TP-Link TL-WA901ND User manual

7106507509 REV1.1.0

TP-Link Technologies Co., Ltd.

Specifications are subject to change without notice. is a registered trademark of TP-Link

Technologies Co., Ltd. Other brands and product names are trademarks or registered trademarks of

their respective holders.

No part of the specifications may be reproduced in any form or by any means or used to make any

derivative such as translation, transformation, or adaptation without permission from

www.tp-link.com

Quick Installation Guide

Wireless N Access Point

CONTENTS

01 / English

06 / Български

11 / Čeština

16 / Eesti

21 / Қазақша

26 / Latviešu

31 / Lietuvių

36 / Magyar

41 / Polski

46 / Русский язык

51 / Română

56 / Slovenčina

61 / Srpski jezik/Српски језик

66 / Українська мова

English

Note: TL-WA901ND is used for demonstration in this installation guide.

Before You Start

Which mode do you need? Please refer to the table to choose a proper mode.

Scenarios Operating Modes

You want to convert your wired (Ethernet) network to a wireless network. Access Point Mode (Default Mode)

You are in a Wi-Fi dead-zone or a place with weak wireless signal. You

want to have a greater eective range of the wireless signal throughout

your home or oce.

Repeater (Range Extender) Mode

You want to link multiple local networks to the same network using

wireless connections where physical wires are inconvenient (when

connecting networks in dierent oce buildings, for example).

Bridge with AP Mode

You have a wired device with an Ethernet port and no wireless capability,

for example, a Smart TV, Media Player, or game console. You want to

connect it to the Internet wirelessly.

Client Mode

You want your devices connected to different wireless networks and

isolated by VLANs. Multi-SSID Mode

Connect the AP Device

1. Connect the AP device according to steps in the diagram.

2. Turn on the power, wait until the Power ( ) and Wireless ( ) LEDs are lit and stable, and use the

default SSID and Password printed on the product label to join the AP device’s Wi-Fi network.

English

• Access Point Mode (Default)

Note: You can enjoy internet surng now. For your wireless network security, it is recommended to change the default SSID (network name)

and the password of your Wi-Fi network. To do so, refer to Congure the AP Device.

• Repeater/Bridge with AP

Internet

Wired Router

Transforms your existing wired network to a wireless one.

TL-WA901ND's SSID

Extends the range of an existing Wi-Fi network.

Internet TL-WA901ND's SSID

English

• Client Mode

CAB

• Multi-SSID Mode

Connects your wired devices to a wireless network.

Internet Host AP's SSID

Creates multiple wireless networks to provide dierent security and VLAN groups.

Internet VLAN1

VLAN2

English

Congure the AP Device

1. Launch a web browser and enter http://tplinkap.net. Then log in using admin (all lowercase) for both

Username and Password.

2. Click Quick Setup, select your corresponding mode and click Next. Follow the step-by-step

instructions to complete the conguration.

3. Now, reconnect your devices to the AP device.

Note: In Repeater mode, the AP device’s SSID is the same as your Host AP’s.

In Client mode, only the wired connected devices can enjoy the internet surng.

In Multi-SSID mode, connect your wireless devices to the dierent Wi-Fi networks to be isolated by VLANs.

Power on via PoE Injector

Power the device with the included passive PoE injector when the device is located far from a power outlet.

Note: The passive PoE injector supports a cable length up to 30 meters due to the environment.

Internet

Passive PoE Injector

TL-WA901ND’s SSID

English

Frequently Asked Questions (FAQ)

Q1. How do I restore the AP device to its factory default settings?

With the device powered on, use a pin to press and hold the Reset button until the Power LED starts blinking, then

release the button.

Note: Upon resetting, all previous congurations will be cleared, and the AP device will reset to the default Access Point Mode.

Q2. What can I do if the login window does not appear?

• Change the computer's static IP address to obtain an IP address automatically.

• Verify if http://tplinkap.net or http://192.168.0.254 is correctly entered in the web browser.

• Use another web browser and try again.

• Reboot your AP device and try again.

• Power o your host AP and enter http://tplinkap.net into the web browser to try again.

Q3. How do I recover the AP device’s web management password or retrieve my Wi-Fi password?

• If you forget the password required to access the AP device's web management page, you must restore the AP

device to its factory default settings.

• If your forget your Wi-Fi password, but are able to access the AP device's management interface, connect a

computer or mobile device to the AP device via wired or wireless. Log in and go to Wireless > Wireless Security to

retrieve or reset your Wi-Fi password.

Q4. What can I do if my wireless is not stable?

It may be caused by too much interference, you can try the following methods:

• Set your wireless channel to a dierent one.

• Move the AP device to a new location away from Bluetooth devices and other household electronics, such as

cordless phone, microwave, and baby monitor and more, to minimize signal interference.

Български

Забележка: TL-WA901ND се използва за демонстрация в това ръководство за инсталация.

Преди да започнете

От кой режим имате нужда? Моля, вижте таблицата, за да изберете подходящия режим.

Сценарии Режими на работа

Искате да превърнете вашата кабелна (Ethernet) мрежа в безжична мрежа. Режим "Точка за достъп" (режим по

подразбиране)

Вие сте в т.нар. "мъртва Wi-Fi зона", или на място със слаб сигнал. Желаете

да имате по-ефективен обхват на безжичния сигнал в целия ваш дом или

офис.

Режим "Повторител" (Удължител на

обхват)

Искате да свържете множество локални мрежи към същата мрежа,

използвайки безжични връзки там, където физическите кабелни връзки са

неудобни (например, при свързване на мрежи в различни офис сгради).

Мост с режим "Точка за достъп"

Имате кабелно свързано устройство с Ethernet порт, без възможност

за безжична връзка, например интелигентен телевизор (Smart TV),

мултимедиен плейър, или игрална конзола. Искате да ги свържете към

интернет безжично.

Клиентски режим

Искате вашите устройства да бъдат свързани към различни безжични

мрежи и да са изолирани с VLAN мрежи. Режим Мулти-SSID

Свързване на устройство Точка за достъп

1. Свържете Точката за достъп съгласно стъпките в схемата.

2. Включете захранването, почакайте, докато светодиодите Power (Захранване) ( ) и Wireless (Безжична връзка) ( ) светнат

стабилно, и използвайте името на мрежата (SSID) и паролата намиращи се на етикета на устройството, за да се свържете към

Wi-Fi мрежата на Точката за достъп.

Български

• Режим "Точка за достъп" (по подразбиране)

Забележка: Сега можете да се наслаждавате на сърфиране в интернет. За сигурността на вашата безжична мрежа се препоръчва да смените поставените

по подразбиране SSID (името на мрежата) и паролата на вашата Wi-Fi мрежа. За целта, вижте Конфигуриране на Точка за достъп.

• Repeater/Bridge with AP

Интернет

Кабелен рутер

Превръща вашата съществуваща кабелна мрежа в безжична.

Име (SSID) на TL-WA901ND

Разширява обхвата на съществуващата Wi-Fi мрежа

Интернет Име (SSID) на TL-WA901ND

Български

• Режим Клиент

CAB

• Режим Мулти-SSID

Свързва вашите кабелни устройства към безжична мрежа.

Интернет Име (SSID) на Точката

за достъп на хоста

Създава множество безжични мрежи за предоставяне на различна степен на сигурност и VLAN групи.

Интернет VLAN1

VLAN2

Other manuals for TL-WA901ND

Table of contents

Other TP-Link Wireless Access Point manuals

TP-Link

TP-Link TL-WA7210N User manual

TP-Link

TP-Link TL-WA901ND User manual

TP-Link

TP-Link AP300 User manual

TP-Link

TP-Link Omada Pro AP9670 User manual

TP-Link

TP-Link Auranet EAP110 User manual

TP-Link

TP-Link Omada Pro User manual

TP-Link

TP-Link Auranet EAP120 User manual

TP-Link

TP-Link CPE605 User manual

TP-Link

TP-Link TL-WA701ND User manual

TP-Link

TP-Link TL-WA7510N User manual

TP-Link

TP-Link TL-WR902AC User manual

TP-Link

TP-Link Omada EAP653 User manual

TP-Link

TP-Link TL-PA4010 User manual

TP-Link

TP-Link omada OC200 User manual

TP-Link

TP-Link Auranet EAP225 User manual

TP-Link

TP-Link ARCHER-MR400 User manual

TP-Link

TP-Link Auranet EAP330 User manual

TP-Link

TP-Link 6935364097752 User manual

TP-Link

TP-Link Pharos CPE210 User manual

TP-Link

TP-Link EAP265 HD User manual

TP-Link

TP-Link EAP690E User manual

TP-Link

TP-Link Omada EAP650 User manual

TP-Link

TP-Link TL-WA901ND User manual

TP-Link

TP-Link Pharos CPE210 User manual

Popular Wireless Access Point manuals by other brands

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Quick installation guide

Ubiquiti

Ubiquiti NanoStation NSM2 quick start guide

Cisco

Cisco Aironet 1550 Series Getting started guide

Aruba

Aruba IAP-335 user guide

Advantek Networks

Advantek Networks AWN-AP-54MR user manual

IP-COM

IP-COM AP355 user guide

Buffalo

Buffalo AirStation WLA-L11G user manual

EnGenius

EnGenius EnStationACv2 user manual

D-Link

D-Link DAP-3662 Quick installation guide

xG Technology

xG Technology xMax CN1300 installation guide

Widelink

Widelink ezWave WAP-1100 Series user guide

Edimax

Edimax CAP1200 user manual

Ubiquiti

Ubiquiti LBE-5AC-Gen2 quick start guide

Aruba

Aruba AP-203R installation guide

LuXout Shades

LuXout Shades LUXSHADE MOTION manual

CreatComm

CreatComm TB5F user manual

SineDigital

SineDigital MW-1500AP(H) installation guide

Draytek

Draytek VIGORAP 902 user guide