During the installation, the fuel system will be disconnected resulting in gasoline leakage. Please ensure to
strictly follow the following precautions while performing the installation, or it may pose a risk of explosion or fire.
Appropriate environment to perform the installation procedures
① A well-ventilated place.
② There is no tool/equipment that could ignite a fire such as a welder, grinder, electric motor and/or a heater.
③Avoid a place where has a risk of fuel vapor accumulation when performing the installation procedures.
Do not use anything that could make a spark or ignite a fire during the installation.
① Any electric tool must not be used for the installation.
・ As a general rule, do not use for this type of job or similar.
・ Do not test the pump and/or fuel in a plastic tank.
・ Do not use a drill, grinder and/or welder.
② Preventing sparks during the installation.
・ Keep your work place spark free. (i.e.. Do not use a hammer).
Take measures to prevent static electricity and prioritize safety.
① Have a fire extinguisher readily available near the working space all the time.
② Prevent static electricity.
・ Keep the floor slip free and free from water.
・ Keep the vehicles properly earthed when changing the fuel duct and components.
③ Dispose cloth or towel that contains the fuel carefully and separately from any other waste.
Remove as much gas as possible from the gas tank before attempting the installation procedures.
Catch as much gas as possible using a cloth or towel that comes out when disconnecting the fuel lines,
not to spill on the floor.
Take precautions to prevent debris or any other foreign objects from entering the tank during the
installation.
WARNING Relating to Gasoline
8
