3 digits, e.g. 080= 80 km/h.
Also, you need open continuous track to check the speed.
E.g. Send “123456J0,080” to turn off this function.
12.2 Low-battery alert
Send SMS “123456N0/N1,battery” to set the Low-battery
alert function.
Command SMS
J0 means turn off the function
J1 means turn on the function
Reply SMS
Reply SMS
Low battery
Now is 23%
When the battery level bellows 30%, the unit will send SMS as
“Low power! +GPS IM” to the A1, A2, A3 number.
Note: N must be capital, battery is the Low-battery
percentage, It should be<45 and 2 digits, e.g. 30= 30%.
E.g. Send “123456N0,30” to turn off this function.
12.3 GEO-FENCE alert
“123456Ixyz,aabbccddefffgghhiijkkllmmnneppp qqrrssj”
send above message to set up the geo-fence for the device
to restrict its movement area. The device will send the
message to the A1, A2, A3 numbers as “Stockade +geo
info” if the tracker enters/exits the preset zone. 5 groups
GEO-FENCE areas can be set for the tracker.
Note: I must be capital.
x=NO. of the GENFENCE(1-5)
y=1 means ON, y=0 means OFF
z=0 means go into, z=1 means go out
e=N means north latitude, e=S means south latitude
j=E means east longitude, j=W means west longitude
aa,bb,cc,dd,gg,hh,ii,kk,ll,mm,nn,qq,rr,ss must be 2 digits.03
means 3. fff,ppp must be 3 numbers.011 means 11.
E.g. The first Lat.22º45'55.49''N, Long.114º23'46.86''E
The second Lat.22º45'47.40''N, Long.:114º23'54.99''E
Command SMS
Reply SMS
GEO-Fence
Alarm SMS
Note:
the coordinate should be standard format which you can
get from the software of Google earth.
13. Set the local time
Send SMS “123456Ltime zone” to set the local time
Note: L must be capital, + in the time zone means east, - in
the time zone means west. Time zone must be 2 numbers.
So Beijing time zone should be like this: +08
E.g. send “123456L+08” to set the time to the Beijing time
send “123456L-08” to set the time to Los Angeles time
Note: Send “123456L+XX:30” to set the east XX and half
time zone.
Send “123456L-XX:30” to set the west XX and half
time zone.
E.g. send “123456L+05:30” to set the India time
14. GPRS setting
Send SMS “123456B” to get the IMEI number of the unit.
Note: B must be capital.
E.g. send SMS “123456B”
Note: Before you execute the following GPRS connection,
please submit the IMEI # to the manufacturer to register the
IMEI #.
In order to use GPRS function, the user needs to set IP, Port
and APN (Access Point Name) by sending SMS commands.
