Topens AT6131 User manual
Single Swing Gate Opener
User’s Manual
Model:
TOPENS Website
www.topens.com
Email: support@topens.com
AT6131 / AT12131
AT6131S / AT12131S
VER 22a
C030616
★Please read and follow all warnings, precautions and instructions before
installation and use.
★Coming with UPS01 uninterrupted power supply, this series gate opener can be
powered by AC 100-240V electricity directly. It is allowed to use additional battery
(NOT incl.) and solar panel (optional) as BACK-UP or MAIN power source with
this UPS01.
★Never connect the solar panel to the control board directly to charge the battery.
★Periodic checks of the opener are required to ensure safe operation.
★Save this manual.
CONTACT US:
Visit: www.topens.com
Please record the product model, your email address etc.
in the spaces provided below. Refer to this list when contacting TOPENS
for technical service or assistance with your automatic gate opener.
Where did you purchase? (Amazon.com; Amazon.ca: Amazon.co.uk, Amazon.de; Other, Please
Specify)
Order#
Product Model
Purchase Date
Full Name
Phone#
Email Address (VERY
IMPORTANT)
Street Address, Apartment /Unit, City, State /Province, Zip Code
Country/Region
Approximate Gate Weight
(pounds; kg: Other. Please
Specify)
Approximate Gate Length
(feet; meter; Other. Please
Specify)
Did you purchase any
accessories? (Please list
below)
Issue Details
Call: +1 (888) 750 9899 (Toll Free USA & Canada)
Table of Contents
Safety Installation Information........................................................................................................................................1
Parts List............................................................................................................................................................................ 3
Extra Parts for AT6131S / AT12131S............................................................................................................................3
Accessories Parts (Included in some models, refers to the actual package)........................................................ 4
Optional Accessories Parts List (Available at TOPENS Store)................................................................................ 4
Replacement Parts...........................................................................................................................................................5
Tools Needed:................................................................................................................................................................... 5
Technical Specifications & Features............................................................................................................................. 5
Installation Overview........................................................................................................................................................7
Preparation for Installation..............................................................................................................................................8
Install the Opener on the Gate – for Pull to Open...................................................................................................... 8
Install the Opener on the Gate – for Push to Open..................................................................................................11
Mounting of the Control Box.........................................................................................................................................14
Connection of the Power Supply................................................................................................................................. 15
Connection of the Control Board................................................................................................................................. 18
How to Program the Remote to the Opener..............................................................................................................20
How to Erase All the Remote Codes.......................................................................................................................... 20
How to Use the Remote to Operate Your Gate Opener.......................................................................................... 20
Wireless Keypad Programming................................................................................................................................... 21
Adjusting the Limit Switch.............................................................................................................................................22
Setting of the Control Board......................................................................................................................................... 22
Maintenance....................................................................................................................................................................24
Trouble Shooting............................................................................................................................................................ 24
1
Safety Installation Information
1. READ and FOLLOW all instruction.
2. The gate opener is intended for use with Class I
vehicular swing gates.
Class I denotes a vehicular gate opener (or system)
dwellings, or a garage or parking area associated
therewith.
Install the gate opener only when the opener is
appropriate for the construction and the usage class of
the gate.
3. Gate opening system designers, installers and
users must take into account the possible hazards
associated with each individual application. Improperly
designed, installed or maintained systems can create
risks for the user as well as the bystander. Gate
system design and installation must reduce public
exposure to potential hazards. All exposed pinch
points must be eliminated or guarded.
4. A gate opener can create high levels of force
during normal operation. Therefore, safety features
must be incorporated into every installation. Specific
safety features include safety sensors.
5. The gate must be properly installed and work
freely in both directions prior to the installation of the
gate opener.
6. The gate must be installed in a location so that
enough clearance is provided between the gate and
adjacent structure when opening and closing to
reduce the risk of entrapment. Swinging gates shall
not open into public access areas.
7. The opener is intended for use only on gates used
for vehicles. Pedestrians must be supplied with a
separate access opening. The pedestrian access
opening shall be designed to promote pedestrian
usage. The pedestrian access shall be located such
that persons will not come in contact with the moving
vehicular gate.
8. Pedestrians should never cross the pathway of a
moving gate. The gate opener is not acceptable for
use on any pedestrian gate. Pedestrians must be
supplied with a separate pedestrian access.
9. For an installation utilizing non-contact sensors
(safety sensors), see product manual on the
placement of non-contact sensors (safety sensors) for
each type of application.
a. Care shall be exercised to reduce the risk of
nuisance tripping, such as when a vehicle trips the
safety sensor while the gate is still moving.
b. One or more non-contact sensors (safety sensors)
shall be located where the risk of entrapment of
obstruction exists, such as the perimeter reachable by
a moving gate or barrier.
10. Never mount any device that operates the gate
opener where the user can reach over, under, around
or through the gate to operate the controls. Controls
are to be placed at least 6’ (1.8m) from any part of the
moving gate.
11. Controls intended to be used to reset an operator
after 2 sequential activations of the entrapment
protection device or devices must be located in the
line of sight of the gate, or easily accessible controls
shall have a security feature to prevent unauthorized
use. Never allow anyone to hang on or ride the gate
during the entire travel of the gate.
12. Each gate opener is provided with two safety
warning placards. The placards are to be installed on
the front and back of the gate where they are plainly
visible. The placards may be mounted using cable ties
through the four holes provided on each placard.
All warning signs and placards must be installed
where visible in the area of the gate.
2
13. To AVOID damaging gas, power, or other
underground utility lines, contact underground
utility locating companies BEFORE digging.
14. Do not permit children to play on or around the
gate and keep all controls out of their reach.
NOTE:
TOPENS Gate Operator can be used for driveway gates made by steel, wood, vinyl, and shaped as panel,
tube, and chain-link. While use on solid surface gates is NOT recommended. Solid surface gates have a high
resistance to the wind. If the wind is strong enough, the operator will obstruct and stop.
3
Parts List
Extra Parts for AT6131S / AT12131S
4
Accessories Parts (Included in some models, refers to the actual package)
Optional Accessories Parts List (Available at TOPENS Store)
M12 Remote Control
ERM12 External
Receiver
TC186-R WiFi
Smartphone Remote
Control with Camera
TC186 WiFi
Smartphone Remote
Control with Camera
TKP3 Wireless Keypad
TC175P Wired Keypad
TEW3 Vehicle Sensor
Exit Wand
HLR01 HomeLink
Remote Control Kit
TC173 Wireless Push
Button
TC147 Wired Push
Button
ET24 Electric Gate
Lock
TRF3 Reflection
Photocell Sensor
TC102 Photo Eye Beam
Sensor
JD24VY 24V Warning
Light
TSP30W 30W Solar
Panel Charging Kit
TSQ20W 20W
Solar Panel Kit
25FT Extension
5 Conductor Cable
5
Replacement Parts
EKPKMJ1B Control
Board for AT6131
/ AT12131 / AT6131S
/ AT12131S Gate Opener
ALS01 Limit Switch
AT6 Arm Actuator
AT12 Arm Actuator
UPS01 Uninterrupted
Power Supply
MK01 Hardware Kit
Tools Needed:
·Power Drill
·Tape Measure
·Open End Wrenches - 14# &17# or Adjustable Wrenches
·Wire Strippers
·C-Clamps - small, medium, and large
·Level
·Hacksaw or Heavy Duty Bolt Cutters
·Phillips Screwdriver
Technical Specifications & Features
Specifications
AT6131(S)
AT12131(S)
Input:
UPS01 AC Input: 100-240V~ 50/60Hz
Motor voltage:
24VDC
Power:
50W
80W
Current:
2A
3A
Actuator speed:
16mm/s（0.6 in/s）
Max. actuator travel:
385mm（15.2 in）
Ambient Temperature:
-20℃~ +50℃(0°F to 120°F)
Protection class:
IP44
WARNING: Changes or modifications not expressly specified by this user manual, TOPENS could void
the warranty of this equipment.
6
These specifications are subject to change without notice.
Features:
·Soft start and soft stop
·Emergency release key in case of power failure
·Fast selecting push/pull to open
·Stop in case of obstruction during gate opening.
·Reverse in case of obstruction during gate closing.
·Built in adjustable auto-close (3-120 seconds)
·Built in max. Motor running time (MRT) for multiple safety protection (40 seconds)
·Reliable electromagnetism limit for easy adjustment
·Can be equipped with a wide range of accessories
·Easy to install, and minimum maintenance requirement
NOTE: “NR" indicates this size and weight combination is NOT recommended for one arm actuator.
NOTE: Ball bearing hinges should be used on all gates weighing over 140kg (300 lbs).
7
Installation Overview
Important:
The second gate opener cable should be put into the PVC conduit (not provided)
which is buried underground .This protects the cable from lawn mowers and
string trimmers.
This manual suits for next models
3
Table of contents
Other Topens Gate Opener manuals
Topens
Topens JY9132 User manual
Topens
Topens CK2600 User manual
Topens
Topens LC1100 User manual
Topens
Topens A3131 User manual
Topens
Topens CK2500 User manual
Topens
Topens KD702 User manual
Topens
Topens HLR01 User manual
Topens
Topens DKR500 User manual
Topens
Topens CK1100 User manual
Topens
Topens DK1000 User manual
Topens
Topens CK1200 User manual
Topens
Topens CK500 User manual
Topens
Topens RK700 User manual
Topens
Topens TEW3 User manual
Topens
Topens Casar MT8012 User manual
Topens
Topens DKC500 User manual
Topens
Topens AT6132 User manual
Topens
Topens KD902 User manual
Topens
Topens BK800 User manual
Topens
Topens AT602 User manual
