TRENDnet NWay User manual
Aug/02 1 MNADM6509001
8-Port 10/100Mbps NWay Switch
User Manual
Ver. 1.00
All brand names and trademarks are properties of their respective owners.
Aug/02 2 MNADM6509001
Introduction
The 8-Port NWay Switch is designed to for the needs of small enterprise and home networks. Its easy
installation can boost network performance just in a couple of minutes. With its Auto-Negotiation capability, all
ports can be configured to its optimum speed of 10/20Mbps or 100/200Mbps automatically. It eliminates
bottlenecks and bandwidth constraints, optimizes network performance. Inevitably the 8-Port NWay Switch is
your best choose to improve network performance with the highest performance/price ratio.
Key Features
y10/100Mbps twisted-pair ports with Auto-negotiation.
yBridging capability for 100Mbps and 10Mbps segments.
yProvides Store-and-Forward Switching Architecture.
ySupports Auto MDI/MDI-X.
ySupports IEEE802.3x Flow-Control Full-Duplex operation.
ySupports Back-Pressure Flow-Control Half-Duplex operation.
y1M bits Packet Buffer.
y1K entries Address Table.
yEight RJ-45 Ports
yOne Uplink Port
Packing List
Thank you for purchasing of this Switch. The package should contain the following items:
yOne 8-Port Switch
yOne AC/DC Power Adapter
yOne User Manual
yFour rubber feet
If anything is missing, please contact your place of purchase.
Cabling
10Mbps
Category 3, 4, or 5 Twisted-Pair cable can be used for transmitting data at 10Mbps or 20Mbps bandwidth on
10BASE-T networks.
100Mbps
Only Category 5 Twisted-Pair cable can be used for transmitting data at 100Mbps or 200Mbps bandwidth on
100BASE-TX networks.
Aug/02 3 MNADM6509001
Networking
Connecting computers to Switch
1. Make sure all computers to be connected to the Switch have installed properly a network interface card.
2. Connect computer to the Switch with a twisted-pair cable. The cable should have RJ-45 plugs. Use
Category 5 cable for all connections. Please pay attention to the length of each cable should be less than
100 meters.
3. Plug one end of the cable to the RJ-45 port of the computer’s NIC. Plug the other end to any available port
on the Switch.
Up linking to other Switch
1. Prepare a straight-through Category 5 twisted-pair cable with RJ-45 plugs. Make sure the cable does not
longer than 100 meters.
2. Connect one end of the cable to the Switch’s Uplink port.
3. Connect the other end of the cable to the other Switch’s MDI-X port (in our Switch, Port 1 to Port 8 are
MDI-X ports).
Alternatively, you can connect two Switches at both ends MDI-X ports with a crossover cable.
Please note that the UPLINK Port shares with Port 8. Only either of them can be used at a time, not both.
Status LEDs
LED Color State Indication
POWER Amber On Power is ON
SPEED Green On
Off
Connection at 100Mbps
Connection at 10Mbps
LINK/ACT Green On
Off
Flash
Valid Network Connection
No Network Connection
Sending/Receiving Data
FDX Green On
Off
Full-Duplex Mode
Half-Duplex Mode
Aug/02 4 MNADM6509001
Specifications
Model 8-Port 10/100Mbps NWay Switch
Access Method CSMA/CD
Standards IEEE802.3u 100BASE-TX
IEEE802.3 10BASE-T
Media Support 10BASE-T 100-Ohm Cat. 3, 4, 5 twisted-pair
100BASE-T 100-Ohm Cat. 5 twisted-pair
Ports 8 RJ-45 + 1 Uplink Port
Bandwidth 100BASE-TX: 200/100Mbps via Auto-Negotiation
10BASE-T: 20/10Mbps via Auto-Negotiation
Switching Method Store-And-Forward
Filtering/Forwarding Rate 100Mbps: 148800 packets/second
10Mbps: 14880 packets/second
Flow Control Full Duplex – IEEE802.3x
Half Duplex – Back Pressure
MAC Entry 1K entries
Packet Buffer 1M bits per system
Power Requirement DC 6V/1A
Operating Temperature 0 to 45 degree C
Storage Temperature -20 to 70 degree C
Humidity 10% to 90% non-condensing
Status LEDs Port: 3 (SPEED, LINK/ACT, FDX)
System: 1 (POWER)
Dimensions 161 x 84 x 26 mm
Certification FCC Class A, CE Mark
Table of contents
Other TRENDnet Switch manuals
TRENDnet
TRENDnet TEG-S4000 User manual
TRENDnet
TRENDnet TE100-S810Fi - Switch User manual
TRENDnet
TRENDnet TEG-S16Dg User manual
TRENDnet
TRENDnet TK-408K Parts list manual
TRENDnet
TRENDnet TE100-S2424V User manual
TRENDnet
TRENDnet TK-210K User manual
TRENDnet
TRENDnet TPE-30284 User manual
TRENDnet
TRENDnet TK-207K - KVM Switch - USB Quick start guide
TRENDnet
TRENDnet TEG-524WS User manual
TRENDnet
TRENDnet TEG-2224WS User manual
TRENDnet
TRENDnet TK-214i User manual
TRENDnet
TRENDnet TK-200K Manual
TRENDnet
TRENDnet TI-PG1284i User manual
TRENDnet
TRENDnet TK-204K User manual
TRENDnet
TRENDnet TFC-1600MM User manual
TRENDnet
TRENDnet TEG-S80Dg User manual
TRENDnet
TRENDnet TEG-082WS User manual
TRENDnet
TRENDnet TE100-DX24Rplus User manual
TRENDnet
TRENDnet TPE-30102WS User manual
TRENDnet
TRENDnet TPE-TG44G User manual
