TP-Link TL-WA801ND Manual

Other manuals for TL-WA801ND

8

Table of contents

Other TP-Link Wireless Access Point manuals

TP-Link

TP-Link AP8635-I User manual

TP-Link

TP-Link Omada EAP650 User manual

TP-Link

TP-Link TL-WA901ND User manual

TP-Link

TP-Link Omada EAP620 User manual

TP-Link

TP-Link Omada EAP615 User manual

TP-Link

TP-Link TL-WA801ND User manual

TP-Link

TP-Link TL-WA801ND User manual

TP-Link

TP-Link TL-WA3001 User manual

TP-Link

TP-Link Auranet User manual

TP-Link

TP-Link Archer AX10 User manual

TP-Link

TP-Link WR702N User manual

TP-Link

TP-Link TL-WA801N User manual

TP-Link

TP-Link Omada Pro User manual

TP-Link

TP-Link AP9635 User manual

TP-Link

TP-Link Auranet EAP115 User manual

TP-Link

TP-Link TL-WA701ND User manual

TP-Link

TP-Link Auranet EAP120 User manual

TP-Link

TP-Link Omada Pro AP9670 User manual

TP-Link

TP-Link Auranet Series User manual

TP-Link

TP-Link TL-WA1201 User manual

TP-Link

TP-Link Deco X50-PoE User manual

TP-Link

TP-Link TL-WA850RE User manual

TP-Link

TP-Link PHAROS SERIES Quick start guide

TP-Link

TP-Link Deco M5 User manual

Popular Wireless Access Point manuals by other brands

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Quick installation guide

Ubiquiti

Ubiquiti NanoStation NSM2 quick start guide

Cisco

Cisco Aironet 1550 Series Getting started guide

Aruba

Aruba IAP-335 user guide

Advantek Networks

Advantek Networks AWN-AP-54MR user manual

IP-COM

IP-COM AP355 user guide

Buffalo

Buffalo AirStation WLA-L11G user manual

EnGenius

EnGenius EnStationACv2 user manual

D-Link

D-Link DAP-3662 Quick installation guide

xG Technology

xG Technology xMax CN1300 installation guide

Widelink

Widelink ezWave WAP-1100 Series user guide

Edimax

Edimax CAP1200 user manual

Ubiquiti

Ubiquiti LBE-5AC-Gen2 quick start guide

Aruba

Aruba AP-203R installation guide

LuXout Shades

LuXout Shades LUXSHADE MOTION manual

CreatComm

CreatComm TB5F user manual

SineDigital

SineDigital MW-1500AP(H) installation guide

Draytek

Draytek VIGORAP 902 user guide

The TP-Link TL-WA801ND is a multi-function access point. This document is intended to assist with

configuring the TL-WA801ND to allow the EG3000 to communicate on an existing WiFi network.

This guide is designed only for use with a TP-WA801ND purchased through eGauge Systems

For full documentation and other support issues, please visit the TP-Link website athttp://www.tp-

link.com/. The full TP-Link manual as of the writing of this article is available here. Please visit TP-

Links website for the most up to date information.

1. Attach the included two antennas to the back of the access point. Ensure the connections

are not loose.

2. Power the TP-Link TL-WA801ND using the barrel jack or PoE (Power-over-Ethernet)

injector, and connect a computer to the access point using an Ethernet cable (if using the

PoE injector, connect the LAN port to your computer, and the POE port to the access

point).

3. Ensure all wireless interfaces are disabled on the computer (such as WiFi and Bluetooth)

and that DHCP is enabled on the Ethernet interface. Open a web browser and access the

TL-801ND by visiting

http://tplinkap.net/

4. Log in using usernameadminand passwordadminand chooseLogin.

5. ClickQuick Setupfrom the left side, thenNext.

6. Change the admin password if desired and chooseNext.

7. ChooseClientas the operation mode and pressNext.

TP-Link Access Point Setup

(TL-WA801ND)

Configuration instructions



8. Find your wireless network, and chooseConnect.

9. Enter the wireless network password and choose Next.



10. If DHCP service is on the wireless network, leave the Type asSmart IP (DHCP)and

chooseNext.





11. Verify the settings that are chosen, and choose Finish.

The access point has been configured and the eGauge may be connected via Ethernet for network

communication.



I cannot reach the eGauge on the proxy server or locally.

Verify the TP-Link access point is powered up and configured. Connect a laptop to the Ethernet

port on the TP-Link access point, disable WiFi, bluetooth and any other wireless network interfaces

and try reaching the internet.

I don't see my network listed in the quick setup network list, or the signal is weak or

inconsistent.

Ensure the two antennas are secured on the back of the unit and that the wireless network is

within range of the access point.

I do not have network access through the TP-Link access point, or the network information

has changed and I cannot access the configuration interface.

Perform a factory reset on the TP-Link access point by using a paperclip or pin and holding down

the recessed reset button on the back of the unit, release the button when all the LEDs turn off or

flash. Then, re-configure the unit using the steps in this article.

Troubleshooting

Revision #2

Created Fri, Jan 31, 2020 10:15 PM by Andrew

Updated Wed, Mar 4, 2020 7:57 PM by Andrew