WARRANTY
2. Connect your Smart Device (phone or tablet) tothe same 2.4GHz Wi-Fi
network that your TGWF500D dimmer will be connecting to.
3. Use your mobile device and search “TOPGREENER” from the App Store
or Google Play, then download and install it.
4. Open the App and FOLLOW THE ON-SCREEN INSTRUCTIONS to
register, log in and connect the Smart Plug to your network. Over time,
the App may be updated for a better experience or added features, so
be sure to follow the in-App instructions closely:
INITIAL SET UP FOR Wi-Fi CONTROL
LED INDICATOR ON DEVICE
1.
Connect the TGWF500D, then turn on the circuit breaker.
a.
Login tothe App
In-Wall USB Outlet
In-Wall Controller
EZ Mode
Dimmer Switch
This device is warranted to be free of material and workmanship defects for 1 year from the date of purchase. Original receipt or proof of purchase from an authorized retailer must be presented upon warranty claim. ALL claims
must be verified and approved by Top Greener, Inc. Warranties from other TOPGREENER products may vary. This warranty is nontransferable and does not cover normal wear and tear or any malfunction, failure, or defect resulting
from misuse, abuse, neglect, alteration, modification, or improper installation. To the fullest extent permitted by the applicable state law, Top Greener, Inc. shall not be liable to the purchaser or end user customer of TOPGREENER
products for direct, indirect, incidental, or consequential damages even if Top Greener, Inc. has been advised of the possibility of such damages. Top Greener, Inc’s total liability under this or any other warranty, express or implied,
is limited to repair, replacement or refund. Repair, replacement or refund are the sole and exclusive remedies for breach of warranty or any other legal theory.
Works seamlessly with Tuya IoT apps and chipsets. Use any Tuya app with any Top Greener device and use
any Tuya device with Top Greener’s app.
©2018 Top Greener, Inc. • CA, USA • www.topgreener.com • 0206180114-04
• Solid Green: Device is plugged into a power source, but it has not
been paired or device has connection problems.
•Slow Blinking Green: Device is attempting to pair with the controller
while in APN mode. When LED turns off, the device has been paired
successfully.
•Fast Blinking Green: Device is attempting to pair with the controller
while in Easy mode. When LED turns off, the device has been paired
successfully.
•Solid Blue:Device is paired and the power is turned ON.
• No Light: The device is paired and the power is turned OFF.
b.a. Navigate tothe Devices
tab and click “Add Device”
or the “+” button
c. Select the device type
“In-Wall Dimmer”.
d.When prompted to “power on the device and confirm”, push the up or
down button on the TGWF500D five times, then hold that same button on
the sixth press and the LED indicator on the device will start blinking
rapidly. When LED starts blinking, press “Confirm indicator rapidly blinks”.
e.Enter your Wi-Fi password when prompted and click on confirm.
f. After successfully adding the device, you can change the name of the
device if desired.
Configure Device in AP mode
AP mode is a secondary way to configure your device
to work on your network. Configuration in this mode
requires a connection from your smart device to the
smart switch. To do so, go to the "Add Device" screen
and click on "AP Mode" at the top of the screen and
follow the on-screen instructions.
NOTE:
By default, the app will only allow one user to
control the Switch. To add users, go to your
“profile” on the app and click on “Device Sharing”
and follow the on-screen instructions.
5 64
EZ Mode
SAFETY NOTICE
The Air Gap Switch located below the Dimmer Switch
Paddle is designed for your safety. With push
buttons switches, it is difficult to know if the switch is in
the On or the Off position without having to use a tester.
This switch eliminates the hazard of having to change a
light bulb on a possibly live fixture.
Use the Air Gap Switch to Power Off before
you change the bulb.
Please note: pressing and holding the dimmer switch paddle until the light
intensity is at the minimum setting does not turn the power OFF, you must
still tap (short press) the bottom of the dimmer switch paddle to turn the
power OFF.
