XCAM1080PHA User Manual
4
put the camera into the manual exposure mode. Exposure and Gain are available
for adjustment
4. Global Auto WB, Manual WB and ROI WB：Three white balance modes are
available to adjust the white balance of the video, which are Global Auto WB,
Manual WB and ROI WB.
l Global Auto WB mode: In global auto white balance mode, the white
balance will be calculated automatically and continuously. The new white
balance will be updated to RB sliders (G slider will remain a constant value).
l Manual WB: RB slider is used for the white balance adjustment in the
manual white balance mode. Drag mouse on different slider will change the
intensity in corresponding color channel.
l ROI WB mode: When enable the ROI white balance mode, a blue rectangle
will appear in the video like the following. The area inside the blue rectangle
will be considered as a white spot and used for the white balance operation.
This rectangle supports 2 operations by mouse, including changing the
location and the size of this rectangle. The location of the area could be
changed by dragging the rectangle using mouse to a specified location. To
change the size of the area, please put the mouse inside the rectangle first
and then screw the middle button of the mouse. If the ROI white balance
mod is selected, this rectangle will appear together with the camera panel.
To show the ROI WB rectangle, drag the mouse to the left boarder of the
screen, the camera control panel will show. If the ROI white balance mode is
selected, the ROI WB rectangle will show at the same time. If the mouse
leave the left boarder of the screen, the camera control panel will disappear
immediately. But after the camera control panel disappear, this rectangle
will stay alive for 8 seconds for later user operation. If no operation on the
rectangle, the rectangle will disappear after the 8 seconds. If operation is
being operated on the rectangle, the rectangle will be always alive.
5. Sharpness: Adjust the sharpness level of the video
6. Denoise: Adjust noise level of the video
7. Saturation: Adjust the saturation level of the video.
8. Gamma: Adjust the gamma level of the video.
9. Contrast: Adjust the contrast level of the video.
10. Power Frequency(HZ): If the microscope illumination using AC power, the light
source may have frequency that is related to the power frequency. This
frequency will result in a flicker bar in the image. Select the proper power
frequency will remove the flicker bar of the video.
