TradeVision TV-127T User manual

LCD Color Monitor

Operating Instructions

Please read this manual thoroughly before operating the unit,

and keep it for future reference.

V1.0

Proostwetering 24m

3543 AE UTRECHT

The Netherlands

Phone : +31(0)30 241 2032

Fax : +31(0)30 241 3500

Website : www.tradevision.nl

E-mail : [email protected]

www.xtravision.nl

6. Remote Control Operation

Power Switch

Call

Timer

Select AV1/AV2/AV3/AV4

PAL / AUTO / N 443 / N 358

Vertical Flip

Channel Selection Up

Less Brightness

Picture Mode

Language Selection

Horizontal Flip

1. Please align the remote control with the infrared-receiving window on the monitor to operate.

2. Never disassemble the remote control or allow it to drop, or become wet.

3. Press the control buttons firmly. Allow 2 seconds for the picture to change.

Notice

Channel Selection Down

More Brightness

MUTE (Mute):

Press to select ENABLE/MUTE sound.

CH+ (Channel Selection+):

Press to select channel/item on menu.

Press to turn picture horizontally.

(Horizontal Turning of Picture):

MENU :

Press to show menu.

CH- (Channel Selection-):

Press to select channel/item on menu.

CALL (Call):

Press to close menu.

MODE (Picture Mode):

Press to select different picture modes (PERSONAL / STANDARD / SOFT / VIVID / LIGHT).

POWER (Power Switch):

Press to turn on/off the monitor.

Press to turn picture vertically.

(Vertical Turning of Picture):

TIMER:

Press to set the timer to shut down the monitor (15, 30, 45, 60, 75, 90,105 and max 120 minutes).

SEL:

Press to select AV channels.

LANG(Language Selection):

Press to select language display of ENGLISH , JAPANESE , FRENCH, PORTUGUESE,

SPANISH , RUSSIAN , TURKISH ,GERMAN , ITALIAN , BULGARIAN or ARABIC options .

Press to decrease Brightness.

Press to increase Brightness.

SYS:

Press to select PAL / AUTO / N 443 / N 358.

Mute

www.xtravision.nl

1. Connection of AV Input Cable

Align the small end of AV conversion adapter with the

DVD jack on the front panel of the display. Then plug

in. Connect the RCA connectors to the output signal of

the video and/or audio of the DVD/ VCD player.

7. Basic Operation

2. Connection of AV Adapter and Controller Cable

Brightness increase Brightness decrease Channel selection - AV1/AV2/AV3/AV4 Selector

Remote control

sensor

Light level sensor

Power switch

Power indicator

Color LCD screen

5. Parts Identification

Mounting bracket installation

Hold the cable , align the side of jack

marked with on the female 22-pin

connector with the male 22-pin connector

marked with then firmly plug together.

Black 4 pin male for Camera1.

Black 4 pin male for Camera 2.

Black 4/5 pin male for Camera 3.

Single red wire to power wire of DC / 12-32V.

Single black wire to GND.

Single brown wire to positive power wire of the

back-up light.

Single white wire to positive power wire of left light .

Single blue wire to positive power wire of right light .

Loudspeaker

4 Black 4 pin male for Camera 4.

Single green wire to any other trigger control.

1010

Audio/Video input

Yellow RCA for video output

1111

White RCA for audio output

1212

Notice

Notes: CAM4 and DVD input can not be connected synchronously.

www.xtravision.nl

4. Accessories

Accessory supply may be different for different application.

Special Notice

Color LCD screen

Flush mount

Detaching piece

Insert the detaching piece as indicated by the white

arrow. Press in and lift up, the monitor will be released

from the flush mount.

3. Removing the Monitor:

Remove the monitor.

U- Support Bracket Center Mount Bracket

AV and Power supply

adapter cable IR Remote control

Flush Mount

Sun Shield Detaching Piece

Front Panel AV Input adapter

2. When the blue wire is connected to the positive wire of the right turn

light, the monitor automatically switches to CAM 2 (right side

camera) when the right turn indicator is activated.

1. When the white wire is connected to the positive wire of the left turn

light , the monitor automatically switches to CAM1 (left side

camera) when the left turn indicator is activated.

Angle Adjustment screw 4.Reversing Display:

Black 22 male

Blue

owBr n

hW ite

Green 4 pin male

White 4 pin male

Blue 4 pin a e m l

B ackl

Red

Black 22 pin female

w alBro n pin m e 4/5

Green

White RCA female

Yellow RCA female Yellow RCA male

White RCA male POWER VOL VOL CH MENU V1/V2/V3

Monitor

Came ra

Green RCA female

Yellow

DVD

Black 4/5 pin male for Camera 1 / Camera 2 / Camera 3 / Camera 4.

Single red wire to positive power supply of DC/12-32V.

Single black wire to GND.

Single brown wire to positive power wire of back-up light.

Single white wire to positive power wire of left light .

Single blue wire to positive power wire of right light .

Single green wire to any other trigger control.

Yellow RCA female for video output .

White RCA female for audio output.

www.xtravision.nl

2. Product Features

1. 7" TFT- LCD Color monitor.

2. Audio output: 1W.

3. Loudspeaker: one 15x24mm round loudspeaker.

4. Power supply: Automobile storage battery (12-32V).

5. Power consumption: about 12W .

6. Outer dimension: 182mm (W) × 122mm (H) × 26mm (T) (without flush mount),

198mm (W) × 138mm (H) × 31mm (T) (with flush mount).

7. Dot pitch: 0.321 (H) × 0.370 (V).

8. Resolution: 480×3 (RGB) × 234.

9. Contrast: 400:1.

10. Brightness: 350cd/m .

11. Viewing angle: U: 45 / D: 65, R/L: 65.

12. Operating temperature: -20~+70ºC,RH90%.

13. Storage temperature: -30~+80ºC, R 90%.

3. Technical Specifications

1. TFT LCD monitor with wide angle view and high resolution display.

2. Picture image may be adjusted for Horizontal, Vertical, Mirror and Normal viewing.

3. Select from 11 languages for user operation.

4. Automatic backlighting for buttons.

5. Mirror and Normal switch available.

6. Full-function remote control.

7. Multiple video formats available: PAL / AUTO/N443/N358.

8. Up to 4 AV inputs, 1 video output and 1 audio output .

9.Operates from 12 - 32V. Supports 12V or 24V automobile battery.

10.Automatically switches to back-up, left, right or front camera views.

11.On-board speaker.

Special Notice

All specifications are subject to change without notice.

8. Menu

Press MENU to display the following options and settings:

1. PICTURE

2. OPTION

3. SYSTEM

(1) Picture

VOLUME, BRIGHTNESS,CONTRAST, COLOR, SHARP, HUE (NTSC Only) options

will display on the screen as illustrated below:

Press CH- to select VOLUME.

Press / to adjust the VOLUME Level.

PICTURE

VOLUME

BRIGHT

CONTRAST

COLOR

SHARP

HUE

SELECT ADJUST

3. When the brown wire is connected to the positive wire of back-up light,

the monitor automatically switches to CAM 3 (back-up camera) when

the back-up light is turned on. The distancing grid will also be displayed.

FRONT CAM4

4.When the green wire is activated,the monitor automatically

switches to CAM4 NORMAL

www.xtravision.nl

1. Remove all the cable connections from the monitor before cleaning the unit.

2. Use a mild household detergent and clean the unit with a slightly damp,soft cloth.

Never use strong solvents such as thinner or benzine, as they might damage the finish

of the device.

CAUTION

RISK OF EL EC TR IC S HO CK

DO NOT OPE N

CAUT IO N: T O RE DU CE T HE RISK OF ELECTR IC S HO CK ,

DO NOT REM OV E CO VE R (O R BA CK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SE RV IC IN G TO Q UALIFIED SERV IC E PE RS ON NE L.

This symbol is intended to alert the user to the presence of uninsulated "dangerous

voltage" within the product's enclosure that may be of sufficient magnitude to

constitute risk of electric shock to persons.

This symbol is intended to alert the user to the presence of important operating and

maintenance (servicing) instructions in the literature accompanying the appliance.

You are cautioned that any changes or modifications not expressly approved in this manual could

void your warrantee and neccessitate expensive repairs.

CAUTION

This symbol is intended to alert the user not to waste electrical and electronic

equipment.

Declaration of conformity

This device complies with Part 15 of the FCC Rules. Operation is

subject to the following two conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any received, including

nterference that may cause undesired operation.

interference

E13

Maintenance

Press CH- to select BRIGHT.

Press / to adjust the BRIGHTNESS level.

PICTURE

VOLUME

BRIGHT

CONTRAST

COLOR

SHARP

HUE

SELECT ADJUST

(2) Option

LANG , SCALE , CAM1 , CAM2, CAM3 , CAM4 options display on the screen as illustrated below :

Press CH- to select LANG.

OPTION

SCALE

CAM1

CAM2

CAM3

CAM4

NORMAL

LANG ENG

Press / to select ENGLISH / JAPANESE / FRENCH / PORTUGUESE / SPANISH /

RUSSIAN / TURKISH / GERMAN / ITALIAN / BULGARIAN / ARABIC.

SELECT ADJUST

Notice

Notes: NTSC color system will display"HUE",PAL will not.

www.xtravision.nl

1. Precautions

Storage and Keeping

1. Do not expose the monitor to excessive heat or cold. The storage temperature of this device

is -30~+80℃, and the operating temperature is -20~+70 ℃. The humidity is Rh90%.

2. Never use this device near a bathtub, wash basin, kitchen, damp basement, swimming pool or

similar places.

3. Never use this device in environments with excessive moisture, dust or smoke.

4. Avoid dropping or striking this device.

5. Avoid using this device in enclosed spaces, areas with excessive vibration or subject to

severe impacts.

6. Never puncture, scratch or use abrasive cleaning materials on this device..

7. Do not place cables where they may be pinched or stepped on.

8. Leave at least a 2" space between the monitor and walls, cabinets or other objects to allow

adequate air circulation around the unit.

9. The monitor is not designed to be waterproof.

Operating Precautions

1. The device may be powered by a 12 or 24 volt automotive battery or vehicle electrical system

2. Observe polarity.

power s do not

Make sure all cables are connected properly. Improper cable connections may

damage the monitor. Remove the cable connection when you intend to use the unit.

1. High voltage is present within the monitor. The opening of the case should be by professionals.

2. Do not watch the video while driving unless you are monitoring the rear view camera display.

Warning!

Occasionally, a few highlights or dark spots may occur on the LCD screen. This is a very common

phenomenon in active matrix display technology, and doesn’t necessarily indicate any defects or faults.

Never try to repair this device by yourself. In case of any problems, please turn off the display at once and

notify our company or authorized dealer. The monitor is a complex device. Any disassembly or modification

may lead to damage and void the warrantee.

Special Notice

(3) System

COLOR-SYS, BLUE BACK, HORIZONTAL, VERTICAL, ZOOM functions will display on the screen as illustrated

below :

SYSTEM

BLUE BACK

HORIZONTAL

VERTICAL

ZOOM

COLOR -SYS

Press CH- to select COLOR-SYS .

OPTION

SCALE

CAM1

CAM2

CAM3

CAM4

NORMAL

LANG ENG

Press / to select NORMAL / MIRROR.

SELECT ADJUST

Press CH- to select CAM1.

SELECT ADJUST

SYSTEM

BLUE BACK

HORIZONTAL

VERTICAL

ZOOM

COLOR -SYS

SELECT ADJUST

Press / to select PAL / AUTO / N 443 / N 358.

PAL

OPTION

SCALE

CAM1

CAM2

CAM3

CAM4

NORMAL

LANG ENG

Press / to select ON / OFF. Scale refers to the reversing distance indicator displayed

on the monitor.

SELECT ADJUST

Press CH- to select SCALE.

www.xtravision.nl

Press CH- to select ZOOM.

Press / to select 0 / 1.

0 stands for 16:9

1 stands for 4:3

SYSTEM

BLUE BACK

HORIZONTAL

VERTICAL

ZOOM

COLOR -SYS PAL

SELECT ADJUST

SYSTEM

BLUE BACK

HORIZONTAL

VERTICAL

ZOOM

COLOR -SYS PAL

Press CH- to select BLUE BACK.

SELECT ADJUST

Press / to select ON / OFF.

www.xtravision.nl

Symptom Possible Causes/Solutions

No picture, no sound

No picture

No sound

Dark picture

No color

Upside down or lateral

inverted picture

No reversing function

(i.e. Picture)

Improper connection of automobile adapter. Use of un-

authorized power supply. Power switch is on OFF position.

Check whether AV cable is properly connected.

Check whether audio wire is properly connected or the sound

volume is turned off or set too low.

Check whether brightness and contrast are adjusted correctly;

Check whether the environments temperature is too low.

Adjust the color settings.

The black wire of the monitor AV cable to the reversing light may

be loose. The red wire from the monitor may be loose.

9. Troubleshooting

The symptoms described below do not necessarily mean a failure within the display.

Please check the following items before you initiate request for repair.

Use the remote control horizontal /vertical selection switch to set

proper orientation

1. Precautions

2. Features

4. Accessories

5. Parts Identification

6. Remote Control Operation

7. Basic Operation

8. Menu

(1) Picture

(2) Option

(3) System

9. Troubleshooting

Contents

3. Technical Specifications

…………………………………………………………

………………………………………………………

………………………………………

………………………………………………

……………… ………………………………………

……………………………………………

……………………………………………………

…………………………………………………………

……………………………………………………

www.xtravision.nl

Popular Monitor manuals by other brands

Linear Acoustic

Linear Acoustic LQ-1000 user guide

AOC

AOC I2579V user manual

Gateway

Gateway FPD1520 user guide

Furuno

Furuno Mu 120c Operator's manual

Asus

Asus VB171D - 17" LCD Monitor Service manual

Dell

Dell S2230MX Setting up

Philips

Philips 107C64 user manual

Dell

Dell S2409WFP user guide

EverFocus

EverFocus EN-7517E instruction manual

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Service manual

Dell

Dell Precision 7680 Connection guide

LG 50PM1M - - 50" Plasma Panel Service manual

Bosch

Bosch DDU 9 manual

Acer

Acer A231HL user manual

Philips

Philips 86BDL4152T user manual

NEC

NEC AccuSync LCD5V user manual

Emay

Emay SleepO2 user manual

IBM

IBM 6360 Product support manual