TOPMAQ BJ1513 User manual

Ash Vacuum Cleaner Operation Manual

BJ1513

The appliance is dry pick-up usage only

Attention: Please read this manual carefully before installing and usage.

The important instruction:

•Check whether or not the local power supply mains matches the appliance

electric rating printed on the label before operation.

•When the appliance is not in operation, please remove plug from supply

mains.

•The plug must be removed from the socket-outlet before cleaning or

maintaining the appliance

•Don't remove the plug by pulling the power cord.

•Do not leave the appliance alone when the appliance is in work.

•This appliance can be used by children aged from 8 years and above and

persons with reduced physical, sensory or mental capabilities or lack of experience

and knowledge if they have been given supervision or instruction concerning use of

the appliance in a safe way and understand the hazards involved. Children shall not

play with the appliance. Cleaning and user maintenance shall not be made by

children without supervision

•Don't press and roll the power cord by heavy objects.

•If the supply cord is damaged, it must be replaced by the manufacturer or its

service agent or a similarly qualified person in order to avoid a hazard.

•Don't vacuum the objects as follows: liquid, inflammable and explosive

dangerous material, corrosive material and burning ash, match, and cigarette.

•Do not use the appliance to vacuum the dust harmful to health.

•Keep the appliance in dry environment.

•Don't touch the live parts in appliance.

•Only to repair the appliance by the manufacturer or its authorized service

agent.

•Do not use appliance for other than intended use.

•Pay more attention when cleaning the stairs.

•Use the accessories and spare parts only supplied by the manufacturer or its

authorized service agent.

•When use the appliance to vacuum fireplace ash, No ashes with a

temperature more than 40°C shall be vacuumed, No ashes and other objects that

the fire is not completely extinguished shall be vacuumed.

•Do not use the appliance if the filter is not installed! Do not use other filters

except the ones (fire prevention filter) attached to the appliance by manufacturer.

•For cold ash only, “Cold Ash” is ash cooled down for a sufficient time without

any pockets of embers inside. This can be confirmed by scouring the ash for pockets

of embers by using metal tools before using the ash vacuum cleaner. Cold ash does

not emit any recognizable heat.

•Substance to be vacuumed - cold ashes from fireplaces, wood/coal stoves,

ashtrays, grill.

•Empty and clean vacuum cleaner before and after vacuuming to avoid the

collection of materials that could pose a fire hazard in the vacuum cleaner.

•Do not use for the separation of health-hazardous dusts (dust classes M)

•Do not vacuum soot

•Vacuum only ashes from admissible fuels

•Do not vacuum any hot, burning or glowing objects

•Do not vacuum any objects that are hotter than > 40 °C

•Do not vacuum any flammable substances

•For ash pre-separators:

max. admissible volume flow:

max . admissible under pressure:

The function of the parts:

•Aluminum pipe: Used to vacuum ash in the fireplace (Fig. A2)

•Power switch: Control the appliance to work or stop working

I. 1）Installation of the vacuum cleaner

•Take out the appliance and accessories from the packing box, check the

accessories and whether the appliance enclosure is well-found or not. (Fig. A1)

•Loose the clasp, and take the head part from the container.

•Attach the filter set to the bottom of head part.

Fig. A3

Fig. A2

Fig. A1

1.Handle

2.Cover

3.Power switch

Air inlet

5.Soft hose

6.Tank

7.Aluminium tube

8.Fire prevention

filter

9.Fire prevention

HEPA filter

•Put the head part on the container and use the clasp to make it fixed.

•Insert the aluminum pipe into the soft tube, and another end of soft tube is

inserted into air inlet. (Fig. A1)

2) Installation of Blowing function uses

• As shown in the picture, put ①into the air outlet④and tighten it to

•the left.Put aluminum tube③into ②

II. Vacuum ash

•Only use the fire prevention filter.

•When the container is full or it feels difficult to vacuum more dust, the filter

needs to be taken out and cleaned.

•While vacuum the fireplace ash, the ash temperature must be below 40°C.

Do not vacuum the ashs that fire is not extingished! (Fig. A2)

III. After the usage (Fig. A3)

•Press the switch to turn off vacuum cleaner.

•Pull out plug.

•Roll up the power cable.

•Disassemble the soft tube from the appliance.

•Take the head part from the appliance.

•Empty the dust container and wash it.

•Use rag to dry the container.

•Take out the filter, clean and wash it carefully, and dry it in air before installed

on vacuum cleaner. (Fig. A3)

IV. Maintenance (Fig. A3)

•The container and outer shell of head part need to be cleaned frequently.

②③

④

①

•The dirty container should wash with the clear water clearly.

•The filter should wash with the clear water clearly.

•If the appliance working unsatisfactory, it is usually resulted from the jam of

soft tube or conjunction of pipes or accessories. In that case, please clean the parts

concerned.

V. Correct Disposal of this product

This marking indicates that this product should not be disposed with other

household wastes throughout the EU. To prevent possible harm to the environment

or human health from uncontrolled waste disposal, recycle it responsibly to

promote the sustainable reuse of material resources. To return your used device,

please use the return and collection systems or contact the retailer where the

product was purchased. They can take this product for environmental safe

recycling.

VI. Warranty Information

The manufacturer provides warranty in accordance with the legislation of the

customer's own country of residence, with a minimum of 1 year (Germany: 2 years),

starting from the date on which the appliance is sold to the end user.

The warranty only covers defects in material or workmanship.

The repairs under warranty may only be carried out by an authorized service centre.

When making a claim under the warranty, the original bill of purchase (with

purchase date) must be submitted.

The warranty will not apply in cases of:

- Normal wear and tear

- Incorrect use, e.g. overloading of the appliance, use of non-approved accessories

- Use of force, damage caused by external influences

- Damage caused by non-observance of the user manual, e.g. connection to an

unsuitable mains supply or non-compliance with the installation instructions

- Partially or completely dismantled appliances

Tech-date

Model Power Voltage Frequency

BJ131 600W/800W/1000W/1200W AC220V-240V 50/60HZ

Table of contents

Other TOPMAQ Vacuum Cleaner manuals

TOPMAQ

TOPMAQ LC-20ZQ User manual

Popular Vacuum Cleaner manuals by other brands

Bissell

Bissell LittleGreen Proheat 1425 Series user guide

Panasonic

Panasonic MC-YL637S147-AE Service manual

NEFF

NEFF N17XH10 0 Series instruction manual

LG A9 Series owner's manual

Oreck

Oreck Cordless Captura BK51700 Series user guide

Kogan

Kogan KAVACROBVWA user manual

Kränzle

Kränzle VENTOS 50 ID Use and maintenance

EVVO

EVVO Ai35 instruction manual

DeWalt

DeWalt DWH200D instruction manual

Pontec

Pontec Pondomatic Vacuum Cleaner operating instructions

Cleanmaxx

Cleanmaxx PC-P007E instruction manual

Exido

Exido 240-114 manual

RIDGID

RIDGID WD1685AU0 owner's manual

Ezviz

Ezviz RE4P manual

STG global

STG global TANVAC HDV3000 Operator's manual

Shark

Shark ROTATOR PRO COMPLETE NV550 Series manual

Factory

Factory M3340 operating manual

Shop-Vac

Shop-Vac VN92 SERIES user manual