Toro TS120 User manual
TS120 Pop-up Impact Sprinkler
Operating Manual
ii
Table of Contents
1. General 1
2. Safety 1
2.1. Use of symbols in these
operating instructions 1
2.2 Proper use 2
2.3 Clearly improper use 2
2.4 Safety information 2
2.5 Dangers of failing to observe
safety instructions 2
3. Description 3
3.1 Views TS120 Impact Sprinkler 3
3.2 Views TS120 Impact Sprinkler
with VIH and TurfCup 4
3.3 Special tools 5
4. Technical data 6
5. Assembly, set-up and installation 6
5.1 Hazard warnings 6
5.2 Installation instructions 6
5.3 TS120 Impact Sprinkler
installation diagram 7
5.5 Wiring 8
6. Start-Up and Operation 10
6.1 Potential danger 10
6.2 Start-Up 11
6.3 Arc Setting 12
7. Shut-Down and preparing
for winter 13
8 Maintenance and repair work 14
8.1 Maintenance 14
8.2 Changing the nozzles 14
8.3 Toosl for Changing
the Nozzles
15
8.4 Removing the Valve Insert 15
8.5 Removal / installation of
the Control Unit 17
9. Troubleshooting 18
1
1. General
Use of this manual assumes that you are experienced in the eld of irrigation. We have therefore kept
these instructions brief and included only the information that it is imperative for you to have to use this
product.
Any warranty claims can be accepted only if the sprinkler is used in accordance with these operating
instructions and if any defect emerges within the warranty period.
We reserve the right to make changes in line with technological advances without prior notice.
2. Safety
ese operating instructions contain some fundamental instructions that must be followed when
installing, operating, servicing and maintaining the sprinkler. It is therefore imperative that these
instructions are read by the installation contractor(s) and the relevant specialized sta / operators prior
to installation and startup.
Attention must be paid not just to the general safety information set out in this ‘Safety’ section, but also
to the special safety instructions included in the other sections.
2.1. Use of symbols in these operating instructions
Where failure to follow safety information can place individuals at risk, such information is specically
marked in these operating instructions with the following symbols:
!
General warning symbol (hazard)
Warning of potential hand injuries
Warning of potential automatic start-up
Where failure to follow this safety information can damage the sprinkler and/or impair its function, you
will see the word: WARNING!
2
2.2 Proper use
e sprinkler is used for the even distribution of water onto lawns, green spaces and sports elds laid
with natural or synthetic turf. Source water should be pre-ltered and free of any coarse or brous
contamination. e water and ambient temperatures must be within the limits specied in the technical
data (see Section 4).
2.3 Clearly improper use
• Operation of the pop-up sprinkler by unauthorized personnel.
• Operation of the sprinkler before the arc has been properly set, or when the arc has been altered
without authorization (e.g., as a result of vandalism). is can result in the water being directed away
from the target irrigation area.
2.4 Safety information
!
Read the operating instructions, especially the safety information, before starting any work
on or with the sprinkler.
e specic safety instructions appear at the start of each section.
2.5 Dangers of failing to observe safety instructions
Failure to observe safety instructions can result in serious injury and/or damage to the sprinkler and
surrounding environment. Failure to observe safety instructions can lead to the loss of warranty rights.
3
3. Description
3.1 Views TS120 Impact Sprinkler
Securing screws
Cover Cover for
Control Module
compartment
Main water
connection (1½” NPT)
Manual ON/OFF/Auto
control module
Wire inlet
openings
Housing
Guide Housing
4
Securing screw
Securing screw
Cover for
Control Module
compartment
Manual ON/OFF/Auto
control module
4” TurfCup™ (for natural turf)
Cover for
Control Module
compartment
Housing
Guide Housing
Main water
connection (1½” NPT)
Wire inlet
openings
3.2 Views TS120 Impact Sprinkler
with VIH and TurfCup™
5
3.3 Special tools
Part Number Description Function Image
RT19789 TS120 Assembly Key Assembly and
disassembly of sprinkler
head
RT15745 TS120 10mm Socket Wrench Changing driving nozzle
RT17623 TS120 Flushing Tool Safely Flushing laterals
RT17839 Snap Ring Removal Hook Removing snap ring
RT17843 TS120 Valve Insert Tool Changing valve insert
RT17844 Snap Ring Pliers Installation of snap ring
ZB98291 TS120 Split-Blade
Screwdriver
Screw / unscrew ange
and retain the screws.
RT83226 TS121 Assembly Key Disassembly of sprinkler
head and pipe axle
ZB98289 TORX-key T20 For compartment lid
screws
ZB98297 TORX-key T25 For guide housing screws
6
4. Technical data
Recommended operating pressure 75 to 120 psi
Permitted operating pressure 45 to 145 psi
WARNING! Inlet pressure at the sprinkler must never exceed 145 psi.
Inlet thread: 1½” NPT
Liquids: Water only
Liquid temperature: 104° F max.
Ambient temperature: 140° F max.
For further data see separate data sheet.
5. Assembly, set-up and installation
5.1 Hazard warnings
!
If any debris get into the sprinkler, it is possible that the sprinkler could be damaged or
destroyed. Flush out the line thoroughly before connecting the sprinkler to the water supply.
!
Any unexpected incidents at start-up can lead to serious injury from the jet of
water. Make sure the installation has been completed before turning on the
water supply.
5.2 Installation instructions
• e inlet thread connection on the TS120 pop-up sprinkler is 1½" NPT.
• For the thread seal, use a sealing compound and/or material (e.g., Teon tape). Please be sure your
sealing compound of choice is compatible with all materials at the point of connection.
• e pop-up sprinkler should be installed in accordance with the TS120 sprinkler installation diagram
(see next page). In order to avoid any load pressure on the main line, use a recommended Toro
adjustable swing joint or other pressure compatible exible connection.
• Providing a drainage pit directly connected to the drainage, as shown in the installation diagram, is
strongly recommended.
• For screwing in the connection joint, the housing or housing edge of the pop-up sprinkler can be
rmly held or clamped.
7
5.3 TS120 / TS121 Impact Sprinkler Installation Diagram
Installation with Tee Connection:
Toro TS120
or TS121
valve box
impact sprinkler
standard position
gravel packing
and drainage
Installation with Isolation Valve:
Toro solid
cover valve
box
impact sprinkler
standard position
gravel packing
and drainage
clamp
clamp
8
5.5 Wiring
e laid 2-core wire is installed for the electrical connection of the TS120 Impact Sprinkler.
e wire is pulled through the right or left opening on the bottom of the housing into the
solenoid compartment.
Use a Direct Bury Splice Kits (Toro part number
DBRY-100) to connect the control wire to the
solenoid tted inside the sprinkler.
Open the cover of the control module
compartment and connect the solenoid wire.
Use a waterproof connector kit for the connection.
Return the wires into the solenoid compartment
and close the cover.
Use one of the drain holes
to pull the control wires
into the sprinkler.
Other manuals for TS120
2
Table of contents
Other Toro Irrigation System manuals
Toro
Toro TR50XT Series Manual
Toro
Toro 570Z Series User manual
Toro
Toro OSMAC E-SERIES User manual
Toro
Toro 570Z PRX Series User manual
Toro
Toro 29516 User manual
Toro
Toro TR50 Manual
Toro
Toro SingleStream 53261 User manual
Toro
Toro IMPACT 53721 User manual
Toro
Toro FLX35 Series Quick guide
Toro
Toro 2001 Series User manual
Popular Irrigation System manuals by other brands
Hunter
Hunter Institutional Series instructions
Cellfast
Cellfast 52-305 user manual
Tyco Fire Product
Tyco Fire Product Star Galaxy SGQR instruction manual
Tyco Fire Product
Tyco Fire Product CENTRAL A instruction manual
Oral Care Technologies
Oral Care Technologies Hydro Floss Instructions for use
Reliable
Reliable F1-300 quick start guide
