Toshiba 32CV505D User manual

SERVICE MANUAL

LCDColor Television

32CV505D Ver. 2.01

Thismodelis classified as a green product

(*1), as indicated by the underlined serialnumber.

ThisService Manualdescribes replacementpartsforthe green product. When repairing this

green product, usethe part(s)described in this manualand lead-free solder (*2).

For(*1)and (*2), referto GREENPRODUCTPROCUREMENT and LEAD-FREE

SOLDER.

©TOSHIBACORPORATION

Page

GREEN PRODUCT PROCUREMENT

The ECis actively promoting the WEEE &RoHS Directivesthatdefine standards for

recycling and reuseofWaste Electricaland Electronic Equipmentand forthe Restriction of

the use ofcertain HazardousSubstances. FromJuly 1, 2006, the RoHS Directive will

prohibitany marketing ofnewproducts containing the restricted substances.

Increasing attention is given to issues related to the globalenvironmental. Toshiba

Corporation recognizes environmentalprotection as a key managementtasks, and is doing its

utmostto enhance and improve the quality and scopeofits environmentalactivities. In line

with this, Toshibaproactively promotes GreenProcurement, and seeks topurchase and use

products, parts and materials thathave lowenvironmentalimpacts.

Green procurementofparts isnotonly confined to manufacture. The same green parts used

inmanufacture mustalso beused asreplacementparts.

Page

GREENPRODUCT PROCUREMENT

LEAD-FREE SOLDER

Thisproductis manufactured using lead-freesolderas apartofa movementwithinthe

consumerproducts industry atlarge to beenvironmentally responsible. Lead-

freesoldermust

be used in the servicing and repairofthisproduct.

The melting temperatureoflead-freesolderishigherthan thatofleaded solderby 86 F to

104 F (30 Cto40 C). Useofa soldering iron designed forlead-based solders to repair

productmade with lead

free soldermayresultin damage to the componentand orPCB being

soldered. Greatcareshould bemadeto ensure high-quality soldering when servicing this

productespecially when soldering large components, through

-hole pins, and on PCBs asthe

levelofheatrequired to meltlead-free solderishigh.

WARNING: Thisproductismanufacturedusing lead free solder.

DONOTUSELEADBASEDSOLDER TOREPAIRTHISPRODUCT!

Page

LEAD

FREE SOLDER

SAFETY INSTRUCTION

SafetyPrecaution

1.An isolation transformershould be connected in the powerlinebetween the receiver

and the ACline before any service is performed on the receiver.

2.Always disconnectthe powerplug before any disassembling ofthe product. It may

resultin electricalshock.

3.When replacing a chassisin thecabinet, always be certain thatallthe protective

devices are putback in place, such as nonmetallic controlknobs, insulating covers,

shields, isolation resistor-capacitornetwork, etc.

Always keep tools, componentsoftheproduct, etc away fromthe children, These items

may causeinjury to children.

5.Depending on the model, use an isolation transformerorwearsuitable gloves when

servicing with the poweron, and disconnectthepowerplug to avoid electricalshock

when replacing parts. In somecases, alternating currentis also impressed in the

chassis, so electricalshock ispossible ifthe chassis is contacted withthe poweron.

6.Always usethe replacementpartsspecified fortheparticularmodelwhen making

repairs. The parts used in products requirespecialsafety characteristicssuch as

WARNING: BEFORESERVICINGTHISCHASSIS,READ THE "SAFETY

PRECAUTION"AND"PRODUCTSAFETYNOTICE"INSTRUCTIONSBELOW.

WARNING: SERVICINGSHOULDNOTBEATTEMPTEDBYANYONE

UNFAMILIARWITHTHE NECESSARYPRECAUTIONSON THISRECEIVER.

THE FOLLOWINGARE THE NECESSARYPRECAUTIONSTOBEOBSERVED

BEFORESERVICINGTHISCHASSIS.

Page

inflammability, voltage resistance, etc. therefore, use only replacementparts thathave

these same characteristics. Use only the specifiedparts when the mark isindicated

in the circuitdiagramorparts list.

7.Parts mounting and routingdressing ofwiringsshould bethe sameas thatused

originally. Forsafety purposes, insulating materials such as isolation tube ortape are

sometimes used and printed circuitboardsare sometimes mounted floating. Also make

sure thatwirings is routed and clamped to avoid parts thatgenerate heatand which use

high voltage. Always followthe manufactured wiring routes /dressings.

8.Always ensure thatallinternalwirings are inaccordance beforere-assembling the

externalcasing aftera repairing completed. Do notallowinternalwiring to bepinched

by cabinets, panels, etc. Any errorin reassembly orwiring can resultin electrical

leakage, flame, etc., and may be hazardous.

NEVERremodelthe productin any way. Remodeling can resultin improperoperation,

malfunction, orelectricalleakage and flame, which may behazardous.

10.Touch currentcheck. (Aftercompleting the work, measure touch currentto preventan

electric shock.)

lPlug the ACcord directly into the ACoutlet. Do NOTuse an isolation transformer

forthis check.

lConnecta measuring network fortouch currents between each exposed metallicpart

on the setand a good earth ground such as a waterpipe.

Annex D

(normative)

Measuring network for TOUCH CURRENTS

Page

lThe potentialatany point(TOUCHCURRENT)expressed as voltage and

doesnotexceed thefollowing value:

Resistance values in orms ( ).

Input resistance : 1 M

Input capacitance : 200pF

Frequency range : 15 Hz to 1 MHz and d.c. respectively

Note: Appropriate measures should be taken to obtain the correct valuein caseof non

sinusoidal waveforms.

Themeasuring instrument is calibratedby comparing the frequency factor of with the

solid line infigure F.2 of IEC 60990 at various frequencies. A calibration curveis

constructedshowing the deviation of from theideal curve asa function of frequency.

TOUCH CURRENT = /500 (peak value).

V: Voltmeter or oscilloscope

(r.m.s. or peak reading)

Thepart orcontact of a TERMINAL is not HAZARDOUS LIVE if:

Note: The limitvalues of =0.35 V (peak) for a.c. and =1.0 Vfor d.c. correspond to

the values 0.7 mA (peak) a.c. and 2.0 mAd.c.

a) Theopen-circuit voltage should notexceed 35 V (peak) a.c. or 60 V d.c. or, if a)is not

met.

b) Themeasurementof the TOUCH CURRENTshall be carried out inaccordance with

IEC60990, with themeasuring network describedin Annex D of this standard.

TheTOUCH CURRENTexpressed as voltages and , does not exceed the

following values:

- for a.c. : =35 V(peak) and =0.35 V (peak);

- for d.c. : =1.0 V

Page

ProductSafetyNotice

Manyelectricaland mechanicalparts in this chassishave specialsafety-related

characteristics. These characteristicsareoften passed unnoticed by a visualinspection and

the protection afforded by themcannotnecessarily be obtained by using replacement

components rated forhighervoltage, wattage, etc. Replacementparts which have these

specialsafety characteristics are identified in this manualand its supplements;electrical

components having such features are identified by the internationalhazard symbols on the

schematicdiagramand theparts list.

Before replacing any ofthese components, read the partslistin this manualcarefully. The

use ofsubstitutereplacementparts which do nothave the same safety characteristics as

specified in theparts listmay create electricalshock, fire, orotherhazards.

Page

PCB LAYOUT

U06A

KEY

U03A

ASSW

U01A

POWER

U05A

MAIN

U04B RMT

U04A LED

Page

IMPORTANT NOTICE

WARNING:

Youare requested thatyoushallnot modifyoralter theinformationor data

provided hereinwithout prior writtenconsentbyToshiba.Toshiba shall not

be liabletoanybody for any damages,losses,expenses or costs,ifany,

incurred inconnection withor asaresultofsuch modification oralteration.

THE INFORMATIONORDATAHEREINSHALLBEPROVIDED"ASIS"

WITHOUTANYWARRANTYOFANYKIND, EITHEREXPRESS ORIMPLIED

WARRANTYOFMERCHANTABILITYANDFITNESSFORAPARTICULAR

PURPOSE.

Toshibashallnot be liablefor anydamages,losses,expensesorcosts,if

any,incurred inconnectionwithoras aresultofuse ofanyinformationor

dataprovided herein.

Page

WARNING

656

YCbCr16bit

Bt6018Bit

HD,VD,CLK

Sequoia

Analog

Front

End

(16port)

Video

Decoder

MUX

VBIData

Processor

DCDi

MADi

Scaling BEP

OSD

LVDS

Micro-

processor

IRI/F ADC

GPIO

Digital

InputA

HDMI

Sequoia

Regulator

EEPROM

FLASHROM

I2C

MAINBOARD

FLI32626H-AC

ACINPUT&+LowB

POWERBOARD

TIF

LCD

PANEL

PANELI/F

StandbyuCON

(LPM)DAC

AMP

HDMI

DDRRAM*1

VideoCVBS/DigitalAudioL/R

DTV8bit

IC701~IC714

Levelsift

LogicIC

PJ700

DVB-CIx1

IC107

256Mbit

DDRSDRAM

IC110

64MbitFlash

IC105

VCXO IC106

64KbitEEPROM

EBIF:ExternalBusInterface

MIF:DDRSDRAMMemoryInterface

IC100

DonauTC90403FG MIF

EBIF

M_TVRESE

X8001

20.48MHzClock

IC102

Reset

X1001

27MHzX-tal

I2C

RESET

CLK(27MHz)

CVBS

DigitalBlock

EXT3

(REAR) Composite

L/R

SoundAMP

MTS+

APRO

MSP

SPEAKER(L/R)

Headphone(L/R)

EXT1

(SCART)

CVBS

R/G/B/FB

TVOUTV

75ohm

Driver

75ohm

Driver

TVOUTL/R

EXT2

(SCART)

SY/C

TVOUTV

TVOUTL/R

L/RDVI/HDMI

REMOTE

RECEIVER

TACT

KEY

AudioL/R

UART

P950BPOWER

3.3V5V2 24V9.0V6.0V

P951BPOWER

5V1 32V

COFDM

Demod

ADCInput Audio

Mux Audio

DSP

EXT4

(REAR) R/G/B

L/R I2S

(

L/R)

IC650

AudioDAC

IC651

AudioAmp

WatchDog

Timer

Table of contents

Other Toshiba LCD TV manuals

Toshiba

Toshiba 40G300U User manual

Toshiba

Toshiba Regza C3000 Series User manual

Toshiba

Toshiba 40L1353N User manual

Toshiba

Toshiba T20DL75A User manual

Toshiba

Toshiba 52XV540U - 52" LCD TV User manual

Toshiba

Toshiba 40BV700F User manual

Toshiba

Toshiba 24SLV411U User manual

Toshiba

Toshiba Regza 42XV635D User manual

Toshiba

Toshiba 40SL412U User manual

Toshiba

Toshiba 24W1343G Setup guide

Toshiba

Toshiba 65H82 Manual

Toshiba

Toshiba 32 LK3A Series User manual

Toshiba

Toshiba 42XV540U - 42" LCD TV User manual

Toshiba

Toshiba 40XV640U User manual

Toshiba

Toshiba 40LV675D User manual

Toshiba

Toshiba 32P1400 Series User manual

Toshiba

Toshiba 19DV501B User manual

Toshiba

Toshiba Regza 47HL167 User manual

Toshiba

Toshiba 32C110U User manual

Toshiba

Toshiba 26AV550E - 26" REGZA Multisystem LCD TV User manual

Toshiba

Toshiba 32LV67U - 32" LCD TV User manual

Toshiba

Toshiba 42XV550A_560A User manual

Toshiba

Toshiba REGZA 26HL67 User manual

Toshiba

Toshiba 40E210U User manual

Popular LCD TV manuals by other brands

LG 32LC4R* Service manual

ViewSonic

ViewSonic N4200w-1 VS10945-1M Service manual

Salora

Salora 22LED1600 user manual

Samsung

Samsung LA32E420 E-manual

Dell

Dell W1900 19 Setting up

Samsung

Samsung LN40C670M1F user manual

Samsung

Samsung Series 4+ user manual

Samsung

Samsung 5 Series user manual

Grundig

Grundig 40 VLE 8230 BP manual

Philips

Philips 43PFL4901/F7 Service manual

Sony

Sony Bravia XBR-43X830C Service manual

LG 32LS350 owner's manual

VIORE

VIORE LED32VF60 Specifications

JVC

JVC LT-32A220 instructions

Philips

Philips 20TA1000/93 user manual

Philips

Philips 32PFL3158T/12 quick start guide

Sony

Sony Bravia KDL-V32XBR2 Specifications

Vizio

Vizio VP422HDTV10A - 42" Plasma TV user manual