Transparent POWERBANK 6 User manual

Owner’sManual

POWERBANK 6

Thank you for purchasing the Transparent PowerBank 6 (we call it P6 for short).

With this product you will

find new enjoyment from your music and film systems.We certainly have!

The PowerBank 6 is one of the finest surge protection power strips available. It features the

security of surge protection without any of the performance drawbacks normally associated with

surge protectors.Your new P6 has 6 high current, grounded outlets.Transparent PowerLink power

cords provide additional filtering and isolation when used with the P6. Transparent power products

effectively isolate components, remove line noise and modulation distortion, and suppress spikes

and surges without the use of transformers, chokes or other series filtering devices which limit cur-

rent capability and add distortions. These unique products are the most transparent way to clean

up the power going into your high end audio and video components for cleaner sound and picture

coming out.

All Transparent Power Products have a limited two year warranty on parts and labor.This war-

ranty is also extendable to five years to the original owner. Please consult your warranty card for

details.

WARNING

The PowerBank 6 must be used with the correct voltage to avoid damage

to the unit and

associated equipment. Please read the instruction manual carefully before operating your

PowerBank 6.

15 AMP

CIRCUIT BREAKER POWER ON

(green)

Indicates that power

switch is ON and that

all 6 outlets are active

PROTECTION ACTIVE

(green)

Indicates surge protection

circuitry is active

LED illuminates when

P6 is plugged in

GROUND FAULT

(red)

Indicates a ground fault

LED illuminates when

no ground is present

OFF-ON

ALL 6 OUTLETS OFF-ON VIA SWITCH POWER CORD

TRANSPARENT POWERBANK 6

INSTRUCTIONS AND NOTES

1Before plugging in the P6, be sure that it has the correct voltage for your application.The voltage

is marked on the packaging as well as on the unit itself. Use of the P6 with incorrect voltage can

result in an unsafe condition and cause damage to the unit and your equipment. Damage result-

ing from the use of the unit with improper voltage is not covered by the warranty.

2Plug the P6 directly into a grounded wall outlet. For best results, do not plug the P6 into an exten-

sion cord or other power conditioning devices.The power cord is approximately 2 meters long.

3The ON-OFF toggle switch is marked with a 0for off and a 1for on.When the switch is in the

ON position the green LED labeled POWER ON will illuminate to indicate power to all 6 outlets.

4If the P6 is plugged into a non-grounded outlet the red LINE FAULT LED will light.The P6 must

be plugged into a grounded outlet to provide common-mode surge protection.

5All 6 outlets on the P6 provide surge protection for your components.This circuitry does not add

distortions or limit current to your components.

6The green LED labeled PROTECTION ACTIVE indicates that the surge protection circuitry is

functioning properly. The LED will illuminate whenever the power switch is turned on and the P6

is plugged into an active wall outlet. If the green LED does not illuminate please contact your

Transparent dealer or Transparent Audio.

7The 15 amp circuit breaker located on the end of the P6 protects against a potentially dangerous

overload. If the circuit breaker opens during use make sure that the combined load of the compo-

nents plugged into the P6 does not exceed 15 amps and that all components are functioning properly.

Please contact your dealer or Transparent Audio if you need help with this.

83-to-2 prong adaptors or “cheater plugs” are often used to defeat undesirable ground loops. Do

not use these devices on the P6 power cord. If such adaptors are necessary to prevent hum, use

them only on the power cords of the components causing the hum at the point where they plug

into the P6.

TRANSPARENT AUDIO

CONNECTED EQUIPMENT WARRANTY

During the warranty period applicable to a Transparent surge protection device (2 years from date of purchase

extendable to 5 years upon registration) Transparent will pay to repair or, at its option, pay the fair market value of

equipment damaged by an AC power surge or lightning surge on the AC power line, on the following terms and

conditions:

The connected equipment must be used and connected to the Transparent surge protection device in accordance

with the instructions and warranty provisions applicable to the connected equipment, including proper grounding.

The connected equipment must be connected in accordance with the instructions provided with the Transparent

surge protection device.

This warranty is for the benefit of the original purchaser of the Transparent surge protection device for non-

commercial use only and is non-transferable.

This warranty is secondary to any manufacturer’s warranty on the connected equipment and/or any service

contract or insurance maintained by the customer that covers the loss in whole or in part.

Transparent shall, in its sole discretion,determine from the condition of the surge protector and the damaged equip-

ment that the damage was caused by a failure of the Transparent surge protector to properly function within its design

specifications.

This warranty is in lieu of all other warranties, express or implied, including implied warranty of merchantability and

fitness for a particular purpose. This warranty does not cover consequential damages, including loss of computer data.

TRANSPARENT POWER PRODUCTS

POWER CORDS High Performance PowerLink • PowerLink Plus • PowerLink Super •

Reference PowerLink • PowerLink XL • PowerLink MM

POWER BANKS PowerBank 1* • PowerBank 2* • PowerBank 6* • PowerBank 8*

POWER ISOLATORS PowerIsolator 4 • PowerIsolator 8 • PowerIsolator MM

HOME AUTOMATION PowerBank Control Center* • Home Automation Link*

NOTES All of our Transparent Power Products are available in European, U.K. and U.S. terminations

except for * items, which areonly available in U.S. termination.

All Transparent Power Cords and Power Banks are compatible with both 50hz and 60hz frequencies.

However, the PowerIsolator 4 and PowerIsolator XL are painstakingly tuned to a specific frequency for

maximum noise reduction; therefore, we make specific versions for 50hz and 60hz frequencies, and the units

must be used only with the power frequency for which they were designed.

Transparent Analog, Digital,Video and Power Products are designed and distributed by

TRANSPARENT AUDIO, INC.

47 INDUSTRIAL PARK ROAD • SACO ME 04072 • USA • TEL (207) 284-1100 • FAX (207) 284-1101

WWW.TRANSPARENTCABLE.COM

Popular Surge Protector manuals by other brands

ELAC

ELAC ProteK PR91-W Setup guide

Tsubaki

Tsubaki TSM4000M1 instruction manual

QVS

QVS PP134C Specification sheet

CyberPower

CyberPower CSP604T user manual

Davis Instruments

Davis Instruments Radio Surge Protector user guide

M-system

M-system MGA-100 instruction manual

CyberPower

CyberPower CSP706T user manual

CyberPower

CyberPower B300WRC1 user manual

M-system

M-system MGD-24 instruction manual

Leviton

Leviton 51120-3R Installation

Panamax

Panamax MAX 5400-EX owner's guide

CyberPower

CyberPower B1006T user manual

OBO Bettermann

OBO Bettermann ÜSM-20-230I1PE65 installation instructions

Minuteman

Minuteman MMS7120RCT user guide

Leviton

Leviton 52412-DS3 installation instructions

Savio

Savio LZ-07 user manual

Siemens

Siemens HNM3M120 manual

Mitsubishi Electric

Mitsubishi Electric LITOL LTM-125RF manual