4
Press ENTER button when show the address menu, then adjust
the DMX address by pressing [UP] or [DOWN] button.
Press [ENTER] to confirm or pressing [ESC] to return to main
menu.
B.Setting DMX address by controller
1.Set the DMX value of channel 5 to 10-15,channel 17 to 20-26,
channel 7 to 30-36,channel 8 to 40-46,then the devices
connected to the controller will enter to the setting address mode
2. Set the DMX value of channel 1 from 0-59,then you will see
the the first number of the Address change to (channel 1
vaule)/10.
For example,when set the value of channel 1 to 20,the first DMX
address number will be 2(20/10=2).
3. Set the DMX value of channel 2 from 0-99,then you will see
the the sencond number of the Address change to (channel 2
vaule)/10.
For example,when set the value of channel 2 to 30,the first DMX
address number will be 3(30/10=3).
4.Set the DMX value of channel 3 from 0-99,then you will see the
the third number of the Address change to (channel 3 vaule)/10.
For example,when set the value of channel 1 to 40,the first DMX
address number will be 4(40/10=4).
And the DMX address you set by conctroller will be 234.
5. Set the DMX value of channel 4 to 255,then you will save the
DMX address setted by the controller.
Caution: It won’t save the address if the address number is
over 512.
6. Set the value of channel 5-8 out of the value range show on the
step 1,and the device will exit the setting address mode.
2. Configure
Setting channel mode
Select the channel mode by pressing [UP] or [DOWN] button.
Keep screen on
Select the enable/disable by pressing [UP] or [DOWN] button.
Setting this to disable will close the screen automaticly as soon
as NO operation to keyboard in 45 seconds.
