Toslink 14524 User manual

CONTENTS

SAFETY WARNINGS AND GUIDELINES.......................................................................................................................................4

INTRODUCTION................................................................................................................................................................................................5

FEATURES..............................................................................................................................................................................................................6

PACKAGE CONTENTS.................................................................................................................................................................................6

PRODUCT OVERVIEW................................................................................................................................................................................. 7

Front Panel..................................................................................................................................................................................................... 7

Rear Panel....................................................................................................................................................................................................... 7

Keypad Controllers...............................................................................................................................................................................10

IR Remote Control.................................................................................................................................................................................12

LOCATION PLANNING .............................................................................................................................................................................13

CABLE PREPARATION...............................................................................................................................................................................14

Ethernet Cables.......................................................................................................................................................................................14

Speaker Wires...........................................................................................................................................................................................15

RCA Cables...................................................................................................................................................................................................15

3.5mm TRS Cables..................................................................................................................................................................................16

Mini Toslink® Cable...............................................................................................................................................................................16

Trigger Cables ...........................................................................................................................................................................................16

RS232 Serial Cable................................................................................................................................................................................. 17

IR Emitters .................................................................................................................................................................................................... 17

INSTALLATION................................................................................................................................................................................................18

Test Installation.......................................................................................................................................................................................18

Connecting Multiple Multizone Controllers..................................................................................................................18

Connecting the Wallplate Keypad Controllers...........................................................................................................19

Connecting External Amplifiers...............................................................................................................................................20

Connecting the Speaker Wires.................................................................................................................................................20

Connecting Analog RCA Source Devices.........................................................................................................................21

Connecting Analog 3.5mm Source Device......................................................................................................................21

Connecting a Digital Optical (S/PDIF) Source Device ..........................................................................................21

Connecting a Digital Audio Source Device...................................................................................................................22

Connecting the Triggers.................................................................................................................................................................22

Connecting IR Emitters....................................................................................................................................................................22

Connecting a Computer Using RS232 ................................................................................................................................23

Connecting Power...............................................................................................................................................................................23

Test Operation.........................................................................................................................................................................................23

Final Installation.....................................................................................................................................................................................25

RS232 SERIAL CONTROL........................................................................................................................................................................26

SPECIFICATIONS...........................................................................................................................................................................................32

REGULATORY COMPLIANCE............................................................................................................................................................. 33

Notice for FCC ......................................................................................................................................................................................... 33

Notice for Industry Canada..........................................................................................................................................................34

SAFETY WARNINGS AND GUIDELINES

This device is intended for indoor use only.

Do not expose this device to water or moisture of any kind. Do not place drinks or

other containers with moisture on or near the device. If moisture does get in or on

the device, immediately unplug it from the power outlet and allow it to fully dry

before reapplying power.

Do not touch the device, the power cord, or any other connected cables with wet

hands.

Do not expose this device to excessively high temperatures. Do not place it in, on,

or near heat sources, such as a fireplace, stove, radiator, etc. Do not leave it in direct

sunlight.

This device ventilates excessive heat through the slots and openings in the case. Do

not block or cover these openings. Ensure that the device is in an open area where

it can get sufficient airflow to keep from overheating.

Do not place or install this device in an area where it can be exposed to excessive

amounts of dust, humidity, oil, smoke, or combustible vapors.

Prior to operation, check the unit and power cord for physical damage. Do not use if

physical damage has occurred.

Take care to prevent damage to the power cord. Do not allow it to become

crimped, pinched, walked on, or become tangled with other cords. Ensure that the

power cord does not present a tripping hazard.

Before plugging the unit into a power outlet, ensure that the outlet provides the

same type and level of power required by the device.

This device uses a grounded power cord and requires a ground connection for safe

operation. Ensure that the power source has a proper ground connection. Do not

modify the plug or use a "cheater" plug to bypass the ground connection.

Ensure that power is turned off and disconnected before making any electrical

connections.

Disconnect the unit from the power source when replacing the fuse. Replace the

fuse only with the same type.

Unplug this device from the power source when not in use.

Never unplug the unit by pulling on the power cord. Always grasp the connector

head or adapter body.

Remove the batteries from the controller if it will go unused for a lengthy period of

time.

Clean using a soft, dry cloth only. Do not use chemical cleaners, solvents, or

detergents. For stubborn deposits, moisten the cloth with warm water.

This device has no user serviceable parts. Do not attempt to open, service, or

modify this device.

INTRODUCTION

Thank you for purchasing this Multizone Home Audio Controller and Amplifier Kit!

This device is a full function audio system, which combines the functions of a preamplifier,

a full 6x4 audio matrix, and four 70 watt power amplifiers for driving speakers in up to four

separate zones. Additionally, up to three multizone amplifiers, including the 10761 6x6 50-

watt model, can be combined to provide full signal switching and amplification to up to 16

different speaker zones!

For best results, please read and understand this manual thoroughly before installation,

paying particular attention to the safety warnings and guidelines. Keep this manual in a

safe place for future reference.

FEATURES

Two pairs of analog stereo RCA inputs

One analog 3.5mm TRS stereo input

One combination analog 3.5mm TRS/digital optical Mini Toslink® stereo input

Two RJ45 digital inputs for use with audio source devices, such as the model 13358

Multizone Source Keypad

Four separate stereo 70-watts per channel into 4-ohms audio amplifiers

Each amplifier can be bridged to produce 140-watts into an 8-ohm load

Can be expanded with up to two additional 6x4 or 6x6 multizone controllers

PA override feature to broadcast to all zones

12-volt triggers for each zone

Includes IR remote control and four remote keypad controllers

Includes rack mount ears for installation into a standard 19" equipment rack

PACKAGE CONTENTS

After receiving the product, please inventory the contents to ensure you have all the

proper parts, as listed below.

1x 6x4 multizone home audio controller/amplifier

4x Keypad controllers

1x Keypad in-wall hub connection plate

1x Infrared remote control

1x Expansion ribbon cable

1x Rack mounting kit

1x AC power cord (IEC 60320 C13 to NEMA 5-15)

1x User's manual

PRODUCT OVERVIEW

Front Panel

1. Power Button: Depress the power button to turn the controller/amplifier on or off.

Note that when the controller is powered on, each individual zone will remain in

standby until its keypad is activated.

2. Power LED Indicator: This LED is off when the controller is powered off and

illuminates red when power is applied.

3. Zone Status LED Indicators: These multicolor LEDs illuminate blue whenever the

individual zone keypad is activated. If the amplifier is driven into distortion, the

audio signal will cut off and the LED will change color to red, indicating that you

should immediately reduce the volume level using the zone keypad.

Rear Panel

4. Preamp Outputs: Each of these four stereo pairs of RCA jacks is used to connect to a

dedicated power amplifier, instead of using the built-in amplifier.

5. Bridge Switch: Each of these slide switches is used to switch the zone between

Stereo and Bridged Mono mode. In Stereo mode you can connect 4-ohm or 8-ohm

speakers, but in Bridged Mono mode you can only connect an 8-ohm load.

6. Speaker Output: Each of these removable Euroblock terminal blocks is used to

connect a pair of speakers in Stereo mode or a single speaker in Bridged Mono

mode.

7. Source Input 1: This analog stereo RCA pair is used to connect to the line level

output of an audio device, such as a CD player. When a 12VDC trigger signal is

detected on the

System PA

input, the audio on this input is broadcast to all zones.

8. Source Input 2: This analog stereo RCA pair is used to connect to the line level

output of an audio device, such as a CD player.

9. Source Input 3: This analog stereo 3.5mm TRS jack is used to connect to the line

level output of an audio device, such as a CD player, or the headphone output of a

mobile device.

10. Source Input 4: This 3.5mm TRS jack can be used as an analog stereo audio input or

as a digital optical S/PDIF (Mini Toslink®) input. Instead of requiring a physical switch

to change modes, the controller will automatically detect the type of signal and

adjust itself accordingly.

11. Source Inputs 5 and 6: Each of these RJ45 Ethernet jacks is used to connect to a

digital audio source, such as the model 13358 Multizone Source Keypad, using Cat5e

or Cat6 cables.

12. Zone Status: Each of these 3.5mm TS jacks provides a constant 12VDC signal output

whenever the corresponding zone is active. This 12-volt signal can be used as a

trigger for motorized devices, such as projector screens, curtains, lights, etc.

13. IR Emitters: Each of these 3.5mm TS jacks is used to connect to an infrared emitter,

which can repeat an IR control signal sent from a remote keypad to control each

source device. The IR repeater function supports single-band IR signals only (those

in the 38kHz range). The ALL jack repeats the IR control signals for all source devices

to a single IR emitter.

14. System PA: This 3.5mm TS jack is used to connect to a 12VDC trigger source. When a

signal is present on this input, the audio from Source Input 1 is broadcast to all

zones.

15. System Mute In: This 3.5mm TS jack is used to connect to a 12VDC trigger source.

When a signal is present on this input, the audio output is muted for all zones.

16. System Control Out: Similar to the Zone Status jacks, this 3.5mm TS jack provides a

constant 12VDC signal output whenever any zone is active. This 12-volt signal can be

used as a trigger for motorized devices, such as projector screens, curtains, lights,

etc.

17. Expansion Input and Output: These two ribbon cable connectors are used to

connect to up to two additional 6x4 (14524) or 6x6 (10761) controllers to create up

to 16 distinct zones. Use the included ribbon cable to connect the output of one

controller to the input of the second. A third Controller can then be connected to

the output of the second.

18. AGC Switch: This slide switch controls whether Automatic Gain Control is active or

not. The automatic gain ensures that all the inputs are at the same overall volume

level.

19. Master/Slave Switch: This slide switch determines the functional assignment of this

particular controller in a multi-controller setup. Up to three controllers can be

connected, one of which must be designated the Master, with the other two being

Slave 1 and Slave 2.

20. Keypads Jack: This RJ45 Ethernet jack is used to connect the controller to the

Keypad In-wall Hub Connection Plate, which in turn connects to each individual wall

plate keypad. Use Cat5e or Cat6 Ethernet cable wired to the TIA/EIA-T568B

standard. Ethernet cables are not included.

21. RS232 Port: This DB9 (DE9) female port is used to connect to a PC to provide

automated control of the system. A full reference to the RS232 codes needed to

control the system can be found in the

RS232 Serial Control

section of this manual.

22. Voltage Select Switch: This slide switch sets the base input voltage to 115V or 230V.

The plastic cover must be removed before the switch position can be changed,

which ensures that the voltage switch cannot be accidentally set to the wrong

position. Make sure the voltage selector switch is set to the correct voltage range

before plugging the unit into a power outlet. The fuse should be replaced with the

appropriate type and size whenever the input voltage level is changed.

23. AC Power Input Socket/Fuse Holder: This combination power socket and fuse

holder uses the familiar IEC 60320 C14 style and connects using a power cord with a

C13 plug. The fuse is a 250V, 600 watt T5AL type for 115V use and a T2.5AL type for

230V use. Always change the fuse whenever the input voltage is changed.

Keypad Controllers

24. LED Display: The digital LED display shows the number of the source device, as well

as the volume, treble, and bass levels.

25. Vol. LED: When illuminated, this LED indicates that the Numeric LED is displaying

the volume level. Use the Up and Down buttons to increase and decrease the

volume level.

26. Source LED: When illuminated, this LED indicates that the Numeric LED is displaying

the source selection.

27. Ext. LED: When illuminated, this LED indicates that the Mute function is enabled or

that a PA broadcast is in progress.

Table of contents

Popular Recording Equipment manuals by other brands

KV2 Audio

KV2 Audio 500 Series user guide

Robotics Technologies

Robotics Technologies microBus-Cam II installation manual

Seca

Seca 460 quick start guide

Cognex

Cognex MVS-8000 Series Hardware manual

Mect

Mect MPNC006 Series user manual

Bad Caf

Bad Caf THE LEASH operating manual

Strymon

Strymon NIGHTSKY user manual

Mitsubishi Electric

Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U user manual

Tews Technologies

Tews Technologies TPMC465 user manual

Honeywell

Honeywell Excel 50 user guide

SeaLevel

SeaLevel COMM+8.LPCI user manual

Arturia

Arturia AUDIOFUSE STUDIO user manual

Rukra

Rukra RK-1240 quick start guide

Samson

Samson SCOM owner's manual

Dynacord

Dynacord DPS260 owner's manual

Nice

Nice Core user manual

Pyle Pro

Pyle Pro PSS8 manual

RF-System

RF-System TinyGate Assembly and user's manual