TP-Link Archer VR600v User manual
YOUR NEW MODEM SUPPORTS:
ADSL / ADSL2 / ADSL2+
VDSL2
UFB
3 x 10/100/1000 LAN ports
1 x 10/100/1000 WAN/LAN port
802.11 b/g/n/ac Wi-Fi
Up to 300Mbps on 2.4 GHz
+ 1300Mbps on 5 GHz
2 x VOIP phone ports
1 x USB port
SUPPORT & WARRANTY
3 Years Manufacturer’s Warranty
Website: http://www.tp-link.com/support
Email: [email protected]
24/7 Helpline: 0800 875 465
GETTING STARTED
This quick start setup guide is to help you get up and running on your new Unlimited
Internet connection.
Before you start please check you have the following items:
INSTALLING YOUR NEW
TP-LINK VR600v WIRELESS ROUTER
Step 1: Open your box and pull out the modem. Make sure you have your username
and password, we sent to you via email handy as you will need this when you reach
step 9.
Step 2: Connect the power adapter to an unused socket on your wall, with the other
end going into the port on your modem labeled ‘Power’.
Step 3: Make sure the DSL cable is plugged into ADSL splitter-Filter to the
telephone jackpoint and the modem is powered on.
Step 4: Make sure to press the power button, located to the side, and ensure your
Power LED begins to glow.
NOTE:If your modem was sent out by us, it will be preconfigured and you can
just plug it in and it’s ready to go.
LOGGING INTO YOUR ROUTER
Step 5: You need to now connect to your router. This can be done either via an
Ethernet cable or via Wi-Fi.
Ethernet: Take the Ethernet cable and plug one end into the port labelled LAN1 at
the rear of your modem with the other end going into your laptop or desktop
computer’s Ethernet port. Wait for a minute while your computer connects to your
modem.
Wi-Fi: Once your router is turned on it automatically broadcast a Wi-Fi signal.
Connect to the Wi-Fi Network name (SSID) as printed on the bottom of the modem
as well as your TP-Link Wi-Fi card It should be similar to : “TP-Link_xxxx”. The
default Wi-Fi password is also printed at the bottom of the modem and on the wifi
card as well.
Step 6: Once the connection is made, open a web browser (Chrome, Firefox etc.) &
enter http://192.168.1.1 into the address bar as shown below. Once done press
enter, you will immediately be prompted to setup a new password for the first time.
Please enter your desired password and save it somewhere secure. You will require
this password every time you want to log in to your router.
CONFIGURING YOUR ROUTER
Once you have logged into your modem following the “Logging into your Router”
instructions, you can now begin to configure your router.
Step 7: Follow the quick setup guide and select time zone and the click “Next”
Step 8: Now from the ISP List select “Others” and the click “Next”
Step 9: You will now arrive at the Internet Setup page.
Ensure Settings are as below:
L2 Interface Type: VDSL
VLAN: Enabled
VLAN ID: 10
Internet Connection Type: PPPoE
Username: (enter your PPP Username here)
Password: (enter your PPP Password here)
Step 10: Once you have entered the correct details on the Internet Setup page, click
“Next”.
Step 11:You will now reach the Wireless Settings page where you will be able to
configure your Wi-Fi Network. The default values will be the same as those printed
on the back of your router and on the Wi-Fi card provided.
Here you can enable or disable, one or both of, the wireless bands as well as
change your wireless Network Name (SSID) and Password for each band to your
desired name(s) and password(s). Please write down the new SSID and Password
for future use.
Step 12: Once you are happy with the name and password for your Wi-Fi,click
“Next”.
NOTE: IF YOU USE A WIRELESS DEVICE TO CHANGE THE WIRELESS SETTINGS, YOU MAY BE
DISCONNECTED AFTER THE NEW SETTINGS ARE EFFECTIVE. PLEASE WRITE DOWN THE NEW SSID
AND PASSWORD FOR FUTURE USE.
Step 13:Congratulations! You are successfully connected to the internet and Wi-Fi
is now secured. You can now connect to your Wi-Fi devices using the details you
have just configured.
Other manuals for Archer VR600v
3
Table of contents
Other TP-Link Network Router manuals
TP-Link
TP-Link ARCHER C1200 User manual
TP-Link
TP-Link Archer C3200 User manual
TP-Link
TP-Link TD-8800 User manual
TP-Link
TP-Link TL-WR802N User manual
TP-Link
TP-Link MR0-WR941N User manual
TP-Link
TP-Link TD-8816 User manual
TP-Link
TP-Link TL-R460 User manual
TP-Link
TP-Link Deco X20-4g User manual
TP-Link
TP-Link 8840 User manual
TP-Link
TP-Link DECO X68 User manual
TP-Link
TP-Link TL-SG1008 User manual
TP-Link
TP-Link TD-W8960N User manual
TP-Link
TP-Link Archer C5400X User manual
TP-Link
TP-Link TL-WR820N User manual
TP-Link
TP-Link TD-8811 User manual
TP-Link
TP-Link TL-ER6120 User manual
TP-Link
TP-Link Archer C50 User manual
TP-Link
TP-Link Archer Air R5 User manual
TP-Link
TP-Link TL-WPA4220 TKIT User manual
TP-Link
TP-Link TP-TL-WR1043N User manual
