9.Parts drawing S-Series
280kg,360kg,500kg
2.Precautions
2.1 General Safety Precautions
The winch has been designed to give safe and dependable service if operated according
to the instructions. Please read and understand this manual before installation and
operation of the winch.
●To preventthe risk of electric shock, the power plug must be plugged into a matching
outlet and grounded in good condition.
●Nevertry to lift a load higherthan the rated cap.
●Never hitch a ride on the hook, sling orload being moving.
●Winches are notto be used forlifting orlowering people.
●Don'twork, walk or stand under an operating winch.
●Always remain in control. Never neglectthe winch while actually hoisting a load.
●While working, never stand under a lifting load or within the conveying area.
●Always look up when working around winch, there is potential danger overhead.
●Never gravitate a load free.
●Be sure to lifta load vertically. Slack may allowwires to be caught in The drum.
●Priorto starting of use, carry outthe daily checking withoutfail, and after confirming
the safety of function. If having a counter rotation incurred, make sure to correct
its rotation direction.
●Priorto lifting. Make sure to have a precise performance of brake. If any malfunction
of brake happened, stop the operation immediately.
●When load suspended in air, itwill not allowto be welding.
●Wire rope with one or more of the following defects shall be removed or replaced
immediately.
I) kink, 2) distortion, 3) corrosion, 4) Broken wires more than 1O°/,,
5). Decreasing of diameter more than 7°/,
●Stop the operation if there is any queer noise orvibration in the gear box
to be happened.
●Do not connectthe wire rope with the grounding of welding machine.
●While welding, do not have any contactwith the welding objects because of
having spark.
●Do not pullthe switch.
●Never plugging (instant reverse-winding) or inching.
●Do notoverthe shorttime ratings of the winch.
●ln orderto preventthe layer down due to overloosening of rope irregular winding,
etc., operate according to the suitable operating method.
●Use a winch byfixing so securelythatthe rope around the drum is even.
●Be sureto fix a rope in the centerof weight hook.
●Avoid catching the hook orlifting a load on a fixed obstruction.
●Always leave the pendant switch positioned immediately after use.
●Make sure thatthe load being lifting is well balanced and secured before starting.
●Avoid water splashes on the pendant switch.
●Neverwrap the load with the wire rope.
