Transition Networks SISPM1040-182D User manual

8 10/100TX + 2 10/100/1000T/Mini-GBIC
Combo with 8 PoE Injector Industrial Switch
User Manual
SISPM1040-182D
Version 1.01
October, 2009

Transition Networks SISPM1040-182D
Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
Revision History
Document
Release Date Revision Initials
1.00 Oct 31, 2008 First release A.E.F
1.01 Oct 21, 2009 Corrections A.E.F

Transition Networks SISPM1040-182D
Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
The contents of this manual are based on the table below listing
firmware version, kernel version, and hardware version. If the
switch functions are different from the description of the manual,
please contact the local sale dealer for more information.
Firmware Version
V1.00
Kernel Version
V1.56
Hardware Version
----------
Notice

Transition Networks SISPM1040-182D
Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
FCC Warning
This Equipment has been tested and found to comply with the limits for a
Class-A digital device, pursuant to Part 15 of the FCC rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy. It may cause harmful interference to radio
communications if the equipment is not installed and used in accordance
with the instructions. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
CE Mark Warning
This is a Class-A product. In a domestic environment this product may
cause radio interference in which case the user may be required to take
adequate measures.

Transition Networks SISPM1040-182D
Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
Content
Chapter 1 Introduction......................................... 1
1.1 Hardware Features...................................... 1
1.2 Software Features ....................................... 5
1.3 Package Contents ....................................... 8
Chapter 2 Hardware Description ........................ 9
2.1 Physical Dimension ..................................... 9
2.2 Front Panel.................................................. 9
2.3 Bottom View .............................................. 10
2.4 LED Indicators........................................... 11
Chapter 3 Hardware Installation ....................... 13
3.1 Installation Steps ....................................... 13
3.2 DIN-Rail Mounting ..................................... 14
3.3 Wall Mount Plate Mounting ....................... 16
3.4 Wiring the Power Inputs ............................ 17
3.5 Wiring the Fault Alarm Contact ................. 18
3.6 Cabling ...................................................... 19
Chapter 4 Network Application......................... 23
4.1 X-Ring Application..................................... 25
4.2 Coupling Ring Application ......................... 26
4.3 Dual Homing Application ........................... 27
4.4 Dual Ring Application ................................ 28
Chapter 5 Console Management ...................... 29
5.1 Connecting to the Console Port ................ 29
5.2 Pin Assignment ......................................... 29

Transition Networks SISPM1040-182D-LR
Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
5.3 Login in the Console Interface................... 30
5.4 CLI Management....................................... 32
5.5 Commands Level ...................................... 32
Chapter 6 Web-Based Management................. 34
6.1 About Web-based Management................ 34
6.2 Preparing for Web Management ............... 34
6.3 System Login............................................. 35
6.4 System Information ................................... 36
6.5 IP Configuration......................................... 37
6.6 DHCP Server............................................. 39
6.7 TFTP ......................................................... 43
6.8 System Event Log ..................................... 46
6.9 Fault Relay Alarm...................................... 52
6.10 SNTP Configuration ................................. 53
6.11 IP Security ................................................ 57
6.12 User Authentication .................................. 59
6.13 Port Statistics ........................................... 60
6.14 Port Control .............................................. 62
6.15 Port Trunk................................................. 64
6.16 Port Mirroring............................................ 74
6.17 Rate Limiting ............................................ 75
6.18 VLAN configuration .................................. 77
6.19 Rapid Spanning Tree ............................... 87
6.20 SNMP Configuration................................. 91
6.21 QoS Configuration.................................... 97

Transition Networks SISPM1040-182D-LR
Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
6.22 IGMP Configuration................................ 100
6.23 X-Ring..................................................... 102
6.24 LLDP Configuration ................................ 105
6.25 Security—802.1X/Radius Configuration. 106
6.26 MAC Address Table ............................... 110
6.27 Power over Ethernet............................... 115
6.28 Factory Default ....................................... 117
6.29 Save Configuration................................. 118
6.30 System Reboot....................................... 119
Troubles shooting ................................................. 120
Appendix A—RJ-45 Pin Assignment ................... 121
RJ-45 Pin Assignments........................................ 121
RJ-45 Pin Assignment of PoE.............................. 124
Appendix B—Command Sets............................... 126
System Commands Set ....................................... 126
Port Commands Set............................................. 128
Trunk Commands Set .......................................... 131
VLAN Commands Set.......................................... 132
Spanning Tree Commands Set............................ 134
QOS Commands Set ........................................... 137
IGMP Commands Set .......................................... 138
Mac / Filter Table Commands Set ....................... 138
SNMP Commands Set......................................... 139
Port Mirroring Commands Set ............................. 142
802.1x Commands Set ........................................ 142

Transition Networks SISPM1040-182D-LR
Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
TFTP Commands Set .......................................... 145
SystemLog, SMTP and Event Commands Set.... 145
SNTP Commands Set.......................................... 147
X-ring Commands Set.......................................... 148

Transition Networks SISPM1040-182D
Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
Chapter 1 Introduction
The 8 10/100TX + 2 10/100/1000T/Mini-GBIC Combo w/8 PoE Injectors Managed
Industrial Switch is a cost-effective solution and meets the high reliability requirements
demanded by industrial applications. Fiber can extend the connection distance to
increases the network elasticity and performance. In addition, the industrial switch
provides the PoE function for Powered Devices to receive power as well as data over
the RJ-45 cable.
1.1 Hardware Features
Standard
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX/ FX
IEEE802.3ab 1000Base-T
IEEE802.3z Gigabit fiber
IEEE802.3x Flow Control and Back Pressure
IEEE802.3ad Port trunk with LACP
IEEE802.3af Power over Ethernet
IEEE802.1d Spanning Tree/ IEEE802.1w Rapid Spanning
Tree
IEEE802.1p Class of Service
IEEE802.1Q VLAN Tag
IEEE 802.1x User Authentication (Radius)
IEEE802.1ab LLDP
Switch
Architecture
Back-plane (Switching Fabric): 5.6Gbps
Packet throughput ability(Full-Duplex): 8.3Mpps @64bytes
Transfer Rate
14,880pps for Ethernet port
148,800pps for Fast Ethernet port
1,488,000pps for Gigabit Fiber Ethernet port
Packet Buffer 1Mbits

Transition Networks SISPM1040-182D-LR
Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
2
MAC Address 8K MAC address table
Flash ROM 4Mbytes
DRAM 32Mbytes
Connector
10/100TX: 8 x RJ-45
10/100/1000T/ Mini-GBIC Combo: 2 x RJ-45 + 2 x
100/1000 SFP sockets
RS-232 connector: RJ-45 type
Network Cable
10Base-T: 2-pair UTP/STP Cat. 3, 4, 5/ 5E cable
EIA/TIA-568 100-ohm (100m)
100Base-TX: 2-pair UTP/STP Cat. 5/ 5E cable
EIA/TIA-568 100-ohm (100m)
1000Base-TX: 2-pair UTP/STP Cat. 5/ 5E cable
EIA/TIA-568 100-ohm (100m)
Optical Fiber
Distance:
Multi mode:
0 to 5 km, 1300 nm (50/125 ȝm, 800 MHz*km)
0 to 4 km, 1300 nm (62.5/125 ȝm, 500 MHz*km)
Single mode:
0 to 40 km, 1310 nm (9/125 ȝm, 3.5 PS/(nm*km))
0 to 80 km, 1550 nm (9/125 ȝm, 19 PS/(nm*km))
Min. TX Output:
Multi mode: -20 dBm
Single mode: 0 to 40 km, -5 dBm; 0 to 80 km, -5 dBm
Max. TX Output:
Multi mode: -14 dBm
Single mode: 0 to 40 km, 0 dBm; 0 to 80 km, 0 dBm
Sensitivity:
-36 to -32 dBm (Single mode); -34 to -30 dBm (Multi mode)
PoE pin
assignment
RJ-45 port # 1~# 8 support IEEE 802.3af End-point,
Alternative A mode. Per port provides 15.4W ability.
Table of contents
Other Transition Networks Network Router manuals

Transition Networks
Transition Networks S8TB User manual

Transition Networks
Transition Networks SISGM1040-162D User manual

Transition Networks
Transition Networks SRA-RAD-01 User manual

Transition Networks
Transition Networks SISPM1040-3248-L User manual

Transition Networks
Transition Networks S8TXA User manual

Transition Networks
Transition Networks SISGM1040-244 User manual

Transition Networks
Transition Networks S4224 User manual

Transition Networks
Transition Networks MIL-SW8T1GPA User manual

Transition Networks
Transition Networks SISTF10XX-140-LR(T) User manual

Transition Networks
Transition Networks SIBTF10XX-1XX-MR User manual


















