TP-Link Tapo RV30C Plus User manual
User Manual
LiDAR Navigation Robot Vacuum
+ Smart Auto-Empty Dock
©2023 TP-Link 7106510313 REV1.0.0
*Images may dier from actual products.
Package Contents
HEPA Filter ×1
Auto-Empty Dock* + Dust Bag ×1
*One dust bag installed*One side brush and HEPA Filter installed
Robot Vacuum*
Side Brush ×1 Cleaning Brush ×1*
1
User Manual ×1
User Manual
*Can be found on the dustbin
Overview
Robot Vacuum
Power/Clean
Combination Button
• Press once: Start/pause cleaning.
• Press and hold for 5 seconds: Turn on/o the robot vacuum.
• Press and hold simultaneously for 5 seconds:
Enter setup mode to congure network.
• Press and hold simultaneously for 10 seconds:
Restore to factory default settings.
• Return to the dock to charge.
• Empty the bin when docked.
Dock
• Press once: Start spot cleaning.
• Press and hold for 5 seconds: Turn on/o the child lock.
Spot Cleaning/Child Lock
*For the rst use, slide the power switch from OFF to ON to turn on.
LED
• Red: Battery level < 20%; Error
• Orange: Battery level between 20% and 80%
• Green: Battery level > 80%
2
OFF ON
Cli Sensors
Power Switch
LiDAR
Side Brush
Charging Contacts
Caster Wheel
Main Brush
Main Brush Cover Latch
Wheel
Bumper
Recharge
Sensor
Buttons
& LEDs
Dustbin
Dustbin Latch
Dust Collection Port
Charging Contacts
OFF ON
3
Dust
Collection
Port
Open Dustbin
Filter
Filter Latch
Recharge
Sensor
Cover
Overview
Auto-Empty Dock
LED Indicator
Top cover
Open to install/take out the dust bag.
Put the cover back on each time you open it.
Dust Bag Compartment
Charging Contacts
Dust Collection Port
The dust in the robot vacuum will be
collected into the dust bag through the
port.
• White: Working properly
• O: Robot vacuum is connected to the dock; sleeping.
• Solid Red: Dust bag not installed; top cover not closed.
• Flashing Red: Error
Dust Bag Handle
Dust Bag
Fan Filter
4
Remove Protective Film
3
Remove Protective Strip
2
• To ensure a better user experience, make sure the area is with good Wi-Fi signals.
• Do not place it in direct sunlight. Ensure the area around the dock is free of clutter to
improve docking performance.
• To prevent the risk of your robot vacuum falling downstairs, ensure that the dock is
placed at least 1.2m (4 ft) away from stairs.
• Always keep the dock powered on, otherwise the robot vacuum will not automatically
return. And do not move the dock frequently.
1. Place the dock on a level surface, at against a wall,
without obstacles within 1.5m (4.9ft) in front and
0.5m (1.6ft) on left and right.
2. Connect the power cord to the power source.
Ensure the cable is kept tidy.
Before use, remove the protective strips on
both sides of the front bumper.
Remove the protective lm on the front bumper.
Notes
Position the Dock
1
5
0.5m (1.6ft)
0.5m (1.6ft)
1.5m (4.9ft)
Power On and Charge
4
Place the robot vacuum on the charging dock
or tap to send it back to the dock to charge.
It will return to the dock at the end of a cleaning
job and whenever it needs to recharge.
Slide the power switch from OFF to ON to turn on
your robot vacuum.
• If the power switch is in the ON position, you can also press and hold the button
for 5 seconds to turn on/o your robot vacuum.
• If the power switch is in the OFF position, the robot vacuum will automatically turn
on when it is charged on the dock, and turn o when it leaves the charging dock.
Notes
• When the LED of the charging dock ashes 3 times and then goes out, the
charging will begin.
• We recommend that you charge the robot vacuum fully for about 4 hours prior
to starting the rst cleaning job.
Notes
OFF ON
OFF ON
6
Download the Tapo App and Connect to Wi-Fi
5
1. Download the Tapo app from the App
Store or Google Play, then log in.
• Smart Maps
Create smart maps to tell your robot vacuum where
to clean.
• Cleaning Modes & Preferences
Customize vacuum power, cleaning times, and
cleaning areas.
• Scheduled Cleaning
Set an automatic cleaning schedule, then the robot
vacuum will clean automatically at the set time and
return to the dock after cleaning.
• Custom Zones & Virtual Walls
Add restricted zones and virtual walls to prevent
access to certain areas and rooms.
2. Open the Tapo app, tap + icon, and select
your model. Follow the step-by-step
instructions to easily set up your robot
vacuum.
OR
7
In the Tapo app, you can enjoy the following
functions.
Cleaning
6
• Cleaning cannot start if the battery is too low. Charge your robot vacuum rst.
• Pick up obstacles like wires, clothing, and plastic bags. Loose wires and objects
may get caught in the robot vacuum, resulting in disconnection or damage to
wires and property.
• Put away high pile carpet before cleaning. You can choose to avoid carpeted
areas in the app.
• Do not pick up the robot vacuum during cleaning.
• If the cleaning area is too small, the area may be cleaned twice.
• If the robot vacuum is paused for 10 minutes, it will automatically enter sleep
mode and the cleaning job will be canceled.
The robot vacuum will automatically explore and clean
your home in neat rows. It will return to the charging
station at the end of a cleaning job and whenever it
needs to recharge.
Notes
In Spot Cleaning mode, it will clean a rectangular area of
1.5m × 1.5m (4.9ft × 4.9ft) centered on itself.
1.5m (4.9ft)
1.5m (4.9ft)
8
Press Once
Start/pause cleaning. Start spot cleaning.
Press Once
Care and Maintenance
7
To maintain optimal performance, maintain the robot vacuum according to the following guidelines.
*Replacement frequency may vary depending on the actual situation. Parts should be replaced if visible wear appears.
Clean as needed /
/
/Once a month
Once a month
Once a month
Caster Wheel
Main Wheels
Sensors
Charging Contacts
Dustbin Clean/wash as needed
Once a week
Once a month
/
Every 2 weeks
3-6 months
/
3-6 months
6-12 months
Part Maintenance Frequency Replacement Frequency*
Filter
Side Brush
Main Brush
/ Replaced when it is fullDust Bag
9
Table of contents
Other TP-Link Vacuum Cleaner manuals
