TocLITE 8263 User manual
TocLITE®Signalling Torch
Instructions
Product code 8263
IP66
www.businessimage.co.uk www.businessimage.co.uk
The TocLITE
®
Signalling Torch has white, red and green lights for signalling, plus an
emergency headlamp function. It comes with six x AA Duracell batteries, three for
immediate use and three for back up.There is also a low-level battery indicator.
IMPORTANT - Users are instructed to always use the torch in accordance with
the relevant regulations and working practices.
Functions
Changing batteries
The low level battery indicator shows once there is a minimum of four hours battery life
remaining. Unscrew the screw cap anti-clockwise, removing the battery carriage to
replace the old batteries with new. Insert each new battery ‘+’ to ‘+’. Reload the battery
carriage, with the arrow marking pointing inwards. If inserted incorrectly battery damage
will occur. Please dispose of batteries responsibly, in accordance with Local Authority
regulations.After changing batteries, please check all torch functions to ensure the torch
is operating correctly.
Warning
Do not shine the light directly in someone’s eyes. If the light beam does shine directly in
your eyes, look away immediately.
White button
Battery screw cap Green button Low level indicator
Red button
Retaining wrist strap
1. Unscrew cap
2. Slide out battery
White light – Press the white button once to switch on, and once for off.
Red light – Press the red button once to switch on, and once for off.
Green light – With the red light already on, press and hold the green button
to switch on, release the button to switch off, the light will then revert to red.
Headlamp (only to be used with TocLITE
®
bullet attachment) – Press the
white button three times, in quick succession to switch on, and once for off.
Other TocLITE Flashlight manuals
