www.crescentindustrial.co.uk
EX30-OCS
1. INTRODUCTION
Congratulations with the purchase of your Topfloor orbital cleaning machine, stripping,
polishing, sanding and removing paint, coatings, adhesive residues, etc. You now have a machine
specifically designed for your intended use at your disposal. It is built in accordance with the latest
insights and most up-to-date techniques, and, provided the instructions in this manual are
followed correctly, it will give years of trouble-free use. The aim of this manual is to familiarise
yourself with operating the machine and to provide instructions for working with it safely and
guidelines for periodic maintenance. Make sure you are familiar with the contents of this manual
before starting to work with the machine so that you can use all its features optimally and safely.
This user manual, the type plate and stickers placed on the machine contain important safety
information and as such form an integral part of the delivery. If they are damaged or lost, they
must be replaced. Copies can be obtained from your supplier.
The machine is pre-assembled on delivery and is completely ready for carrying out
scrubbing/buffing/polishing work. Make sure you know how to do this work before you start
using the machine. On delivery, verbal instructions will be given about operating the machine,
safety procedures and necessary maintenance. If this is not possible, the buyer is responsible for
providing correct instructions. The machine offers a large number of possibilities for treating a
floor. Topfloor offers product training on all oscillating floor cleaning machines that are
purchased or hired. Go to www.crescentindustrial.co.uk to where all product specification data
sheets and useful video guides on how to operate the machine can be found on the product page.
2. GENERAL DESCRIPTION
EX30-OCS Oscillating Floor Cleaning Machine is designed for easily cleaning floors along
the edges, and in corners and smaller spaces. After fitting special pads, these machines can also
be used for (solvent-free!) stripping or sanding/polishing parquet floors.
The plastic surround bumper makes it possible to work in tight corners. These floor treatment
machines are unique because of the Topfloor method: the high number of oscillations of 2,800
a minute. This makes the effect of the pads unrivalled.
