 6

4 Web Management Settings ...................................................................................... 7

4.1. Primary Setup…..

……………………………………………………………………………………….8

4.2. Security

…………………………………………………………………………………………………..13

4.3. System

……………………………………………………………………………………………………15

4.4. DHCP Server

…….……………………………………………………………………………………..18

4.5. SNMP Info

……………………………………………………………………………………………….20

4.6. Status

…………………………………………………………………………………………………….21

4.7. Advanced Wireless

…………………………………………………………………………………...23

4.8. Access Filters

…………………………………………………………………………………………..26

4.9. Virtual Server

…………..……………………………………………………………………………….29

4.10. Routing

Table

…………………………………………………………………………………………31

4.11. Dynamic DNS

……………….………………………………………………………………………..33

. Troubleshooting.................................................................................................... 34

User’s Guide

1. Introduction

Thank you for purchasing your AP Router Wireless 802.11g AP Router.

This user guide will assist you with the installation procedure.

The package you have received should contain the following items:

 AP Router Wireless 802.11g AP Router

 User Guide

 Power Supply / Cord

 Ethernet Cable

Note: if anything is missing, please contact your vendor

User’s Guide

2. Safety Notification

Your Wireless AP Router should be placed in a safe and secure location. To ensure proper operation,

please keep the unit away from water and other damaging elements. Please read the user manual

thoroughly before you install the device. The device should only be repaired by authorized and

qualified personnel.

 Please do not try to open or repair the device yourself.

 Do not place the device in a damp or humid location, i.e. a bathroom.

 The device should be placed in a sheltered and non-slip location within a temperature range of

+5 to +40 Celsius degree.

 Please do not expose the device to direct sunlight or other heat sources. The housing and

electronic components may be damaged by direct sunlight or heat sources.

User’s Guide

3. Hardware Installation

Front Panel

The front panel provides LED’s for device status. Refer to the following table for the meaning of each

feature.

LED STATUS Description

Off No power

Red On

1. Power on 2. Reset to default 3. Firmware upgrade (first 1

minute)

PWR/STAT

Red Blink

1. System up 2. Power on 3. Firmware upgrade

Off no Ethernet link detected

Green On

10/100Mbps Fast Ethernet link detected. No activity.

LAN

Green

Blink Indicates data traffic on the 10/100 Mbps LAN

WAN Orange

Blink Indicates data traffic on the 10/100 Mbps LAN

G Yellow

Blink

Indicates the device is linking or active data through wireless

links

Rear Panel

The rear panel features 4 LAN ports, 1 WAN port and Reset button. Refer to the following table for the

meaning of each feature.

Power (DC 5v)

Used to connect to the power outlet. Only use the power

adapter provided with the device. Use of an unauthorized

power adapter may cause damage to your device and

violate your warranty.

Reset

Press the Reset Button for approximately ten seconds, all

configurations will set to factory default settings.

LAN The RJ-

45 Ethernet ports used to connect your PC, hub,

switch or Ethernet network.

WAN The RJ-

45 Ethernet port labeled WAN is used to connect

your AP Router to your xDSL or Cable modem.

AP Router Default Settings

The default settings are shown following.

User

Password admin

AP Router IP

Address 192.168.1.1

AP Router Subnet

Mask 255.255.255.0

RF ESSID wlan-g

11g RF Channel 6

Mode 11b+11g

Encryption Disabled

DHCP client Enabled

User’s Guide

Web Management Settings

START UP & LOGIN

In order to configure the Wireless 11g AP Router, you must use your web browser and manually input

http://192.168.1.1 into the Address box and press Enter. The Main Page will appear.

In order to configure the Wireless 11g AP Router, you must input the password into the Password box

and leave blank on the User Name box. The default password is “admin”.

Once you have logged-in as administrator, it is a good idea to change the administrator password to

ensure a secure protection to the Wireless 11g AP Router. The Security Settings section described

later in this manual describes how to change the password.

Once you have input the correct password and logged-in, the screen will change to the Setup page

screen.

TURN ON POWER SUPPLY

Quick power cycle can caused system corruption. When power on, be careful not to shut down in

about 5 seconds, because data is writing to the flash.

User’s Guide

4.1. Primary Setup

Primary Setup

This screen contains all of the Router's basic setup functions.

Most users will be able to configure the AP Router and get it working properly using the settings on

this screen. Some Internet Service Providers (ISPs) will require that you enter AP Router Wireless

802.11g AP Router specific information, such as User Name, Password, IP Address, Default Gateway

Address, or DNS IP Address. This information can be obtained from your ISP, if required.

WAN:

MAKE CORRECT NETWORK SETTINGS OF YOUR COMPUTER

To change the configuration, use Internet Explorer (IE) or Netscape Communicator to

connect the

WEB management 192.168.1.1.

User’s Guide

Host Name: This entry is necessary for some ISPs and can be provided by them.

Domain Name: This entry is necessary for some ISPs and can be provided by them.

Configuration Type: The Router supports four connection types:

Dynamic IP Setting

Static IP Address

PPPoE (Point-to-Point Protocol over Ethernet)

PPTP (Point-to-Point Tunneling Protocol)

These types can be selected from the drop-down menu next to Internet Connection. The information

required and available features will differ depending on what kind of connection type you select.

Some descriptions of this information are included here:

Internet IP Address and Subnet Mask

This is the Router's IP Address and Subnet Mask as seen by external users on the

Internet (including your ISP). If your Internet connection requires a static IP address,

then your ISP will provide you with a Static IP Address and Subnet Mask.

• Default Gateway

Your ISP will provide you with the Gateway IP Address.

• DNS (Domain Name Server) IP Address

Your ISP will provide you with at least one DNS IP Address.

• User Name and Password

Enter the User Name and Password you use when logging onto your ISP through a

PPPoE or PPTP connection.

• Connect on Demand

You can configure the Router to disconnect your Internet connection after a specified

period of inactivity (Max Idle Time). If your Internet connection has been terminated due

to inactivity, Connect on Demand enables the Router to automatically re-establish your

connection as soon as you attempt to access the Internet again. If you wish to activate

Connect on Demand, click the radio button.

If you want your Internet connection to remain active at all times, enter 0 in the AP

Router 802.11g AP Router max Idle Time field. Otherwise, enter the number of minutes

you want to have elapsed before your Internet connection terminates.

• Keep Alive Option

This option keeps you connected to the Internet indefinitely, even when your connection

sits idle. To use this option, click the radio button next to Keep Alive. The default Redial

Other manuals for TEW-411BRP

Table of contents

Other TRENDnet Wireless Router manuals

TRENDnet

TRENDnet TEW-511BRP Instruction Manual

TRENDnet

TRENDnet TEW 632BRP - Wireless Router User manual

TRENDnet

TRENDnet EasyMesh TEW-832MDR User manual

TRENDnet

TRENDnet TEW-635BRM - Wireless Router User manual

TRENDnet

TRENDnet TEW-654TR - 300Mbps Wireless N Travel Router User manual

TRENDnet

TRENDnet TEW-650AP User manual

TRENDnet

TRENDnet N600 User manual

TRENDnet

TRENDnet TEW-435BRM - 54MBPS 802.11G Adsl Firewall M Instruction Manual

TRENDnet

TRENDnet TEW-751 DR User manual

TRENDnet

TRENDnet TEW-711BR User manual

TRENDnet

TRENDnet TEW-634GRU User manual

TRENDnet

TRENDnet TPL-111BR - WIRELESS POWERLINE ROUTER 125 Instruction Manual

TRENDnet

TRENDnet TEW-816DRM User manual

TRENDnet

TRENDnet TEW-435BRM - 54MBPS 802.11G Adsl Firewall M User manual

TRENDnet

TRENDnet TEW-691GR User manual

TRENDnet

TRENDnet TPL-111BR - WIRELESS POWERLINE ROUTER 125 User manual

TRENDnet

TRENDnet TEW-800MB User manual

TRENDnet

TRENDnet TPL-407E User manual

TRENDnet

TRENDnet TEW-692GR User manual

TRENDnet

TRENDnet TEW-635BRM - Wireless Router User manual

TRENDnet

TRENDnet TEW-656BRG User manual

TRENDnet

TRENDnet TEW-810DR User manual

TRENDnet

TRENDnet TEW-631BRP User manual

TRENDnet

TRENDnet TEW-654TR - 300Mbps Wireless N Travel Router User manual

Popular Wireless Router manuals by other brands

Milesight

Milesight UG67 user guide

Airlogic

Airlogic AirSync Class 1 Features

Samsung

Samsung WCH730B user manual

TELEFONICA

TELEFONICA USB Adapter quick start guide

NETGEAR

NETGEAR PowerLINE WiFi 1000 Series quick start

Askey

Askey RAC2V1K user manual

Alloy

Alloy WLF2454AP-S user guide

TP-Link

TP-Link TL-WR542G user guide

NETGEAR

NETGEAR WNR2000v4 user manual

Hama

Hama 53120 Operating instruction

Intellinet

Intellinet 524582 user manual

Asus

Asus RT-N10P user guide

D-Link

D-Link DIR-506L Quick installation guide

Sapido

Sapido GR297n user manual

Asus

Asus DSL-N55U user guide

AMTC

AMTC WR7502 user guide

Compaq

Compaq CP-2W - iPAQ Connection Point manual

SMC Networks

SMC Networks WBR14-N2 FICHE user guide