TP-Link Archer VR600v User manual

YOUR NEW MODEM SUPPORTS:

•ADSL / ADSL2 / ADSL2+

•VDSL2

•UFB

•3 x 10/100/1000 LAN ports

•1 x 10/100/1000 WAN/LAN port

•802.11 b/g/n/ac Wi-Fi

•Up to 300Mbps on 2.4 GHz

+ 1300Mbps on 5 GHz

•2 x VOIP phone ports

•1 x USB port

SUPPORT & WARRANTY

3 Years Manufacturer’s Warranty

Website: http://www.tp-link.com/support

Email: support.au@tp-link.com

24/7 Helpline: 0800 875 465

GETTING STARTED

This quick start setup guide is to help you get up and running on your new Unlimited

Internet connection.

Before you start please check you have the following items:

INSTALLING YOUR NEW

TP-LINK VR600v WIRELESS ROUTER

Step 1: Open your box and pull out the modem. Make sure you have your username

and password, we sent to you via email handy as you will need this when you reach

step 9.

Step 2: Connect the power adapter to an unused socket on your wall, with the other

end going into the port on your modem labeled ‘Power’.

Step 3: Plug the ethernet cable into the GE1 / LAN1 port on the Fibre box and the

other end to the LAN4/WAN port at the back of the modem

Step 4: Make sure to press the power button, located to the side, and ensure your

Power LED begins to glow.

NOTE:If your modem was sent out by us, it will be preconfigured and you can

just plug it in and it’s ready to go.

LOGGING INTO YOUR ROUTER

Step 5: You need to now connect to your router. This can be done either via an

Ethernet cable or via Wi-Fi.

Ethernet: Take the Ethernet cable and plug one end into the port labelled LAN1 at

the rear of your modem with the other end going into your laptop or desktop

computer’s Ethernet port. Wait for a minute while your computer connects to your

modem.

Wi-Fi: Once your router is turned on it automatically broadcast a Wi-Fi signal.

Connect to the Wi-Fi Network name (SSID) as printed on the bottom of the modem

as well as your TP-Link Wi-Fi card It should be similar to : “TP-Link_xxxx”. The

default Wi-Fi password is also printed at the bottom of the modem and on the wifi

card as well.

Step 6:Once the connection is made, open a web browser (Chrome, Firefox etc.) &

enter http://192.168.1.1 into the address bar as shown below. Once done press

enter, you will immediately be prompted to setup a new password for the first time.

Please enter your desired password and save it somewhere secure. You will require

this password every time you want to log in to your router.

CONFIGURING YOUR ROUTER

Once you have logged into your modem following the “Logging into your Router”

instructions, you can now begin to configure your router.

Step 7: Click on the Advanced tab and go to Operation Mode.

Step 8: Under Operation Mode select “Wireless Router Mode” and click Save.

(The modem will reboot after this then you will need to log in again)

Step 9: Next click Advanced on the bar up to top, then click Network on the left

then click – Internet

Step 10:Under “Internet Connections” click +Add button.

Step 11:Ensure Settings are as below:

VLAN ID: Enabled

VLAN ID: 10

Internet Connection Type: PPPoE

Username: (enter your PPP Username here)

Password: (enter your PPP Password here)

Step 5.7: Click Save

Your modem should now be configured for Fibre

1. CONFIGURING YOUR WIFI NETWORK

NAME & PASSWORD

Once you have successfully logged into the modem, Lets set up your Network Name

(SSID) & Password.

Step 6.1:Click on “Basic” tab up at the top, then click the “Wireless” tab on the left.

You will now be displayed the Wireless Settings page.

Step 6.2: Ensure the checkboxes besides 2.4 GHz or 5GHz Wireless Network are

checked.

Step 6.3: Here you can also change your wireless network name and password to

your desired name and password. Then click “Save”.

Note: If you use a wireless device to change the wireless settings, you will be disconnected after the new

settings are effective. Please write down the new SSID and password for future use.

Step 6.4: Congratulations you have now completed your configuration is complete,

Your Wifi is now secured. You can now connect to your WiFi devices using the

details you have just configured.

Other manuals for Archer VR600v

Table of contents

Other TP-Link Wireless Router manuals

TP-Link

TP-Link Archer AX3200 User manual

TP-Link

TP-Link Archer C7 User manual

TP-Link

TP-Link H5R User manual

TP-Link

TP-Link Archer C9 User manual

TP-Link

TP-Link TL-WDR4300 User manual

TP-Link

TP-Link Archer-C20 User manual

TP-Link

TP-Link TD-W8920G User manual

TP-Link

TP-Link Archer AX5400 Pro User manual

TP-Link

TP-Link M5350 User manual

TP-Link

TP-Link TL-WPA4230P User manual

TP-Link

TP-Link TL-MR3420 User manual

TP-Link

TP-Link Archer-C20 User manual

TP-Link

TP-Link Archer AX73 User manual

TP-Link

TP-Link Archer D50 User manual

TP-Link

TP-Link TL-MR3020 User manual

TP-Link

TP-Link TD-W8951NB User manual

TP-Link

TP-Link TL-WR702N User manual

TP-Link

TP-Link Archer C5400 User manual

TP-Link

TP-Link ARCHER C1200 User manual

TP-Link

TP-Link TD-W8961ND User manual

TP-Link

TP-Link M7350 User manual

TP-Link

TP-Link M5350 User manual

TP-Link

TP-Link TL-FC111PB-20 User manual

TP-Link

TP-Link TL-WR SERIES Installation guide

Popular Wireless Router manuals by other brands

Milesight

Milesight UG67 user guide

Airlogic

Airlogic AirSync Class 1 Features

Samsung

Samsung WCH730B user manual

TELEFONICA

TELEFONICA USB Adapter quick start guide

NETGEAR

NETGEAR PowerLINE WiFi 1000 Series quick start

Askey

Askey RAC2V1K user manual

Alloy

Alloy WLF2454AP-S user guide

NETGEAR

NETGEAR WNR2000v4 user manual

Hama

Hama 53120 Operating instruction

Intellinet

Intellinet 524582 user manual

Asus

Asus RT-N10P user guide

D-Link

D-Link DIR-506L Quick installation guide

Sapido

Sapido GR297n user manual

Asus

Asus DSL-N55U user guide

AMTC

AMTC WR7502 user guide

Compaq

Compaq CP-2W - iPAQ Connection Point manual

SMC Networks

SMC Networks WBR14-N2 FICHE user guide

Draytek

Draytek Vigor2120 Series user guide