Download and install the latest rmware updates, change the module
settings, and gain access to additional functions using the Traxxas Link App
(available in the Apple App StoreSM or on Google Play™).
The TQi transmitter with the Traxxas Link Wireless Module
(part #6511, sold separately) are required.
Warranty Information
Traxxas electronic components are warranted to be free from defects
in materials and workmanship for a period of 30 days from the date of
purchase.
Limitations: Any and all warranty coverage does not cover replacement
of parts and components damaged by abuse, neglect, improper or
unreasonable use, crash damage, water or excessive moisture, chemical
damage, improper or infrequent maintenance, accident, unauthorized
alteration or modification or items that are considered consumable.
Traxxas will not pay for the cost of shipping or transportation of a defective
component to us.
Traxxas Lifetime Electronics Warranty
After the expiration date of the warranty period, Traxxas will repair
electronic components for a flat rate. Please visit Traxxas.com/support
for a current schedule of warranty costs and fees. The covered repairs are
limited to non-mechanical components that have NOT been subjected
to abuse, misuse, or neglect. Products damaged by intentional abuse,
misuse, or neglect may be subject to additional charges. Traxxas liability,
in no case, shall be greater than the actual purchase price of this product.
For replacement, product must be returned in brand new condition, with
packaging and itemized sales receipt.
This device complies with FCC Part 15 & IC RSS-210 rules
subject to the following conditions: 1) This device may
not cause harmful interference, and 2) This device must
accept all interference received, including interference
that may cause undesired operation.
For patent and patent-pending information, please visit Traxxas.com/pat
TRAXXAS.com
Traxxas, 6250 Traxxas Way, McKinney, TX 75070,
Headlights Mode Selection
Use the Mode button on the Pro Scale
Lighting Power Module to cycle through
the different lighting modes (from Low
Beam Mode to High Beam Mode to
Daytime Mode).
Hazard Lights
Use the Signal button on the Pro Scale
Lighting Power Module to turn the hazard
lights on or off.
Turn Signals
The turn signals are activated by default. To
deactivate the turn signals, press and release
the Signal button on the Pro Scale Lighting Power Module two times quickly. Both left turn signal LEDs will blink once, and then both right turn signals LEDs
will blink once to indicate that the turn signals are deactivated.
To reactivate the turn signals: Press and release the Signal button two times again quickly. Both left turn signal LEDs will blink twice, and then both right
turn signals LEDs will blink twice to indicate that the turn signals are activated.
Turn Signal Operation:
With the vehicle stopped, turn the steering wheel on the transmitter (left or right) to turn on the LEDs. The turn signal LEDs will continue to flash while the
steering wheel is turned in this same direction or remains centered. Turn the steering wheel in the opposite direction to cancel the turn signal.
AUX
POWER
IN RX INOUT
Part 6592
1
2
3
4
5
6
7
8
9
10
11
12
MOTOR
SENSOR
MAXX LINK
SIGNAL
MODE
PRO SCALE
®
LIGHTING POWER MODULE
OPERATION
WARRANTY
6V 50mA
CH1
CH2
Important: To prevent possible damage to the electronics
while using an external BEC, do not connect both the MAXX
Link Cable and Receiver Communication Cable to the Lighting
Power Module at the same time.
Lighting Power Module
ESC
Receiver
BEC Receiver
Communication
Cable
Signal
Selection Action
Hazard Lights On Press and release Signal once
Hazard Lights O Press and release Signal once again
Deactivate Turn Signals Press and release Signal 2x quickly
Activate Turn Signals Press and release Signal 2x quickly again
Mode
Selection Action
Low Beam Headlights Default
High Beam Headlights Press and release Mode
Daytime Headlights (o) Press and release Mode once again
App Store is a service mark of Apple Inc. Google Play is a trademark of Google Inc.
Mercedes-Benz®, G 500®, and G 63® are trademarks of Mercedes-Benz/Daimler AG.
Land Rover® and Defender® are trademarks of Jaguar Land Rover Limited.
Ford® and Bronco® are trademarks of Ford Motor Company.
Chevrolet® and Blazer® are trademarks of General Motors.
All copyrights and trademarks are used by Traxxas under license.
OPTIONAL MAXX LINK CABLE WIRING
Use the optional included MAXX®Link Cable
with any Traxxas TRX-4 and TRX-6 model that
includes a TQi radio system to connect the
Lighting Power Module to the receiver.
The MAXX Link Cable is designed to work
with the Traxxas Link™Wireless Module
(part #6511, sold separately) to provide
Traxxas Link App functionality for custom
lighting controls and configurations.
Some models may require a software update
for the TQi receiver via the Traxxas Link App
(Traxxas Link Wireless Module required).
Plug the MAXX Link cable into the MAXX Link
IN port on the Lighting Power Module. Use the
same wire routing from the Lighting Power
Module and into the receiver box as shown in
the Receiver Communication Cable Installation
instructions. Plug the loose end of the cable
into the expansion port on the receiver.
Traxxas Link Wireless Module
(part #6511, sold separately)
WIRING DIAGRAM WITH HIGH-OUTPUT EXTERNAL BEC
(part #2262, sold separately)
TQi Receiver
MAXX Link Cable
to Expansion Port
Servo wire to CH1
ESC wire to CH2
Pro Scale Lighting
Power Module
