TRENDnet TEW-610APB Instruction Manual
F.A.Q’ s for TEW-610APB
Q: How do I configure the Access Point through the web-based configuration?
A: Open your web browser and type the IP address of the TEW-610APB in the
address bar. The default IP address is 192.168.0.100. At the login, enter your
username (admin) and password (admin).
Q: What is the default IP address of my Access Point?
A: The default IP address of the TEW-610APB is 192.168.0.100.
Q: How do I change the IP address of my TEW-610APB?
A:
1) Open your web browser and type the IP address of the TEW-610APB in the
address bar. The default IP address is 192.168.0.100. At the login, enter your
username (admin) and password (admin).
2) Click Admin on the left hand side.
01/16/06
3) Change the IP address to the desired IP address and click Save.
Q: What is the default username and password for the TEW-610APB?
A: The default username and password are both “admin”.
Q: How do I change the password and username on my TEW-610APB?
A:
1) Open your web browser and type the IP address of the TEW-610APB in the
address bar. The default IP address is 192.168.0.100. At the login, enter your
username (admin) and password (admin).
2) Click Admin on the left hand side.
3) Enter the new Username and/or Administrator Password. Click Save.
Q: What can I do if I forgot my password or want to reset back to factory defaults.
01/16/06
Locate the reset button on the back of the unit. Press and hold it in for approximately 15
seconds.
Q: How do I upgrade the firmware on my Access Point?
A:
DO NOT upgrade firmware on any TRENDnet product using a wireless connection.
Firmware upgrades over wireless connections may damage the product. Please perform firmware upgrades
with "wired" network connections only.
Click here to download the firmware. Save it to your desktop and extract it.
1) Open your web browser and type the IP address of the TEW-610APB in the
address bar. The default IP address is 192.168.0.100. At the login, enter your
username (admin) and password (admin).
2) Click Admin on the left hand side.
3) Click Browse next to the box under the Firmware Upgrade section. Locate and
select the firmware file that you previously downloaded and extracted.
01/16/06
4) Click Upgrade. It will take approximately 30 seconds to upgrade the firmware and
the access point to restart.
Do NOT interrupt the firmware update process. Doing so may damage the product.
Q: How do I enable encryption on my Access Point?
A:
1) Open your web browser and type the IP address of the TEW-610APB in the
address bar. The default IP address is 192.168.0.100. At the login, enter
your username (admin) and password (admin).
2) Click Security on the left hand side.
3) Choose your Authentication type and enter your key settings. Click Save.
Q: Where can I find the MAC address of my Access Point?
01/16/06
A:
1) Open your web browser and type the IP address of the TEW-610APB in the
address bar. The default IP address is 192.168.0.100. At the login, enter
your username (admin) and password (admin).
2) Click on the Status tab at the top of the page. It is located directly across
from LAN MAC:
Q: How do I configure my TEW-610APB in WDS mode?
The TEW-610APB uses WDS (Wireless Distribution System). The channel and SSID on
the remote Access Points must be the same as the TEW-610APB. The remote Access
Point must also support WDS.
Note: WPA encryption is not supported on WDS links.
01/16/06
1) Open your web browser and type the IP address of the TEW-610APB in the
address bar. The default IP address is 192.168.0.100. At the login, enter
your username (admin) and password (admin).
2) Click WDS on the left hand side.
3) Single click the Enable WDS check box to enable WDS.
4) Enter the remote Access Point’s MAC address into the AP MAC Address field
and click Save.
Q: How do I change the channel of my Access Point?
A:
01/16/06
1) Open your web browser and type the IP address of the TEW-610APB in the
address bar. The default IP address is 192.168.0.100. At the login, enter
your username (admin) and password (admin).
2) Click Wireless on the left hand side.
3) Choose a different channel from the drop down box next to the Channel field and
click Save.
Q: How do I change the SSID of my Access Point?
A:
1) Open your web browser and type the IP address of the TEW-610APB in the
address bar. The default IP address is 192.168.0.100. At the login, enter
your username (admin) and password (admin).
2) Click Wireless on the left hand side.
01/16/06
3) Enter in your desired SSID in the Wireless Network Name (SSID) field. Click
Save.
Q: How do I enable Super G mode on my access point?
A:
1) Open your web browser and type the IP address of the TEW-610APB in the
address bar. The default IP address is 192.168.0.100. At the login, enter
your username (admin) and password (admin).
2) Click Wireless on the left hand side.
01/16/06
3) Choose the Super G mode that you want to use next to the Super G field. Click
Save.
Note: Super G mode requires that you use channel 6. Super G mode with Static
Turbo requires that that the 802.11 mode is set to 802.11g only and that Adaptive
Radio Selection is disabled. The Adaptive Radio Selection is used with Super G
with Dynamic Turbo (AR enabled) mode.
01/16/06
Other manuals for TEW-610APB
5
Other TRENDnet Wireless Access Point manuals
TRENDnet
TRENDnet TEW-230APB User manual
TRENDnet
TRENDnet TEW-510APB Instruction Manual
TRENDnet
TRENDnet TEW-413APBO User manual
TRENDnet
TRENDnet TEW-210APB User manual
TRENDnet
TRENDnet TEW-410APB User manual
TRENDnet
TRENDnet TEW-636APB User manual
TRENDnet
TRENDnet TEW-753DAP User manual
TRENDnet
TRENDnet TEW-AP100plus User manual
TRENDnet
TRENDnet TEW-653AP User manual
TRENDnet
TRENDnet TEW-455APBO - 9dBi High Power Wireless Outdoor PoE Access... User manual
TRENDnet
TRENDnet TEW-434APB - 54Mbps Wireless G PoE Access... User manual
TRENDnet
TRENDnet TEW-450APB - Wireless Super G Access Point Installation guide
TRENDnet
TRENDnet TEW-455APBO - 9dBi High Power Wireless Outdoor PoE Access... User manual
TRENDnet
TRENDnet TEW-738APBO User manual
TRENDnet
TRENDnet TEW-821DAP User manual
TRENDnet
TRENDnet WAP-200A User manual
TRENDnet
TRENDnet TPL-410AP User manual
TRENDnet
TRENDnet TEW-430APB - Wireless Access Point User manual
TRENDnet
TRENDnet TEW-430APB - Wireless Access Point User manual
TRENDnet
TRENDnet TEW-AP100plus User manual
